|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Bucks Harbor had a population of 18 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from Bucks Harbor, with the one closest to Bucks Harbor listed first.
- Larrabee
(Less than 2 miles to the north)
- Note: The GPS coordinates that we are using for Larrabee have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Larrabee
- Larrabee is located in Washington County
- Machiasport
(3 miles [4.8 km] to the north)
- Note: The GPS coordinates that we are using for Machiasport have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Machiasport
- Machiasport is located in Washington County
- Population from the 2020 Census: 961 people
- Jump to TripAdvisor's Tourism page for Machiasport <3>
- Roque Bluffs
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Roque Bluffs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roque Bluffs
- Roque Bluffs is located in Washington County
- Population from the 2020 Census: 300 people
- East Machias
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for East Machias have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Machias
- East Machias is located in Washington County
- Population from the 2020 Census: 1,305 people
- Jump to TripAdvisor's Tourism page for East Machias <3>
- North Cutler
(6 miles [9.7 km] to the east)
- Machias
(6 miles [9.7 km] to the northwest)
- Whitneyville
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Whitneyville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whitneyville
- Whitneyville is located in Washington County
- Population from the 2020 Census: 206 people
- Cutler
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Cutler have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cutler
- Cutler is located in Washington County
- Population from the 2020 Census: 522 people
- Jump to TripAdvisor's Tourism page for Cutler <3>
- Jonesboro
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Jonesboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jonesboro
- Jonesboro is located in Washington County
- Population from the 2020 Census: 597 people
- Jump to TripAdvisor's Tourism page for Jonesboro <3>
- Indian River
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Indian River have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Indian River
- Indian River is located in Washington County
- West Jonesport
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for West Jonesport have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Jonesport
- West Jonesport is located in Washington County
- Jonesport
(13 miles [20.9 km] to the southwest)
- Whiting
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Whiting have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whiting
- Whiting is located in Washington County
- Population from the 2020 Census: 485 people
- Jump to TripAdvisor's Tourism page for Whiting <3>
- Northfield
(15 miles [24.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Northfield. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Northfield
- Northfield is located in Washington County
- Population from the 2020 Census: 142 people
- Google driving directions:
- From your current location to Northfield
- From Bucks Harbor to Northfield
- Marion
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Marion have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marion
- Marion is located in Washington County
- Columbia Falls
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Columbia Falls have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Columbia Falls
- Columbia Falls is located in Washington County
- Population from the 2020 Census: 536 people
- Jump to TripAdvisor's Tourism page for Columbia Falls <3>
- South Addison
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for South Addison have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Addison
- South Addison is located in Washington County
- Epping
(18 miles [29 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Epping. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Epping
- Epping is located in Washington County
- Google driving directions:
- From your current location to Epping
- From Bucks Harbor to Epping
- Columbia
(18 miles [29 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Columbia. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Columbia
- Columbia is located in Washington County
- Population from the 2020 Census: 469 people
- Google driving directions:
- From your current location to Columbia
- From Bucks Harbor to Columbia
- West Lubec
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for West Lubec have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Lubec
- West Lubec is located in Washington County
- Dennysville
(19 miles [30.6 km] to the northeast)
- Harrington
(20 miles [32.2 km] to the west)
- Cooper
(22 miles [35.4 km] to the north)
- Note: The GPS coordinates that we are using for Cooper have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cooper
- Cooper is located in Washington County
- Population from the 2020 Census: 146 people
- West Harrington
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for West Harrington have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Harrington
- West Harrington is located in Washington County
- South Lubec
(23 miles [37 km] to the northeast)
- North Lubec
(23 miles [37 km] to the northeast)
- West Pembroke
(23 miles [37 km] to the northeast)
Off-the-Road Links ...
The official website for State of Maine: https://www.maine.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Bucks Harbor, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|