Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Johnsontown in the Atlas, the following communities of the 1890's would have been found near the current location of Johnsontown. The following communities are listed based on their distance, with the one closest to Johnsontown listed first.
- Pomona
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for Pomona
- Pomona is located in Kent County
- Crosby
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Crosby have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crosby
- Crosby is located in Kent County
- Rolphs
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Rolphs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rolphs
- Rolphs is located in Queen Anne's County
- Edesville
(5 miles [8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Edesville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Edesville
- Edesville is located in Kent County
- Fairlee
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Fairlee have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairlee
- Fairlee is located in Kent County
- Chestertown
(6 miles [9.7 km] to the northeast)
- Rock Hall
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Rock Hall have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rock Hall
- Rock Hall is located in Kent County
- Population from the 2020 Census: 1,255 people
- Jump to TripAdvisor's Tourism page for Rock Hall <4>
- Centreville
(7 miles [11.3 km] to the southeast)
- Church Hill
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Church Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Church Hill
- Church Hill is located in Queen Anne's County
- Population from the 2020 Census: 755 people
- Jump to TripAdvisor's Tourism page for Church Hill <4>
- Catlin ‑ Historic
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Catlin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Catlin
- Catlin is located in Queen Anne's County
- Melitota
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Melitota have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Melitota
- Melitota is located in Kent County
- Overton
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Overton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Overton
- Overton is located in Kent County
- Carville
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Carville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Carville
- Carville is located in Queen Anne's County
- Hayden
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Hayden have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hayden
- Hayden is located in Queen Anne's County
- Tolchester Beach
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Tolchester Beach have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tolchester Beach
- Tolchester Beach is located in Kent County
- Worton
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Worton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Worton
- Worton is located in Kent County
- Jump to TripAdvisor's Tourism page for Worton <4>
- Hanesville
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Hanesville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hanesville
- Hanesville is located in Kent County
- Queenstown
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Queenstown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Queenstown
- Queenstown is located in Queen Anne's County
- Population from the 2020 Census: 701 people
- Hope
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Hope have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hope
- Hope is located in Queen Anne's County
- Roberts
(10 miles [16.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Roberts. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Roberts
- Roberts is located in Queen Anne's County
- McGinnes
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for McGinnes have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McGinnes
- McGinnes is located in Queen Anne's County
- Roe
(11 miles [17.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Roe. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Roe
- Roe is located in Queen Anne's County
- Lynch
(11 miles [17.7 km] to the north)
- Jump to our Gazetteer entry for Lynch
- Lynch is located in Kent County
- Starr
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Starr have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Starr
- Starr is located in Queen Anne's County
- Ruthsburg
(12 miles [19.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Ruthsburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ruthsburg
- Ruthsburg is located in Queen Anne's County
- Crumpton
(12 miles [19.3 km] to the northeast)
Off-the-Road Links ...
The official website for Kent County: www.kentcounty.com/
The official website for State of Maryland: https://www.maryland.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Johnsontown, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |