RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Kentucky >> Lincoln County >> Hubble >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Kentucky

The Commemorative Quarter for Kentucky





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Hubble (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Hubble. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Hubble is located in Lincoln County.

To see how the shape of Kentucky's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Lincoln County: Boyle, Casey, Garrard, Pulaski & Rockcastle.

Below are the counties that are near Hubble. For each of these counties, we show a sample of those communities that are closest to Hubble:

  • Lincoln County     (The home county of Hubble)
    • The following are listed by their distance from Hubble, with the one closest to Hubble listed first.
    • Logantown
      (2 miles [3.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Logantown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Logantown
      • Logantown is located in Lincoln County
    • Gilbert
      (3 miles [4.8 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Gilbert. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Gilbert
      • Gilbert is located in Lincoln County
    • Stanford
      (4 miles [6.4 km] to the south)
    • Rowland
      (5 miles [8 km] to the south)
      • Jump to our Gazetteer entry for Rowland
      • Rowland is located in Lincoln County
    • Boneyville
      (6 miles [9.7 km] to the south)
      • Note: The GPS coordinates that we are using for Boneyville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Boneyville
      • Boneyville is located in Lincoln County
    • Blue Lick
      (8 miles [12.9 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Blue Lick. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Blue Lick
      • Blue Lick is located in Lincoln County
    • Maywood
      (8 miles [12.9 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Maywood. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Maywood
      • Maywood is located in Lincoln County
    • Preachersville
      (8 miles [12.9 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Preachersville. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Preachersville
      • Preachersville is located in Lincoln County
    • Turnersville
      (8 miles [12.9 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Turnersville. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Turnersville
      • Turnersville is located in Lincoln County
    • Halls Gap
      (9 miles [14.5 km] to the south)
      • Note: The GPS coordinates that we are using for Halls Gap have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Halls Gap
      • Halls Gap is located in Lincoln County
    • Jumbo
      (9 miles [14.5 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Jumbo. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Jumbo
      • Jumbo is located in Lincoln County
    • Miracle
      (9 miles [14.5 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Miracle. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Miracle
      • Miracle is located in Lincoln County
    • Chicken Bristle
      (10 miles [16.1 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Chicken Bristle. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Chicken Bristle
      • Chicken Bristle is located in Lincoln County
  • Anderson County
    • McBrayer
      (28 miles [45.1 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for McBrayer. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for McBrayer
      • McBrayer is located in Anderson County
  • Boyle County
    • The following are listed by their distance from Hubble, with the one closest to Hubble listed first.
    • Hedgeville
      (2 miles [3.2 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Hedgeville. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Hedgeville
      • Hedgeville is located in Boyle County
    • Clifton
      (4 miles [6.4 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Clifton. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Clifton
      • Clifton is located in Boyle County
    • Little Needmore
      (6 miles [9.7 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Little Needmore. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Little Needmore
      • Little Needmore is located in Boyle County
    • Shelby City
      (6 miles [9.7 km] to the west)
      • Note: The GPS coordinates that we are using for Shelby City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shelby City
      • Shelby City is located in Boyle County
    • Danville
      (7 miles [11.3 km] to the northwest)
    • Junction City
      (7 miles [11.3 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Junction City. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Junction City
      • Junction City is located in Boyle County
      • Population from the 2020 Census: 2,338 people
      • Jump to TripAdvisor's Tourism page for Junction City <3>
    • West Danville
      (8 miles [12.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for West Danville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West Danville
      • West Danville is located in Boyle County
    • Faulconer
      (10 miles [16.1 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Faulconer. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Faulconer
      • Faulconer is located in Boyle County
    • Alum Springs
      (10 miles [16.1 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Alum Springs. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Alum Springs
      • Alum Springs is located in Boyle County
    • Davis Hill
      (10 miles [16.1 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Davis Hill. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Davis Hill
      • Davis Hill is located in Boyle County
    • Atoka
      (11 miles [17.7 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Atoka. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Atoka
      • Atoka is located in Boyle County
    • Needmore
      (12 miles [19.3 km] to the west)
      • Note: The GPS coordinates that we are using for Needmore have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Needmore
      • Needmore is located in Boyle County
    • Wilsonville
      (12 miles [19.3 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Wilsonville. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Wilsonville
      • Wilsonville is located in Boyle County
  • Casey County
    • The following are listed by their distance from Hubble, with the one closest to Hubble listed first.
    • Butchertown
      (14 miles [22.5 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Butchertown. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Butchertown
      • Butchertown is located in Casey County
    • Middleburg
      (18 miles [29 km] to the southwest)
      • Note: The GPS coordinates that we are using for Middleburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Middleburg
      • Middleburg is located in Casey County
    • Yosemite
      (19 miles [30.6 km] to the southwest)
    • Liberty
      (24 miles [38.6 km] to the southwest)
    • Bethelridge
      (25 miles [40.2 km] to the south)
      • Note: The GPS coordinates that we are using for Bethelridge have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bethelridge
      • Bethelridge is located in Casey County
    • Argyle
      (26 miles [41.8 km] to the south)
      • Note: The GPS coordinates that we are using for Argyle have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Argyle
      • Argyle is located in Casey County
    • Gilpin
      (26 miles [41.8 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Gilpin. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Gilpin
      • Gilpin is located in Casey County
    • Ware
      (27 miles [43.5 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Ware. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Ware
      • Ware is located in Casey County
    • Cantown
      (27 miles [43.5 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Cantown. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Cantown
      • Cantown is located in Casey County
    • Atterson
      (29 miles [46.7 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Atterson. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Atterson
      • Atterson is located in Casey County
    • Labascus
      (29 miles [46.7 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Labascus. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Labascus
      • Labascus is located in Casey County
    • Mintonville
      (30 miles [48.3 km] to the south)
      • Note: The GPS coordinates that we are using for Mintonville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mintonville
      • Mintonville is located in Casey County
    • Rheber
      (30 miles [48.3 km] to the southwest)
      • Jump to our Gazetteer entry for Rheber
      • Rheber is located in Casey County
  • Clark County
    • The following are listed by their distance from Hubble, with the one closest to Hubble listed first.
    • Boonesboro
      (29 miles [46.7 km] to the northeast)
      • Jump to our Gazetteer entry for Boonesboro
      • Boonesboro is located in Clark County
    • Ford
      (29 miles [46.7 km] to the northeast)
      • Jump to our Gazetteer entry for Ford
      • Ford is located in Clark County
  • Fayette County
    • The following are listed by their distance from Hubble, with the one closest to Hubble listed first.
    • Spears
      (22 miles [35.4 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Spears. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Spears
      • Spears is located in Fayette County
    • Athens
      (29 miles [46.7 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Athens. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Athens
      • Athens is located in Fayette County
  • Garrard County
    • The following are listed by their distance from Hubble, with the one closest to Hubble listed first.
    • Lancaster
      (4 miles [6.4 km] to the east)
      • Note: The GPS coordinates that we are using for Lancaster have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lancaster
      • Lancaster is located in Garrard County
      • Population from the 2020 Census: 3,840 people
      • Jump to TripAdvisor's Tourism page for Lancaster <3>
    • Hyattsville
      (7 miles [11.3 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Hyattsville. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Hyattsville
      • Hyattsville is located in Garrard County
    • Bryantsville
      (8 miles [12.9 km] to the north)
      • Note: The GPS coordinates that we are using for Bryantsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bryantsville
      • Bryantsville is located in Garrard County
      • Jump to TripAdvisor's Tourism page for Bryantsville <3>
    • Stone
      (10 miles [16.1 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Stone. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Stone
      • Stone is located in Garrard County
    • Nina
      (11 miles [17.7 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Nina. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Nina
      • Nina is located in Garrard County
    • Lowell
      (12 miles [19.3 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Lowell. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Lowell
      • Lowell is located in Garrard County
    • Paint Lick
      (13 miles [20.9 km] to the east)
    • Cartersville
      (14 miles [22.5 km] to the east)
      • Jump to our Gazetteer entry for Cartersville
      • Cartersville is located in Garrard County
  • Harlan County
    • Rutherford
      (15 miles [24.1 km] to the northeast)
      • Jump to our Gazetteer entry for Rutherford
      • Rutherford is located in Harlan County
  • Jackson County
    • Kerby Knob
      (30 miles [48.3 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Kerby Knob. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Kerby Knob
      • Kerby Knob is located in Jackson County
  • Jessamine County
    • The following are listed by their distance from Hubble, with the one closest to Hubble listed first.
    • Hall
      (13 miles [20.9 km] to the north)
      • Jump to our Gazetteer entry for Hall
      • Hall is located in Jessamine County
    • Little Hickman
      (13 miles [20.9 km] to the north)
      • Jump to our Gazetteer entry for Little Hickman
      • Little Hickman is located in Jessamine County
    • Hanly
      (16 miles [25.7 km] to the north)
      • Jump to our Gazetteer entry for Hanly
      • Hanly is located in Jessamine County
    • High Bridge
      (16 miles [25.7 km] to the north)
      • Jump to our Gazetteer entry for High Bridge
      • High Bridge is located in Jessamine County
    • Pollard
      (16 miles [25.7 km] to the northeast)
      • Jump to our Gazetteer entry for Pollard
      • Pollard is located in Jessamine County
    • Vineyard
      (17 miles [27.4 km] to the north)
      • Jump to our Gazetteer entry for Vineyard
      • Vineyard is located in Jessamine County
    • Mount Lebanon
      (17 miles [27.4 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Mount Lebanon. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Mount Lebanon
      • Mount Lebanon is located in Jessamine County
    • Wilmore
      (18 miles [29 km] to the north)
    • Jessamine
      (19 miles [30.6 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Jessamine. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Jessamine
      • Jessamine is located in Jessamine County
    • Nicholasville
      (20 miles [32.2 km] to the north)
    • Logana
      (20 miles [32.2 km] to the northeast)
      • Jump to our Gazetteer entry for Logana
      • Logana is located in Jessamine County
    • Troy
      (21 miles [33.8 km] to the north)
      • Jump to our Gazetteer entry for Troy
      • Troy is located in Jessamine County
    • Catnip ‑ Historic
      (23 miles [37 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Catnip. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Catnip
      • Catnip is located in Jessamine County
  • Madison County
    • The following are listed by their distance from Hubble, with the one closest to Hubble listed first.
    • Kirksville
