RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Kentucky >> Whitley County >> Packard >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Kentucky

The Commemorative Quarter for Kentucky





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Packard (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Packard. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Packard is located in Whitley County.

To see how the shape of Kentucky's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Whitley County: Bell, Knox, Laurel, McCreary, Campbell (TN) & Claiborne (TN).

Below are the counties that are near Packard. For each of these counties, we show a sample of those communities that are closest to Packard:

  • Whitley County     (The home county of Packard)
    • The following are listed by their distance from Packard, with the one closest to Packard listed first.
    • Nevisdale
      (Less than 2 miles to the north)
      • Jump to our Gazetteer entry for Nevisdale
      • Nevisdale is located in Whitley County
    • Verne
      (3 miles [4.8 km] to the north)
      • Jump to our Gazetteer entry for Verne
      • Verne is located in Whitley County
    • Lot
      (4 miles [6.4 km] to the south)
      • Jump to our Gazetteer entry for Lot
      • Lot is located in Whitley County
    • Saxton
      (4 miles [6.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Saxton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saxton
      • Saxton is located in Whitley County
    • Pleasant View
      (4 miles [6.4 km] to the west)
      • Note: The GPS coordinates that we are using for Pleasant View have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pleasant View
      • Pleasant View is located in Whitley County
    • Siler
      (5 miles [8 km] to the east)
      • Jump to our Gazetteer entry for Siler
      • Siler is located in Whitley County
    • Emlyn
      (5 miles [8 km] to the northwest)
      • Jump to our Gazetteer entry for Emlyn
      • Emlyn is located in Whitley County
    • Fairview
      (5 miles [8 km] to the southwest)
      • Jump to our Gazetteer entry for Fairview
      • Fairview is located in Whitley County
    • Red Ash
      (5 miles [8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Red Ash have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Red Ash
      • Red Ash is located in Whitley County
    • Louden
      (6 miles [9.7 km] to the north)
      • Jump to our Gazetteer entry for Louden
      • Louden is located in Whitley County
    • Williamsburg
      (7 miles [11.3 km] to the northwest)
    • Ayers
      (9 miles [14.5 km] to the west)
      • Jump to our Gazetteer entry for Ayers
      • Ayers is located in Whitley County
  • Bell County
    • The following are listed by their distance from Packard, with the one closest to Packard listed first.
    • Pearl
      (6 miles [9.7 km] to the east)
      • Note: The GPS coordinates that we are using for Pearl have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pearl
      • Pearl is located in Bell County
    • Frakes
      (7 miles [11.3 km] to the east)
      • Jump to our Gazetteer entry for Frakes
      • Frakes is located in Bell County
    • Fonde
      (10 miles [16.1 km] to the southeast)
      • Jump to our Gazetteer entry for Fonde
      • Fonde is located in Bell County
    • Pruden
      (10 miles [16.1 km] to the southeast)
      • Jump to our Gazetteer entry for Pruden
      • Pruden is located in Bell County
    • Capito
      (12 miles [19.3 km] to the east)
      • Note: The GPS coordinates that we are using for Capito have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Capito
      • Capito is located in Bell County
    • Ingram
      (14 miles [22.5 km] to the east)
      • Note: The GPS coordinates that we are using for Ingram have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ingram
      • Ingram is located in Bell County
    • Edgewood
      (15 miles [24.1 km] to the east)
      • Note: The GPS coordinates that we are using for Edgewood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Edgewood
      • Edgewood is located in Bell County
    • Yellow Creek
      (16 miles [25.7 km] to the east)
      • Note: The GPS coordinates that we are using for Yellow Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Yellow Creek
      • Yellow Creek is located in Bell County
    • Stony Fork Junction
      (17 miles [27.4 km] to the east)
      • Note: The GPS coordinates that we are using for Stony Fork Junction have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stony Fork Junction
      • Stony Fork Junction is located in Bell County
    • Middlesboro
      (19 miles [30.6 km] to the east)
    • Fourmile
      (19 miles [30.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Fourmile have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fourmile
      • Fourmile is located in Bell County
    • Pineville
      (20 miles [32.2 km] to the east)
  • Knox County
    • The following are listed by their distance from Packard, with the one closest to Packard listed first.
    • Wheeler
      (12 miles [19.3 km] to the east)
      • Jump to our Gazetteer entry for Wheeler
      • Wheeler is located in Knox County
    • Warren
      (13 miles [20.9 km] to the northeast)
      • Jump to our Gazetteer entry for Warren
      • Warren is located in Knox County
    • Trosper
      (15 miles [24.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Trosper have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Trosper
      • Trosper is located in Knox County
    • Artemus
      (16 miles [25.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Artemus have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Artemus
      • Artemus is located in Knox County
    • Barbourville
      (16 miles [25.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Barbourville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Barbourville
      • Barbourville is located in Knox County
      • Population from the 2020 Census: 2,974 people
      • Jump to TripAdvisor's Tourism page for Barbourville <2>
    • Heidrick
      (17 miles [27.4 km] to the northeast)
      • Jump to our Gazetteer entry for Heidrick
      • Heidrick is located in Knox County
    • Gray
      (19 miles [30.6 km] to the north)
    • Bimble
      (19 miles [30.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Bimble have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bimble
      • Bimble is located in Knox County
      • Jump to TripAdvisor's Tourism page for Bimble <2>
    • Flat Lick
      (19 miles [30.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Flat Lick have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Flat Lick
      • Flat Lick is located in Knox County
    • North Corbin
      (20 miles [32.2 km] to the north)
      • Note: The GPS coordinates that we are using for North Corbin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for North Corbin
      • North Corbin is located in Knox County
    • Cannon
      (20 miles [32.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Cannon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cannon
      • Cannon is located in Knox County
    • Hinkle
      (21 miles [33.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Hinkle have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hinkle
      • Hinkle is located in Knox County
  • Laurel County
    • The following are listed by their distance from Packard, with the one closest to Packard listed first.
    • Dorthae
      (22 miles [35.4 km] to the north)
      • Jump to our Gazetteer entry for Dorthae
      • Dorthae is located in Laurel County
    • Hopewell
      (22 miles [35.4 km] to the north)
      • Jump to our Gazetteer entry for Hopewell
      • Hopewell is located in Laurel County
    • Keavy
      (23 miles [37 km] to the north)
      • Jump to our Gazetteer entry for Keavy
      • Keavy is located in Laurel County
    • Lily
      (24 miles [38.6 km] to the north)
      • Jump to our Gazetteer entry for Lily
      • Lily is located in Laurel County
    • Sublimity City
      (29 miles [46.7 km] to the north)
      • Note: The GPS coordinates that we are using for Sublimity City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sublimity City
      • Sublimity City is located in Laurel County
  • McCreary County
    • The following are listed by their distance from Packard, with the one closest to Packard listed first.
    • Pine Knot
      (21 miles [33.8 km] to the west)
    • Strunk
      (21 miles [33.8 km] to the west)
      • Note: The GPS coordinates that we are using for Strunk have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Strunk
      • Strunk is located in McCreary County
    • Revelo
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for Revelo have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Revelo
      • Revelo is located in McCreary County
    • Stearns
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for Stearns have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stearns
      • Stearns is located in McCreary County
      • Jump to TripAdvisor's Tourism page for Stearns <2>
    • Whitley City
