|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the St. Joseph Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the St. Joseph Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the St. Joseph Cemetery. We've listed the following communities based on their distance, with the closest first.
- Lynn
(Less than 2 miles to the southeast)
- West Lynn
(2 miles [3.2 km] to the southwest)
- East Lynn
(2 miles [3.2 km] to the southeast)
- Swampscott
(2 miles [3.2 km] to the southeast)
- Peabody
(2 miles [3.2 km] to the northeast)
- Saugus
(3 miles [4.8 km] to the southwest)
- Pleasant Hills
(3 miles [4.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Pleasant Hills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Hills
- Pleasant Hills is located in Essex County
- Salem
(3 miles [4.8 km] to the northeast)
- Franklin Park
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Franklin Park have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Franklin Park
- Franklin Park is located in Suffolk County
- West Peabody
(4 miles [6.4 km] to the northwest)
- Clifton
(4 miles [6.4 km] to the east)
- West Town Landing
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for West Town Landing have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Town Landing
- West Town Landing is located in Essex County
- Melrose
(5 miles [8 km] to the southwest)
- Nahant
(5 miles [8 km] to the southeast)
- Marblehead
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Marblehead have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marblehead
- Marblehead is located in Essex County
- Population from the 2020 Census: 20,551 people
- Danvers
(5 miles [8 km] to the north)
- Beaver Brook ‑ Historic
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Beaver Brook have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beaver Brook
- Beaver Brook is located in Essex County
- Lynnfield
(5 miles [8 km] to the northwest)
- Montrose
(5 miles [8 km] to the west)
- Wakefield
(5 miles [8 km] to the west)
- Wyoming
(6 miles [9.7 km] to the southwest)
- Revere
(6 miles [9.7 km] to the southwest)
- Brigadoon Village
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Brigadoon Village have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brigadoon Village
- Brigadoon Village is located in Essex County
- Beverly
(6 miles [9.7 km] to the northeast)
- Hathorne
(6 miles [9.7 km] to the north)
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the St. Joseph Cemetery. The point we use is located at these GPS coordinates - Latitude: 42.4925, Longitude: -70.9603 |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|