|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Byron Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Byron Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Byron Cemetery. We've listed the following communities based on their distance, with the closest first.
- Dickvale
(Less than 2 miles to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Dickvale. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Dickvale
- Dickvale is located in Oxford County
- West Peru
(2 miles [3.2 km] to the north)
- Jump to our Gazetteer entry for West Peru
- West Peru is located in Oxford County
- Dixfield
(3 miles [4.8 km] to the north)
- South Rumford
(3 miles [4.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for South Rumford. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for South Rumford
- South Rumford is located in Oxford County
- Peru
(4 miles [6.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Peru. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Peru
- Peru is located in Oxford County
- Population from the 2020 Census: 1,509 people
- Jump to TripAdvisor's Tourism page for Peru <3>
- Rumford
(5 miles [8 km] to the northwest)
- Sumner
(6 miles [9.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Sumner. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Sumner
- Sumner is located in Oxford County
- Population from the 2020 Census: 920 people
- Jump to TripAdvisor's Tourism page for Sumner <3>
- Mexico
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Mexico have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mexico
- Mexico is located in Oxford County
- Population from the 2020 Census: 2,635 people
- Jump to TripAdvisor's Tourism page for Mexico <3>
- Rumford Center
(7 miles [11.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Rumford Center. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Rumford Center
- Rumford Center is located in Oxford County
- Jump to TripAdvisor's Tourism page for Rumford Center <3>
- Woodstock
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Woodstock have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodstock
- Woodstock is located in Oxford County
- Population from the 2020 Census: 1,308 people
- Jump to TripAdvisor's Tourism page for Woodstock <3>
- Canton
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Canton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Canton
- Canton is located in Oxford County
- Population from the 2020 Census: 1,097 people
- Gilbertville
(8 miles [12.9 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Gilbertville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Gilbertville
- Gilbertville is located in Oxford County
- North Woodstock
(9 miles [14.5 km] to the southwest)
- Jump to our Gazetteer entry for North Woodstock
- North Woodstock is located in Oxford County
- Canton Point
(9 miles [14.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Canton Point. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Canton Point
- Canton Point is located in Oxford County
- Bryant Pond
(10 miles [16.1 km] to the southwest)
- East Sumner
(10 miles [16.1 km] to the southeast)
- Jump to our Gazetteer entry for East Sumner
- East Sumner is located in Oxford County
- East Dixfield
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for East Dixfield have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Dixfield
- East Dixfield is located in Franklin County
- Berry Mills
(10 miles [16.1 km] to the north)
- Jump to our Gazetteer entry for Berry Mills
- Berry Mills is located in Franklin County
- Hanover
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Hanover have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hanover
- Hanover is located in Oxford County
- Population from the 2020 Census: 261 people
- Jump to TripAdvisor's Tourism page for Hanover <3>
- West Paris
(11 miles [17.7 km] to the south)
- Greenville
(12 miles [19.3 km] to the southwest)
- Jump to our Gazetteer entry for Greenville
- Greenville is located in Oxford County
- North Jay
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for North Jay have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Jay
- North Jay is located in Franklin County
- Livermore
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Livermore have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Livermore
- Livermore is located in Androscoggin County
- Population from the 2020 Census: 2,131 people
- Jump to TripAdvisor's Tourism page for Livermore <3>
- Roxbury
(13 miles [20.9 km] to the northwest)
- North Livermore
(13 miles [20.9 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for North Livermore. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for North Livermore
- North Livermore is located in Androscoggin County
- Chisholm
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Chisholm have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chisholm
- Chisholm is located in Franklin County
- Jay
(13 miles [20.9 km] to the east)
- Jump to our Gazetteer entry for Jay
- Jay is located in Franklin County
- Population from the 2020 Census: 4,598 people
- Jump to TripAdvisor's Tourism page for Jay <3>
Off-the-Road Links ...
The official website for Oxford County: www.oxfordcounty.org/ The official website for State of Maine: https://www.maine.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Byron Cemetery. The point we use is located at these GPS coordinates - Latitude: 44.4848, Longitude: -70.4812 In this case, the coordinates for the Byron Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|