      (14 miles [22.5 km] to the east)
      • Note: The GPS coordinates that we are using for Kirksville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kirksville
      • Kirksville is located in Madison County
    • Cottonburg
      (14 miles [22.5 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Cottonburg. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Cottonburg
      • Cottonburg is located in Madison County
    • Edenton
      (14 miles [22.5 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Edenton. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Edenton
      • Edenton is located in Madison County
    • Round Hill
      (14 miles [22.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Round Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Round Hill
      • Round Hill is located in Madison County
    • Buggytown
      (15 miles [24.1 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Buggytown. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Buggytown
      • Buggytown is located in Madison County
    • Happy Landing
      (15 miles [24.1 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Happy Landing. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Happy Landing
      • Happy Landing is located in Madison County
    • Ruthton
      (15 miles [24.1 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Ruthton. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Ruthton
      • Ruthton is located in Madison County
    • Silver Creek
      (16 miles [25.7 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Silver Creek. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Silver Creek
      • Silver Creek is located in Madison County
    • Wallaceton
      (16 miles [25.7 km] to the east)
      • Note: The GPS coordinates that we are using for Wallaceton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wallaceton
      • Wallaceton is located in Madison County
    • Duncanon
      (17 miles [27.4 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Duncanon. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Duncanon
      • Duncanon is located in Madison County
    • Newby
      (17 miles [27.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Newby have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Newby
      • Newby is located in Madison County
    • Caleast
      (18 miles [29 km] to the east)
      • Note: The GPS coordinates that we are using for Caleast have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Caleast
      • Caleast is located in Madison County
    • Baldwin
      (18 miles [29 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Baldwin. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Baldwin
      • Baldwin is located in Madison County
  • Marion County
    • The following are listed by their distance from Hubble, with the one closest to Hubble listed first.
    • Gravel Switch
      (21 miles [33.8 km] to the west)
      • Jump to our Gazetteer entry for Gravel Switch
      • Gravel Switch is located in Marion County
    • Riley
      (24 miles [38.6 km] to the west)
      • Jump to our Gazetteer entry for Riley
      • Riley is located in Marion County
    • Bradfordsville
      (27 miles [43.5 km] to the west)
      • Note: The GPS coordinates that we are using for Bradfordsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bradfordsville
      • Bradfordsville is located in Marion County
      • Population from the 2020 Census: 299 people
      • Jump to TripAdvisor's Tourism page for Bradfordsville <3>
    • Penick
      (27 miles [43.5 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Penick. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Penick
      • Penick is located in Marion County
    • Poplar Corner
      (27 miles [43.5 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Poplar Corner. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Poplar Corner
      • Poplar Corner is located in Marion County
    • Simstown
      (28 miles [45.1 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Simstown. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Simstown
      • Simstown is located in Marion County
  • Mercer County
    • The following are listed by their distance from Hubble, with the one closest to Hubble listed first.
    • Burgin
      (12 miles [19.3 km] to the northwest)
    • Harrodsburg
      (15 miles [24.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Harrodsburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harrodsburg
      • Harrodsburg is located in Mercer County
      • Population from the 2020 Census: 8,544 people
      • Jump to TripAdvisor's Tourism page for Harrodsburg <3>
    • Nevada
      (15 miles [24.1 km] to the northwest)
      • Jump to our Gazetteer entry for Nevada
      • Nevada is located in Mercer County
    • Dixville
      (17 miles [27.4 km] to the northwest)
      • Jump to our Gazetteer entry for Dixville
      • Dixville is located in Mercer County
    • Braxton
      (18 miles [29 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Braxton. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Braxton
      • Braxton is located in Mercer County
    • Jackson
      (19 miles [30.6 km] to the northwest)
      • Note: The GPS coordinates that we are using for Jackson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jackson
      • Jackson is located in Mercer County
    • McAfee
      (20 miles [32.2 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for McAfee. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for McAfee
      • McAfee is located in Mercer County
    • Stewart
      (20 miles [32.2 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Stewart. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Stewart
      • Stewart is located in Mercer County
    • Vanarsdell
      (23 miles [37 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Vanarsdell. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Vanarsdell
      • Vanarsdell is located in Mercer County
    • Mayo
      (24 miles [38.6 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Mayo. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Mayo
      • Mayo is located in Mercer County
    • Salvisa
      (24 miles [38.6 km] to the northwest)
    • Duncan
      (25 miles [40.2 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Duncan. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Duncan
      • Duncan is located in Mercer County
    • Tablow
      (26 miles [41.8 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Tablow. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Tablow
      • Tablow is located in Mercer County
  • Montgomery County
    • Hedgeville
      (2 miles [3.2 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Hedgeville. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Hedgeville
      • Hedgeville is located in Montgomery County
      • Hedgeville has also been known as:
      • Hedges
  • Pulaski County
    • The following are listed by their distance from Hubble, with the one closest to Hubble listed first.
    • Bee Lick
      (20 miles [32.2 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Bee Lick. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Bee Lick
      • Bee Lick is located in Pulaski County
    • Eubank
      (22 miles [35.4 km] to the south)
    • Woodstock
      (24 miles [38.6 km] to the south)
      • Jump to our Gazetteer entry for Woodstock
      • Woodstock is located in Pulaski County
    • Walnut Grove
      (25 miles [40.2 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Walnut Grove. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Walnut Grove
      • Walnut Grove is located in Pulaski County
    • Ansel
      (27 miles [43.5 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Ansel. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Ansel
      • Ansel is located in Pulaski County
    • Dabney
      (29 miles [46.7 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Dabney. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Dabney
      • Dabney is located in Pulaski County
    • Science Hill
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for Science Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Science Hill
      • Science Hill is located in Pulaski County
      • Population from the 2020 Census: 693 people
      • Jump to TripAdvisor's Tourism page for Science Hill <3>
    • Coin
      (30 miles [48.3 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Coin. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Coin
      • Coin is located in Pulaski County
  • Rockcastle County
    • The following are listed by their distance from Hubble, with the one closest to Hubble listed first.
    • Gum Sulphur
      (15 miles [24.1 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Gum Sulphur. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Gum Sulphur
      • Gum Sulphur is located in Rockcastle County
    • Brodhead
      (18 miles [29 km] to the southeast)
      • Note: The GPS coordinates that we are using for Brodhead have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Brodhead
      • Brodhead is located in Rockcastle County
      • Population from the 2020 Census: 1,185 people
      • Jump to TripAdvisor's Tourism page for Brodhead <3>
    • Conway
      (19 miles [30.6 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Conway. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Conway
      • Conway is located in Rockcastle County
    • Ottawa
      (19 miles [30.6 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Ottawa. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Ottawa
      • Ottawa is located in Rockcastle County
    • Renfro Valley
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Renfro Valley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Renfro Valley
      • Renfro Valley is located in Rockcastle County
      • Jump to TripAdvisor's Tourism page for Renfro Valley <3>
    • Wildie
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Wildie have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wildie
      • Wildie is located in Rockcastle County
    • Disputanta
      (23 miles [37 km] to the east)
      • Jump to our Gazetteer entry for Disputanta
      • Disputanta is located in Rockcastle County
    • Mount Vernon
      (24 miles [38.6 km] to the southeast)
    • Climax
      (25 miles [40.2 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Climax. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Climax
      • Climax is located in Rockcastle County
    • Orlando
      (26 miles [41.8 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Orlando. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Orlando
      • Orlando is located in Rockcastle County
    • Hansford
      (27 miles [43.5 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Hansford. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Hansford
      • Hansford is located in Rockcastle County
    • Mullins
      (29 miles [46.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Mullins have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mullins
      • Mullins is located in Rockcastle County
  • Washington County
    • The following are listed by their distance from Hubble, with the one closest to Hubble listed first.
    • Jenkinsville
      (23 miles [37 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Jenkinsville. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Jenkinsville
      • Jenkinsville is located in Washington County
    • Mackville
      (24 miles [38.6 km] to the northwest)
      • Jump to our Gazetteer entry for Mackville
      • Mackville is located in Washington County
      • Population from the 2020 Census: 224 people
    • Thompsonville
      (27 miles [43.5 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Thompsonville. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Thompsonville
      • Thompsonville is located in Washington County
    • Seaville
      (28 miles [45.1 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Seaville. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Seaville
      • Seaville is located in Washington County
    • Sharpsville
      (28 miles [45.1 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Sharpsville. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Sharpsville
      • Sharpsville is located in Washington County
    • Willisburg
      (29 miles [46.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Willisburg have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Willisburg
      • Willisburg is located in Washington County
      • Population from the 2020 Census: 282 people
      • Jump to TripAdvisor's Tourism page for Willisburg <3>
  • Woodford County
    • The following are listed by their distance from Hubble, with the one closest to Hubble listed first.
    • Mundys Landing
      (18 miles [29 km] to the north)
      • Note: The GPS coordinates that we are using for Mundys Landing have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mundys Landing
      • Mundys Landing is located in Woodford County
    • Nonesuch
      (22 miles [35.4 km] to the north)
      • Note: The GPS coordinates that we are using for Nonesuch have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nonesuch
      • Nonesuch is located in Woodford County
    • Mortonsville
      (26 miles [41.8 km] to the north)
      • Note: The GPS coordinates that we are using for Mortonsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mortonsville
      • Mortonsville is located in Woodford County
    • Pinckard
      (26 miles [41.8 km] to the north)
      • Note: The GPS coordinates that we are using for Pinckard have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pinckard
      • Pinckard is located in Woodford County
    • Gaybourn
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Gaybourn have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gaybourn
      • Gaybourn is located in Woodford County
    • Hunter Town
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Hunter Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hunter Town
      • Hunter Town is located in Woodford County
    • Woodford Village
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Woodford Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Woodford Village
      • Woodford Village is located in Woodford County

For an expanded list of the communities that are closest to Hubble, see our County-by-County Page for Hubble.

Cemeteries Near Hubble ...

Below are cemeteries that are in the vicinity of Hubble.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Hubble covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Hubble, with the one closest to Hubble listed first.

  • Green Hill Cemetery
    (Less than 2 miles to the southwest)
    • Jump to our Gazetteer entry for the Green Hill Cemetery
    • Note: The GPS coordinates that we are using for the Green Hill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Sutton Cemetery
    (Less than 2 miles to the southwest)
    • Jump to our Gazetteer entry for the Sutton Cemetery
    • Note: The GPS coordinates that we are using for the Sutton Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Blackerby Cemetery
    (Less than 2 miles to the northwest)
    • Jump to our Gazetteer entry for the Blackerby Cemetery
    • Note: The GPS coordinates that we are using for the Blackerby Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Ashlock Cemetery
    (2 miles [3.2 km] to the southeast)
    • Jump to our Gazetteer entry for the Ashlock Cemetery
    • Note: The GPS coordinates that we are using for the Ashlock Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Barrows Cemetery
    (3 miles [4.8 km] to the south)
    • Jump to our Gazetteer entry for the Barrows Cemetery
    • Note: The GPS coordinates that we are using for the Barrows Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Lancaster African American Cemetery
    (3 miles [4.8 km] to the east)
  • Buffalo Springs Cemetery
    (4 miles [6.4 km] to the south)
  • Goshen Cemetery
    (4 miles [6.4 km] to the southeast)
    • Jump to our Gazetteer entry for the Goshen Cemetery
    • Note: The GPS coordinates that we are using for the Goshen Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Lancaster Cemetery
    (4 miles [6.4 km] to the east)
  • Danville Memorial Gardens
    (4 miles [6.4 km] to the west)
  • Givans Cemetery
    (6 miles [9.7 km] to the west)
    • Jump to our Gazetteer entry for the Givans Cemetery
    • Note: The GPS coordinates that we are using for the Givans Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • McCormack Cemetery
    (6 miles [9.7 km] to the southwest)
    • Jump to our Gazetteer entry for the McCormack Cemetery
    • Note: The GPS coordinates that we are using for the McCormack Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Continue List   (355 more) ...
    • Naylor Cemetery
      (6 miles [9.7 km] to the southeast)
      • Jump to our Gazetteer entry for the Naylor Cemetery
      • Note: The GPS coordinates that we are using for the Naylor Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Hilldale Cemetery
      (6 miles [9.7 km] to the west)
      • Jump to our Gazetteer entry for the Hilldale Cemetery
      • Note: The GPS coordinates that we are using for the Hilldale Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Junction City Cemetery
      (7 miles [11.3 km] to the west)