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for Whitley City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Whitley City
      • Whitley City is located in McCreary County
      • Jump to TripAdvisor's Tourism page for Whitley City <2>
    • Marshes Siding
      (24 miles [38.6 km] to the west)
      • Note: The GPS coordinates that we are using for Marshes Siding have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Marshes Siding
      • Marshes Siding is located in McCreary County
    • Smith Town
      (25 miles [40.2 km] to the west)
      • Note: The GPS coordinates that we are using for Smith Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Smith Town
      • Smith Town is located in McCreary County
    • Wiborg
      (25 miles [40.2 km] to the west)
      • Jump to our Gazetteer entry for Wiborg
      • Wiborg is located in McCreary County
    • Greenwood
      (28 miles [45.1 km] to the northwest)
      • Jump to our Gazetteer entry for Greenwood
      • Greenwood is located in McCreary County
  • Pulaski County
    • Mount Victory
      (30 miles [48.3 km] to the northwest)
      • Jump to our Gazetteer entry for Mount Victory
      • Mount Victory is located in Pulaski County
  • Campbell County (TN)
    • The following are listed by their distance from Packard, with the one closest to Packard listed first.
    • Jellico
      (6 miles [9.7 km] to the southwest)
      • Jump to our Gazetteer entry for Jellico
      • Jellico is located in Campbell County (TN)
      • Population from the 2020 Census: 2,132 people
      • Jump to TripAdvisor's Tourism page for Jellico <2>
    • Morley
      (7 miles [11.3 km] to the south)
      • Jump to our Gazetteer entry for Morley
      • Morley is located in Campbell County (TN)
    • White Oak
      (9 miles [14.5 km] to the south)
      • Jump to our Gazetteer entry for White Oak
      • White Oak is located in Campbell County (TN)
    • Habersham
      (11 miles [17.7 km] to the south)
      • Jump to our Gazetteer entry for Habersham
      • Habersham is located in Campbell County (TN)
    • Elk Valley
      (16 miles [25.7 km] to the southwest)
      • Jump to our Gazetteer entry for Elk Valley
      • Elk Valley is located in Campbell County (TN)
      • Estimated population in 2014: 565 people
    • Fincastle
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Fincastle have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fincastle
      • Fincastle is located in Campbell County (TN)
      • Population from the 2010 Census: 1,618 people
    • Flat Hollow
      (18 miles [29 km] to the south)
      • Jump to our Gazetteer entry for Flat Hollow
      • Flat Hollow is located in Campbell County (TN)
    • LaFollette
      (19 miles [30.6 km] to the south)
      • Jump to our Gazetteer entry for LaFollette
      • LaFollette is located in Campbell County (TN)
      • Population from the 2020 Census: 6,585 people
      • LaFollette has also been known as:
      • Big Creek Gap
      • Jump to TripAdvisor's Tourism page for LaFollette <2>
    • Stanfill
      (19 miles [30.6 km] to the southwest)
      • Jump to our Gazetteer entry for Stanfill
      • Stanfill is located in Campbell County (TN)
    • Demory
      (22 miles [35.4 km] to the south)
      • Jump to our Gazetteer entry for Demory
      • Demory is located in Campbell County (TN)
    • Jacksboro
      (24 miles [38.6 km] to the south)
      • Note: The GPS coordinates that we are using for Jacksboro have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jacksboro
      • Jacksboro is located in Campbell County (TN)
      • Population from the 2020 Census: 2,066 people
      • Jump to TripAdvisor's Tourism page for Jacksboro <2>
    • Caryville
      (25 miles [40.2 km] to the south)
      • Note: The GPS coordinates that we are using for Caryville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Caryville
      • Caryville is located in Campbell County (TN)
      • Population from the 2020 Census: 2,122 people
      • Jump to TripAdvisor's Tourism page for Caryville <2>
  • Claiborne County (TN)
    • The following are listed by their distance from Packard, with the one closest to Packard listed first.
    • Clairfield
      (9 miles [14.5 km] to the southeast)
      • Jump to our Gazetteer entry for Clairfield
      • Clairfield is located in Claiborne County (TN)
    • Hamlin Town
      (9 miles [14.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Hamlin Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hamlin Town
      • Hamlin Town is located in Claiborne County (TN)
    • Pruden
      (10 miles [16.1 km] to the southeast)
