Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the St. Pauls Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the St. Pauls Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the St. Pauls Cemetery. We've listed the following communities based on their distance, with the closest first.
- Cordova
(Less than 2 miles to the east)- Jump to our Gazetteer entry for Cordova
- Cordova is located in Talbot County
- Jump to TripAdvisor's Tourism page for Cordova <2>
- Woodland
(2 miles [3.2 km] to the south)- Jump to our Gazetteer entry for Woodland
- Woodland is located in Talbot County
- Tappers Corner
(2 miles [3.2 km] to the east)- Jump to our Gazetteer entry for Tappers Corner
- Tappers Corner is located in Talbot County
- Skipton
(2 miles [3.2 km] to the northwest) - Willoughby
(3 miles [4.8 km] to the north)- Note: We haven't been able to verify our GPS coordinates for Willoughby. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Willoughby
- Willoughby is located in Queen Anne's County
- Hillsboro
(4 miles [6.4 km] to the northeast) - Queen Anne
(4 miles [6.4 km] to the northeast)- Note: The GPS coordinates that we are using for Queen Anne have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Queen Anne
- Queen Anne is located in Queen Anne's County
- Population from the 2020 Census: 211 people
- Jump to TripAdvisor's Tourism page for Queen Anne <2>
- Griffin
(5 miles [8 km] to the east) - Thomas Town
(5 miles [8 km] to the northeast)- Note: The GPS coordinates that we are using for Thomas Town have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Thomas Town
- Thomas Town is located in Caroline County
- Wye Mills
(5 miles [8 km] to the northwest)- Jump to our Gazetteer entry for Wye Mills
- Wye Mills is located in Talbot County
- Jump to TripAdvisor's Tourism page for Wye Mills <2>
- Talbot Village
(6 miles [9.7 km] to the southwest)- Note: The GPS coordinates that we are using for Talbot Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Talbot Village
- Talbot Village is located in Talbot County
- Tuckahoe Springs
(6 miles [9.7 km] to the southeast)- Jump to our Gazetteer entry for Tuckahoe Springs
- Tuckahoe Springs is located in Caroline County
- Easton
(7 miles [11.3 km] to the south)- Note: The GPS coordinates that we are using for Easton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Easton
- Easton is located in Talbot County
- Population from the 2020 Census: 16,611 people
- Jump to TripAdvisor's Tourism page for Easton <2>
- Ridgely
(8 miles [12.9 km] to the northeast) - Bloomingdale
(8 miles [12.9 km] to the northwest)- Note: We haven't been able to verify our GPS coordinates for Bloomingdale. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bloomingdale
- Bloomingdale is located in Queen Anne's County
- Tunis Mills
(9 miles [14.5 km] to the southwest)- Jump to our Gazetteer entry for Tunis Mills
- Tunis Mills is located in Talbot County
- Leeds Landing
(9 miles [14.5 km] to the southwest)- Jump to our Gazetteer entry for Leeds Landing
- Leeds Landing is located in Talbot County
- Tanyard
(9 miles [14.5 km] to the south)- Jump to our Gazetteer entry for Tanyard
- Tanyard is located in Caroline County
- Denton
(9 miles [14.5 km] to the east)- Note: The GPS coordinates that we are using for Denton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Denton
- Denton is located in Caroline County
- Population from the 2020 Census: 4,538 people
- Jump to TripAdvisor's Tourism page for Denton <2>
- Ruthsburg
(9 miles [14.5 km] to the north) - Guys
(9 miles [14.5 km] to the northwest) - Kirkham
(10 miles [16.1 km] to the southwest) - Bethlehem
(10 miles [16.1 km] to the southeast)- Jump to our Gazetteer entry for Bethlehem
- Bethlehem is located in Caroline County
- Oil City
(10 miles [16.1 km] to the east)- Jump to our Gazetteer entry for Oil City
- Oil City is located in Caroline County
- Queenstown
(10 miles [16.1 km] to the northwest)- Note: The GPS coordinates that we are using for Queenstown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Queenstown
- Queenstown is located in Queen Anne's County
- Population from the 2020 Census: 701 people
Off-the-Road Links ...
The official website for Talbot County: www.co.talbot.md.us/
The official website for State of Maryland: https://www.maryland.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the St. Pauls Cemetery. The point we use is located at these GPS coordinates - Latitude: 38.8804, Longitude: -76.0147 In this case, the coordinates for the St. Pauls Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |