Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Liberty (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Liberty. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most doctors and hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Liberty is located in Casey County and is the County Seat.
To see how the shape of Kentucky's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Casey County: Adair, Boyle, Lincoln, Marion, Pulaski, Russell & Taylor.
Below are the counties that are near Liberty. For each of these counties, we show a sample of those communities that are closest to Liberty:
- Casey County (The home county of Liberty)
- The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
- Cantown
(4 miles [6.4 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Cantown. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Cantown
- Cantown is located in Casey County
- Google driving directions:
- From your current location to Cantown
- From Liberty to Cantown
- Rubert Ford
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Rubert Ford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rubert Ford
- Rubert Ford is located in Casey County
- Gilpin
(5 miles [8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Gilpin. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Gilpin
- Gilpin is located in Casey County
- Google driving directions:
- From your current location to Gilpin
- From Liberty to Gilpin
- Yosemite
(6 miles [9.7 km] to the east)
- Middleburg
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Middleburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middleburg
- Middleburg is located in Casey County
- Labascus
(6 miles [9.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Labascus. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Labascus
- Labascus is located in Casey County
- Google driving directions:
- From your current location to Labascus
- From Liberty to Labascus
- Creston
(6 miles [9.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Creston. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Creston
- Creston is located in Casey County
- Google driving directions:
- From your current location to Creston
- From Liberty to Creston
- Evans Ford
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Evans Ford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Evans Ford
- Evans Ford is located in Casey County
- Rheber
(6 miles [9.7 km] to the southwest)
- Phil
(7 miles [11.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Phil. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Phil
- Phil is located in Casey County
- Google driving directions:
- From your current location to Phil
- From Liberty to Phil
- Evona
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Evona have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Evona
- Evona is located in Casey County
- Atterson
(8 miles [12.9 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Atterson. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Atterson
- Atterson is located in Casey County
- Google driving directions:
- From your current location to Atterson
- From Liberty to Atterson
- Argyle
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Argyle have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Argyle
- Argyle is located in Casey County
- Adair County
- The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
- Barnett Springs
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Barnett Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barnett Springs
- Barnett Springs is located in Adair County
- Pellyton
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Pellyton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pellyton
- Pellyton is located in Adair County
- Casey Creek
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Casey Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Casey Creek
- Casey Creek is located in Adair County
- Feathersburg
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Feathersburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Feathersburg
- Feathersburg is located in Adair County
- Eunice
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Eunice have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eunice
- Eunice is located in Adair County
- Neatsville
(13 miles [20.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Neatsville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Neatsville
- Neatsville is located in Adair County
- Google driving directions:
- From your current location to Neatsville
- From Liberty to Neatsville
- Speck
(13 miles [20.9 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Speck. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Speck
- Speck is located in Adair County
- Google driving directions:
- From your current location to Speck
- From Liberty to Speck
- Dunbar Hill
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Dunbar Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dunbar Hill
- Dunbar Hill is located in Adair County
- Knifley
(14 miles [22.5 km] to the west)
- Ella
(15 miles [24.1 km] to the southwest)
- Purdy
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Purdy have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Purdy
- Purdy is located in Adair County
- Sano
(17 miles [27.4 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Sano. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Sano
- Sano is located in Adair County
- Google driving directions:
- From your current location to Sano
- From Liberty to Sano
- Christine
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Christine have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Christine
- Christine is located in Adair County
- Boyle County
- The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
- Forkland
(16 miles [25.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Forkland. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Forkland
- Forkland is located in Boyle County