      • Jump to our Gazetteer entry for Pruden
      • Pruden is located in Claiborne County (TN)
    • Speedwell
      (17 miles [27.4 km] to the southeast)
    • Cumberland Gap
      (21 miles [33.8 km] to the east)
    • Minton Mill
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Minton Mill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Minton Mill
      • Minton Mill is located in Claiborne County (TN)
      • Estimated population in 2014: 527 people
    • Harrogate
      (23 miles [37 km] to the east)
      • Note: The GPS coordinates that we are using for Harrogate have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harrogate
      • Harrogate is located in Claiborne County (TN)
      • Population from the 2020 Census: 4,362 people
      • Jump to TripAdvisor's Tourism page for Harrogate <2>
    • Shawanee
      (23 miles [37 km] to the east)
      • Jump to our Gazetteer entry for Shawanee
      • Shawanee is located in Claiborne County (TN)
    • Goin
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Goin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Goin
      • Goin is located in Claiborne County (TN)
    • Big Barren
      (27 miles [43.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Big Barren have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Big Barren
      • Big Barren is located in Claiborne County (TN)
    • Sandlick
      (27 miles [43.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Sandlick have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sandlick
      • Sandlick is located in Claiborne County (TN)
    • Head of Barren
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Head of Barren have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Head of Barren
      • Head of Barren is located in Claiborne County (TN)
  • Scott County (TN)
    • The following are listed by their distance from Packard, with the one closest to Packard listed first.
    • Isham
      (21 miles [33.8 km] to the west)
      • Jump to our Gazetteer entry for Isham
      • Isham is located in Scott County (TN)
    • State Line
      (21 miles [33.8 km] to the west)
      • Jump to our Gazetteer entry for State Line
      • State Line is located in Scott County (TN)
    • Winfield
      (23 miles [37 km] to the west)
    • Straight Fork
      (26 miles [41.8 km] to the southwest)
      • Jump to our Gazetteer entry for Straight Fork
      • Straight Fork is located in Scott County (TN)
    • Oneida
      (27 miles [43.5 km] to the southwest)
      • Jump to our Gazetteer entry for Oneida
      • Oneida is located in Scott County (TN)
      • Population from the 2020 Census: 3,704 people
      • Jump to TripAdvisor's Tourism page for Oneida <2>
    • West Oneida
      (28 miles [45.1 km] to the southwest)
      • Jump to our Gazetteer entry for West Oneida
      • West Oneida is located in Scott County (TN)
    • Foster Crossroads
      (28 miles [45.1 km] to the west)
      • Jump to our Gazetteer entry for Foster Crossroads
      • Foster Crossroads is located in Scott County (TN)
    • Huntsville
      (29 miles [46.7 km] to the southwest)
    • Montgomery
      (29 miles [46.7 km] to the southwest)
      • Jump to our Gazetteer entry for Montgomery
      • Montgomery is located in Scott County (TN)
    • Norma
      (29 miles [46.7 km] to the southwest)
      • Jump to our Gazetteer entry for Norma
      • Norma is located in Scott County (TN)
      • Estimated population in 2014: 147 people
    • Verdun
      (29 miles [46.7 km] to the southwest)
      • Jump to our Gazetteer entry for Verdun
      • Verdun is located in Scott County (TN)
    • Winona
      (29 miles [46.7 km] to the southwest)
      • Jump to our Gazetteer entry for Winona
      • Winona is located in Scott County (TN)
  • Union County (TN)
    • The following are listed by their distance from Packard, with the one closest to Packard listed first.
    • Braden
      (19 miles [30.6 km] to the southeast)
      • Jump to our Gazetteer entry for Braden
      • Braden is located in Union County (TN)
      • Estimated population in 2014: 277 people
    • Loyston ‑ Historic
      (28 miles [45.1 km] to the south)
      • Note: The GPS coordinates that we are using for Loyston have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Loyston
      • Loyston is located in Union County (TN)
  • Lee County (VA)
    • Wheeler
      (27 miles [43.5 km] to the east)
      • Note: The GPS coordinates that we are using for Wheeler have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wheeler
      • Wheeler is located in Lee County (VA)

