|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Gloucester had a population of 24,651 people in 1895 with a post office and railroad service. In 2020, Gloucester had a population of 30,539 people.
The following communities are listed based on their distance from Gloucester, with the one closest to Gloucester listed first.
- West Gloucester
(2 miles [3.2 km] to the west)
- Annisquam ‑ Historic
(2 miles [3.2 km] to the north)
- Note: The GPS coordinates that we are using for Annisquam have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Annisquam
- Annisquam is located in Essex County
- Bay View
(3 miles [4.8 km] to the north)
- Magnolia
(3 miles [4.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Magnolia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Magnolia
- Magnolia is located in Essex County
- Rockport
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Rockport have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockport
- Rockport is located in Essex County
- Population from the 2020 Census: 7,312 people
- Pigeon Cove
(4 miles [6.4 km] to the northeast)
- Lanesville
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Lanesville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lanesville
- Lanesville is located in Essex County
- Essex
(5 miles [8 km] to the west)
- South Essex
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for South Essex have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Essex
- South Essex is located in Essex County
- Manchester By The Sea
(6 miles [9.7 km] to the southwest)
- Essex Falls
(6 miles [9.7 km] to the west)
- West Manchester
(7 miles [11.3 km] to the southwest)
- Beverly Farms
(8 miles [12.9 km] to the southwest)
- Prides Crossing
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Prides Crossing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Prides Crossing
- Prides Crossing is located in Essex County
- Ipswich
(9 miles [14.5 km] to the northwest)
- Hamilton
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Hamilton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hamilton
- Hamilton is located in Essex County
- Population from the 2020 Census: 8,070 people
- Montserrat
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Montserrat have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Montserrat
- Montserrat is located in Essex County
- North Beverly
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for North Beverly have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Beverly
- North Beverly is located in Essex County
- Beverly
(11 miles [17.7 km] to the west)
- Asbury Grove
(11 miles [17.7 km] to the west)
- Wenham
(11 miles [17.7 km] to the west)
- Marblehead
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Marblehead have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marblehead
- Marblehead is located in Essex County
- Population from the 2020 Census: 20,551 people
- Rowley
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Rowley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rowley
- Rowley is located in Essex County
- Population from the 2020 Census: 6,393 people
- Danversport
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Danversport have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Danversport
- Danversport is located in Essex County
- Salem
(13 miles [20.9 km] to the southwest)
Off-the-Road Links ...
The official website for Gloucester: www.ci.gloucester.ma.us/ The official website for State of Massachusetts: https://www.mass.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Gloucester, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|