- Google driving directions:
- From your current location to Forkland
- From Liberty to Forkland
- Aliceton
(19 miles [30.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Aliceton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Aliceton
- Aliceton is located in Boyle County
- Google driving directions:
- From your current location to Aliceton
- From Liberty to Aliceton
- Alum Springs
(19 miles [30.6 km] to the north)
- Brumfield
(19 miles [30.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Brumfield. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Brumfield
- Brumfield is located in Boyle County
- Google driving directions:
- From your current location to Brumfield
- From Liberty to Brumfield
- Mitchellsburg
(19 miles [30.6 km] to the north)
- Parksville
(19 miles [30.6 km] to the north)
- Wilsonville
(19 miles [30.6 km] to the north)
- Junction City
(20 miles [32.2 km] to the north)
- Shelby City
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Shelby City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shelby City
- Shelby City is located in Boyle County
- Craintown
(21 miles [33.8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Craintown. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Craintown
- Craintown is located in Boyle County
- Google driving directions:
- From your current location to Craintown
- From Liberty to Craintown
- Perryville
(22 miles [35.4 km] to the north)
- Atoka
(23 miles [37 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Atoka. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Atoka
- Atoka is located in Boyle County
- Google driving directions:
- From your current location to Atoka
- From Liberty to Atoka
- Davis Hill
(23 miles [37 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Davis Hill. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Davis Hill
- Davis Hill is located in Boyle County
- Google driving directions:
- From your current location to Davis Hill
- From Liberty to Davis Hill
- Garrard County
- The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
- Lancaster
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Lancaster have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lancaster
- Lancaster is located in Garrard County
- Population from the 2020 Census: 3,840 people
- Jump to TripAdvisor's Tourism page for Lancaster <3>
- Hyattsville
(30 miles [48.3 km] to the northeast)
- Green County
- Roachville
(27 miles [43.5 km] to the west)
- Lincoln County
- The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
- Mount Salem
(10 miles [16.1 km] to the northeast)
- New Salem
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for New Salem have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Salem
- New Salem is located in Lincoln County
- Hustonville
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Hustonville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hustonville
- Hustonville is located in Lincoln County
- Population from the 2020 Census: 368 people
- Jump to TripAdvisor's Tourism page for Hustonville <3>
- South Fork
(12 miles [19.3 km] to the northeast)
- Geneva
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Geneva have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Geneva
- Geneva is located in Lincoln County
- McKinney
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for McKinney have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McKinney
- McKinney is located in Lincoln County
- Jump to TripAdvisor's Tourism page for McKinney <3>
- Kings Mountain
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Kings Mountain have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kings Mountain
- Kings Mountain is located in Lincoln County
- Waynesburg
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Waynesburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waynesburg
- Waynesburg is located in Lincoln County
- Chicken Bristle
(14 miles [22.5 km] to the northeast)
- Moreland
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Moreland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moreland
- Moreland is located in Lincoln County
- Milledgeville
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Milledgeville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milledgeville
- Milledgeville is located in Lincoln County
- Jumbo
(16 miles [25.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Jumbo. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Jumbo
- Jumbo is located in Lincoln County
- Google driving directions:
- From your current location to Jumbo
- From Liberty to Jumbo
- Turnersville
(16 miles [25.7 km] to the northeast)
- Marion County
- The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
- Bradfordsville
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Bradfordsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bradfordsville
- Bradfordsville is located in Marion County
- Population from the 2020 Census: 299 people
- Jump to TripAdvisor's Tourism page for Bradfordsville <3>
- Salleetown
(17 miles [27.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Salleetown. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Salleetown
- Salleetown is located in Marion County
- Google driving directions:
- From your current location to Salleetown
- From Liberty to Salleetown
- Riley
(18 miles [29 km] to the northwest)
- Gravel Switch
(19 miles [30.6 km] to the north)
- Greenbriar
(20 miles [32.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Greenbriar. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Greenbriar
- Greenbriar is located in Marion County
- Google driving directions:
- From your current location to Greenbriar
- From Liberty to Greenbriar
- Peck Ford
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Peck Ford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peck Ford
- Peck Ford is located in Marion County
- Penick
(20 miles [32.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Penick. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Penick
- Penick is located in Marion County
- Google driving directions:
- From your current location to Penick
- From Liberty to Penick
- Phillipsburg
(20 miles [32.2 km] to the northwest)
- Calvary
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Calvary have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calvary
- Calvary is located in Marion County
- Poplar Corner
(23 miles [37 km] to the northwest)
- Jessietown
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Jessietown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jessietown
- Jessietown is located in Marion County
- Lebanon
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Lebanon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lebanon
- Lebanon is located in Marion County
- Population from the 2020 Census: 5,733 people
- Jump to TripAdvisor's Tourism page for Lebanon <3>
- New Market
(24 miles [38.6 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for New Market. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for New Market
- New Market is located in Marion County
- Google driving directions:
- From your current location to New Market
- From Liberty to New Market
- Mercer County
- The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
- Dixville
(26 miles [41.8 km] to the north)
- Nevada
(26 miles [41.8 km] to the north)
- Stewart
(26 miles [41.8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Stewart. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Stewart
- Stewart is located in Mercer County
- Google driving directions:
- From your current location to Stewart
- From Liberty to Stewart
- Montgomery County
- Hedgeville
(25 miles [40.2 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Hedgeville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Hedgeville
- Hedgeville is located in Montgomery County
- Hedgeville has also been known as:
- Hedges
- Google driving directions:
- From your current location to Hedgeville
- From Liberty to Hedgeville
- Pulaski County
- The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
- Eubank
(15 miles [24.1 km] to the east)
- Ansel
(15 miles [24.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Ansel. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Ansel
- Ansel is located in Pulaski County
- Google driving directions:
- From your current location to Ansel
- From Liberty to Ansel
- Faubush
(18 miles [29 km] to the south)
- Nancy
(19 miles [30.6 km] to the southeast)
- Science Hill
(19 miles [30.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Science Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Science Hill
- Science Hill is located in Pulaski County
- Population from the 2020 Census: 693 people
- Jump to TripAdvisor's Tourism page for Science Hill <3>
- Vinnie
(21 miles [33.8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Vinnie. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Vinnie
- Vinnie is located in Pulaski County
- Google driving directions:
- From your current location to Vinnie
- From Liberty to Vinnie
- Bee Lick
(23 miles [37 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Bee Lick. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Bee Lick
- Bee Lick is located in Pulaski County
- Google driving directions:
- From your current location to Bee Lick
- From Liberty to Bee Lick
- Woodstock
(23 miles [37 km] to the east)
- Dabney
(23 miles [37 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Dabney. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Dabney
- Dabney is located in Pulaski County
- Google driving directions:
- From your current location to Dabney
- From Liberty to Dabney
- Somerset
(24 miles [38.6 km] to the southeast)
- Coin
(25 miles [40.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Coin. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Coin
- Coin is located in Pulaski County
- Google driving directions:
- From your current location to Coin
- From Liberty to Coin
- Ferguson
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Ferguson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ferguson
- Ferguson is located in Pulaski County
- Population from the 2020 Census: 943 people
- Grundy
(26 miles [41.8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Grundy. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Grundy
- Grundy is located in Pulaski County
- Google driving directions:
- From your current location to Grundy
- From Liberty to Grundy
- Rockcastle County
- The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
- Ottawa
(26 miles [41.8 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Ottawa. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Ottawa
- Ottawa is located in Rockcastle County
- Google driving directions:
- From your current location to Ottawa
- From Liberty to Ottawa
- Gum Sulphur
(27 miles [43.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Gum Sulphur. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Gum Sulphur
- Gum Sulphur is located in Rockcastle County
- Google driving directions:
- From your current location to Gum Sulphur
- From Liberty to Gum Sulphur
- Brodhead
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Brodhead have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brodhead
- Brodhead is located in Rockcastle County
- Population from the 2020 Census: 1,185 people
- Jump to TripAdvisor's Tourism page for Brodhead <3>
- Russell County
- The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
- Salem
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Salem have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Salem
- Salem is located in Russell County
- Russell Springs
(19 miles [30.6 km] to the southwest)
- Middletown
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Middletown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middletown
- Middletown is located in Russell County
- Esto
(23 miles [37 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Esto. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Esto
- Esto is located in Russell County
- Google driving directions:
- From your current location to Esto
- From Liberty to Esto
- Jamestown
(24 miles [38.6 km] to the south)
- Stokes ‑ Historic
(27 miles [43.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Stokes. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Stokes
- Stokes is located in Russell County
- Google driving directions:
- From your current location to Stokes
- From Liberty to Stokes
- Freedom
(28 miles [45.1 km] to the south)
- Lula ‑ Historic
(29 miles [46.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Lula. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Lula
- Lula is located in Russell County
- Google driving directions:
- From your current location to Lula
- From Liberty to Lula
- Taylor County
- The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
- Mannsville
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Mannsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mannsville
- Mannsville is located in Taylor County
- Acton
(17 miles [27.4 km] to the west)
- Elk Horn
(19 miles [30.6 km] to the west)
- Campbellsville
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Campbellsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Campbellsville
- Campbellsville is located in Taylor County
- Population from the 2020 Census: 11,430 people
- Jump to TripAdvisor's Tourism page for Campbellsville <3>
- Saloma
(25 miles [40.2 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Saloma. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Saloma
- Saloma is located in Taylor County
- Google driving directions:
- From your current location to Saloma
- From Liberty to Saloma
- Wright's
(25 miles [40.2 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Wright's. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Wright's
- Wright's is located in Taylor County
- Google driving directions:
- From your current location to Wright's
- From Liberty to Wright's
- Bengal
(28 miles [45.1 km] to the west)
- Washington County
- The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
- Jenkinsville
(29 miles [46.7 km] to the north)
- Mackville
(29 miles [46.7 km] to the north)
- Springfield
(29 miles [46.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Springfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springfield
- Springfield is located in Washington County
- Population from the 2020 Census: 2,987 people
- Jump to TripAdvisor's Tourism page for Springfield <3>
- Thompsonville
(30 miles [48.3 km] to the north)
- Wayne County
- The following are listed by their distance from Liberty, with the one closest to Liberty listed first.
- Mill Springs
(27 miles [43.5 km] to the south)
- Rankin
(28 miles [45.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Rankin. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Rankin
- Rankin is located in Wayne County
- Google driving directions:
- From your current location to Rankin
- From Liberty to Rankin
- Frazer
(28 miles [45.1 km] to the southeast)
For an expanded list of the communities that are closest to Liberty, see our County-by-County Page for Liberty.
Cemeteries Near Liberty ...
Below are cemeteries that are in the vicinity of Liberty.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Liberty covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Liberty, with the one closest to Liberty listed first.
- Glenwood Cemetery
(Less than 2 miles to the northeast)
- Jump to our Gazetteer entry for the Glenwood Cemetery
- Note: The GPS coordinates that we are using for the Glenwood Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Walnut Hill Cemetery
(2 miles [3.2 km] to the southwest)
- Jump to our Gazetteer entry for the Walnut Hill Cemetery
- Note: The GPS coordinates that we are using for the Walnut Hill Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Mason Creek Cemetery
(2 miles [3.2 km] to the south)
- Jump to our Gazetteer entry for the Mason Creek Cemetery
- Note: The GPS coordinates that we are using for the Mason Creek Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Brush Creek Cemetery
(2 miles [3.2 km] to the northwest)
- Jump to our Gazetteer entry for the Brush Creek Cemetery
- Note: The GPS coordinates that we are using for the Brush Creek Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Poplar Springs Cemetery
(3 miles [4.8 km] to the southeast)
- Jump to our Gazetteer entry for the Poplar Springs Cemetery
- Note: The GPS coordinates that we are using for the Poplar Springs Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Poplar Grove Cemetery
(3 miles [4.8 km] to the north)
- Jump to our Gazetteer entry for the Poplar Grove Cemetery
- Note: The GPS coordinates that we are using for the Poplar Grove Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Shady Grove Separate Baptist Church Cemetery
(4 miles [6.4 km] to the west)
- Murphy Family Cemetery
(4 miles [6.4 km] to the south)
- Jump to our Gazetteer entry for the Murphy Family Cemetery
- Note: The GPS coordinates that we are using for the Murphy Family Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Contown Cemetery
(4 miles [6.4 km] to the south)
- Jump to our Gazetteer entry for the Contown Cemetery
- Note: The GPS coordinates that we are using for the Contown Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Trace Fork Cemetery
(4 miles [6.4 km] to the southeast)
- Jump to our Gazetteer entry for the Trace Fork Cemetery
- Note: The GPS coordinates that we are using for the Trace Fork Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Wilson Cemetery
(4 miles [6.4 km] to the northwest)
- Jump to our Gazetteer entry for the Wilson Cemetery
- Note: The GPS coordinates that we are using for the Wilson Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Caney Fork Cemetery
(4 miles [6.4 km] to the northwest)
- Continue List (448 more) ...