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>

The Rand McNally Atlas shows that in 1895, Hubble had a post office and no railroad service.

These communities are listed based on their distance from Hubble, with the one closest to Hubble listed first.

  • Hedgeville
    (2 miles [3.2 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Hedgeville. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Hedgeville
    • Hedgeville is located in Boyle County
  • Hedgeville
    (2 miles [3.2 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Hedgeville. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Hedgeville
    • Hedgeville is located in Montgomery County
    • Hedgeville has also been known as:
    • Hedges
  • Gilbert
    (3 miles [4.8 km] to the southeast)
    • Note: We haven't been able to verify our GPS coordinates for Gilbert. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Gilbert
    • Gilbert is located in Lincoln County
  • Stanford
    (4 miles [6.4 km] to the south)
  • Lancaster
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for Lancaster have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lancaster
    • Lancaster is located in Garrard County
    • Population from the 2020 Census: 3,840 people
    • Jump to TripAdvisor's Tourism page for Lancaster <3>
  • Rowland
    (5 miles [8 km] to the south)
    • Jump to our Gazetteer entry for Rowland
    • Rowland is located in Lincoln County
  • Marksbury
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for Marksbury have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Marksbury
    • Marksbury is located in Garrard County
  • Shelby City
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for Shelby City have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Shelby City
    • Shelby City is located in Boyle County
  • Hyattsville
    (7 miles [11.3 km] to the east)
    • Note: We haven't been able to verify our GPS coordinates for Hyattsville. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Hyattsville
    • Hyattsville is located in Garrard County
  • Judson
    (7 miles [11.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Judson have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Judson
    • Judson is located in Garrard County
  • Danville
    (7 miles [11.3 km] to the northwest)
  • Junction City
    (7 miles [11.3 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for Junction City. Although the coordinates have been estimated, they should be in the vicinity.<2>
    • Jump to our Gazetteer entry for Junction City
    • Junction City is located in Boyle County
    • Population from the 2020 Census: 2,338 people
    • Jump to TripAdvisor's Tourism page for Junction City <3>
  • Continue List   (19 more) ...
    • Maywood
      (8 miles [12.9 km] to the south)
      • Note: We haven't been able to verify our GPS coordinates for Maywood. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Maywood
      • Maywood is located in Lincoln County
    • Walnut Flat
      (8 miles [12.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Walnut Flat have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Walnut Flat
      • Walnut Flat is located in Lincoln County
    • Preachersville
      (8 miles [12.9 km] to the southeast)
      • Note: We haven't been able to verify our GPS coordinates for Preachersville. Although the coordinates have been estimated, they should be in the vicinity.<2>
      • Jump to our Gazetteer entry for Preachersville
      • Preachersville is located in Lincoln County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Hubble. See our List of 1890's Communities around Hubble.

Newspapers Published in Hubble ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 86 newspapers that have been published in the area around Hubble.

Although we're unaware of any newspapers that were published in the immediate area of Hubble, there are papers which were published within 20 miles [32.2 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Hubble.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first turn to the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Hubble:

Unfortunately, we don't know of a website for Hubble. If you can help, please contact us through our Feedback Page.

The official website for State of Kentucky: https://kentucky.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Hubble, please let us know so that we can improve our accuracy.
<6>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Hubble) to Point B.Our distance measurements begin at a specific point in Hubble. The point we use is located at these GPS coordinates - Latitude: 37.5970, Longitude: -84.6547       In this case, the coordinates for Hubble have been provided by the Geographic Names Information System (GNIS).




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 28 Apr 2025