For an expanded list of the communities that are closest to Packard, see our County-by-County Page for Packard.

Newspapers Published in Packard ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 51 newspapers that have been published in the area around Packard.

Although we're unaware of any newspapers that were published in the immediate area of Packard, there are papers which were published within 20 miles [32.2 km]<3>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Packard.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first visit the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Packard:

Cemeteries Near Packard ...

Below are cemeteries that are in the vicinity of Packard.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Packard covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Packard, with the one closest to Packard listed first.

  • Powers Cemetery
    (2 miles [3.2 km] to the north)
    • Note: The GPS coordinates that we are using for the Powers Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Powers Cemetery
  • Stanfill - Oaklawn Cemetery
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for the Stanfill - Oaklawn Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Stanfill - Oaklawn Cemetery
  • Watson - Lawson Cemetery
    (4 miles [6.4 km] to the west)
  • Lawson Cemetery
    (4 miles [6.4 km] to the southeast)
  • Siler Cemetery
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Siler Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Siler Cemetery
  • Perkins Cemetery
    (5 miles [8 km] to the south)
  • Lawson Cemetery
    (5 miles [8 km] to the east)
  • McKiddy Cemetery
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for the McKiddy Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the McKiddy Cemetery
  • Sears Cemetery
    (5 miles [8 km] to the north)
    • Note: We haven't been able to verify our GPS coordinates for the Sears Cemetery. Although the coordinates have been estimated, they should be in the vicinity.<5>
    • To give a relative sense of its location, the Sears Cemetery is located 7 miles [11.3 km]<3> to the west of Williamsburg.
    • Jump to our Gazetteer entry for the Sears Cemetery
    • Jump to Find-A-Grave: FG ID #2515745 <4>
  • Rains Cemetery
    (5 miles [8 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Rains Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Rains Cemetery
  • Hyslope Cemetery
    (6 miles [9.7 km] to the southwest)
    • To give a relative sense of its location, the Hyslope Cemetery is located outside and to the east of Jellico (TN).
    • The Hyslope Cemetery has also been known as:
    • Gibson Cemetery
    • Jump to our Gazetteer entry for the Hyslope Cemetery
    • Jump to Find-A-Grave: FG ID #2269453 <4>
  • Huddleston Cemetery
    (6 miles [9.7 km] to the southwest)
  • Continue List   (791 more) ...
    • Bowlin Cemetery
      (6 miles [9.7 km] to the south)
    • Wheeler Cemetery
      (6 miles [9.7 km] to the south)
    • King Cemetery
      (6 miles [9.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for the King Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the King Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>

While we didn't find Packard in the Atlas, the following 1895 communities would have been found near the current location of Packard.

These communities are listed based on their distance from Packard, with the one closest to Packard listed first.

  • Saxton
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Saxton have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Saxton
    • Saxton is located in Whitley County
  • Lot
    (4 miles [6.4 km] to the south)
    • Jump to our Gazetteer entry for Lot
    • Lot is located in Whitley County
  • Pleasant View
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for Pleasant View have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pleasant View
    • Pleasant View is located in Whitley County
  • Red Ash
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Red Ash have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Red Ash
    • Red Ash is located in Whitley County
  • Carpenter
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Carpenter have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Carpenter
    • Carpenter is located in Whitley County
  • Jellico
    (6 miles [9.7 km] to the southwest)
    • Jump to our Gazetteer entry for Jellico
    • Jellico is located in Campbell County (TN)
    • Population from the 2020 Census: 2,132 people
    • Jump to TripAdvisor's Tourism page for Jellico <2>
  • Williamsburg
    (7 miles [11.3 km] to the northwest)
  • Newcomb
    (9 miles [14.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Newcomb have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Newcomb
    • Newcomb is located in Campbell County (TN)
  • Clairfield
    (9 miles [14.5 km] to the southeast)
    • Jump to our Gazetteer entry for Clairfield
    • Clairfield is located in Claiborne County (TN)
  • Rockholds
    (11 miles [17.7 km] to the north)
    • Jump to our Gazetteer entry for Rockholds
    • Rockholds is located in Whitley County
  • Pine Mountain ‑ Historic
    (14 miles [22.5 km] to the south)
    • Note: The GPS coordinates that we are using for Pine Mountain have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pine Mountain
    • Pine Mountain is located in Campbell County (TN)
  • Ingram
    (14 miles [22.5 km] to the east)
    • Note: The GPS coordinates that we are using for Ingram have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ingram
    • Ingram is located in Bell County
  • Continue List   (15 more) ...
    • Elk Valley
      (16 miles [25.7 km] to the southwest)
      • Jump to our Gazetteer entry for Elk Valley
      • Elk Valley is located in Campbell County (TN)
      • Estimated population in 2014: 565 people
    • Stockville ‑ Historic
      (16 miles [25.7 km] to the south)
      • Note: The GPS coordinates that we are using for Stockville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stockville
      • Stockville is located in Campbell County (TN)
    • Artemus
      (16 miles [25.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Artemus have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Artemus
      • Artemus is located in Knox County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Packard. See our List of 1890's Communities around Packard.

Unfortunately, we don't know of a website for Packard. If you can help, please contact us through our Feedback Page.

The official website for State of Kentucky: https://kentucky.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Packard) to Point B.Our distance measurements begin at a specific point in Packard. The point we use is located at these GPS coordinates - Latitude: 36.6671, Longitude: -84.0556       In this case, the coordinates for Packard have been provided by the Geographic Names Information System (GNIS).
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<6>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Packard, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024