|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Ayers in the Atlas, the following communities of the 1890's would have been found near the current location of Ayers. The following communities are listed based on their distance, with the one closest to Ayers listed first.
- Charlotte
(2 miles [3.2 km] to the north)
- Note: The GPS coordinates that we are using for Charlotte have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Charlotte
- Charlotte is located in Washington County
- Population from the 2020 Census: 320 people
- West Pembroke
(3 miles [4.8 km] to the southeast)
- Jump to our Gazetteer entry for West Pembroke
- West Pembroke is located in Washington County
- Pembroke
(4 miles [6.4 km] to the southeast)
- Dennysville
(5 miles [8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Dennysville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Dennysville
- Dennysville is located in Washington County
- Population from the 2020 Census: 331 people
- Jump to TripAdvisor's Tourism page for Dennysville <3>
- Meddybemps
(6 miles [9.7 km] to the northwest)
- Perry
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Perry have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Perry
- Perry is located in Washington County
- Population from the 2020 Census: 934 people
- North Perry
(7 miles [11.3 km] to the northeast)
- Jump to our Gazetteer entry for North Perry
- North Perry is located in Washington County
- South Robbinston
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for South Robbinston have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Robbinston
- South Robbinston is located in Washington County
- Marion
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Marion have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marion
- Marion is located in Washington County
- Robbinston
(9 miles [14.5 km] to the northeast)
- Baring
(10 miles [16.1 km] to the north)
- Jump to our Gazetteer entry for Baring
- Baring is located in Washington County
- Population from the 2020 Census: 239 people
- Baring has also been known as:
- Baring Plantation
- Red Beach
(10 miles [16.1 km] to the northeast)
- Jump to our Gazetteer entry for Red Beach
- Red Beach is located in Washington County
- Calais
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Calais have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calais
- Calais is located in Washington County
- Population from the 2020 Census: 3,026 people
- Jump to TripAdvisor's Tourism page for Calais <3>
- Cooper
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Cooper have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cooper
- Cooper is located in Washington County
- Population from the 2020 Census: 146 people
- Eastport
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Eastport have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eastport
- Eastport is located in Washington County
- Population from the 2020 Census: 1,275 people
- Jump to TripAdvisor's Tourism page for Eastport <3>
- Milltown
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Milltown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milltown
- Milltown is located in Washington County
- Whiting
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Whiting have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whiting
- Whiting is located in Washington County
- Population from the 2020 Census: 485 people
- Jump to TripAdvisor's Tourism page for Whiting <3>
- North Lubec
(13 miles [20.9 km] to the southeast)
- Jump to our Gazetteer entry for North Lubec
- North Lubec is located in Washington County
- Alexander
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Alexander have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alexander
- Alexander is located in Washington County
- Population from the 2020 Census: 486 people
- Jump to TripAdvisor's Tourism page for Alexander <3>
- West Lubec
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for West Lubec have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Lubec
- West Lubec is located in Washington County
- Lubec
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Lubec have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lubec
- Lubec is located in Washington County
- Population from the 2020 Census: 1,267 people
- Jump to TripAdvisor's Tourism page for Lubec <3>
- South Lubec
(16 miles [25.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for South Lubec. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for South Lubec
- South Lubec is located in Washington County
- Baileyville
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Baileyville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Baileyville
- Baileyville is located in Washington County
- Population from the 2020 Census: 1,456 people
- Jump to TripAdvisor's Tourism page for Baileyville <3>
- Crawford
(16 miles [25.7 km] to the west)
- Note: The GPS coordinates that we are using for Crawford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crawford
- Crawford is located in Washington County
- Population from the 2020 Census: 97 people
- East Machias
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for East Machias have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Machias
- East Machias is located in Washington County
- Population from the 2020 Census: 1,305 people
- Jump to TripAdvisor's Tourism page for East Machias <3>
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Ayers, please let us know so that we can improve our accuracy. |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|