- Whited Cemetery
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for the Whited Cemetery
- Note: The GPS coordinates that we are using for the Whited Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Mt. Pleasant Cemetery
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for the Mt. Pleasant Cemetery
- Note: The GPS coordinates that we are using for the Mt. Pleasant Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Salem Church Cemetery
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for the Salem Church Cemetery
- Note: The GPS coordinates that we are using for the Salem Church Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>
The Rand McNally Atlas shows that Liberty had a population of 136 people in 1895 with a post office and no railroad service. In 2020, Liberty had a population of 2,139 people.
These communities are listed based on their distance from Liberty, with the one closest to Liberty listed first.
- Gilpin
(5 miles [8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Gilpin. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Gilpin
- Gilpin is located in Casey County
- Google driving directions:
- From your current location to Gilpin
- From Liberty to Gilpin
- Labascus
(6 miles [9.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Labascus. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Labascus
- Labascus is located in Casey County
- Google driving directions:
- From your current location to Labascus
- From Liberty to Labascus
- Yosemite
(6 miles [9.7 km] to the east)
- Middleburg
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Middleburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middleburg
- Middleburg is located in Casey County
- Phil
(7 miles [11.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Phil. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Phil
- Phil is located in Casey County
- Google driving directions:
- From your current location to Phil
- From Liberty to Phil
- Clementsville
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Clementsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clementsville
- Clementsville is located in Casey County
- Evona
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Evona have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Evona
- Evona is located in Casey County
- Atterson
(8 miles [12.9 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Atterson. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Atterson
- Atterson is located in Casey County
- Google driving directions:
- From your current location to Atterson
- From Liberty to Atterson
- Dunnville
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Dunnville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dunnville
- Dunnville is located in Casey County
- Pellyton
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Pellyton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pellyton
- Pellyton is located in Adair County
- Mount Salem
(10 miles [16.1 km] to the northeast)
- Ellisburg
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Ellisburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ellisburg
- Ellisburg is located in Casey County
- Continue List (18 more) ...
- Mintonville
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Mintonville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mintonville
- Mintonville is located in Casey County
- Bethelridge
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Bethelridge have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bethelridge
- Bethelridge is located in Casey County
- Duncan
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Duncan have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Duncan
- Duncan is located in Casey County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Liberty. See our List of 1890's Communities around Liberty.
Newspapers Published in the Vicinity of Liberty ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 26 newspapers that have been published in the area around Liberty.
We have organized these newspapers into two lists:
- A Local Newspaper List - focusing on the papers published in the immediate area of Liberty. There are actually two parts to this list - papers printed in the immediate area of Liberty and those printed in the larger area surrounding Liberty.
- An Extended Newspaper List - a longer list, sorted by paper name and containing those papers published within 22 miles [35.4 km]<6> of Liberty.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Liberty:
- Websites specific to Kentucky
- Pages specific to Casey County
- Genealogy information for nearby counties
- Adair County
- Boyle County
- Garrard County
- Green County
- Lincoln County
- Marion County
- Mercer County
- Montgomery County
- Pulaski County
- Rockcastle County
- Russell County
- Taylor County
- Washington County
- Wayne County
- Cemetery Information and Directories for Kentucky
Off-the-Road Links ...
Unfortunately, we don't know of a website for Liberty. If you can help, please contact us through our Feedback Page.
The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<5> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Liberty, please let us know so that we can improve our accuracy. |
<6> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Liberty) to Point B.Our distance measurements begin at a specific point in Liberty. The point we use is located at these GPS coordinates - Latitude: 37.3185, Longitude: -84.9361 |