|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Hesler had a post office and no railroad service.
The following communities are listed based on their distance from Hesler, with the one closest to Hesler listed first.
- Hallam
(2 miles [3.2 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Hallam. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Hallam
- Hallam is located in Owen County
- Breck
(3 miles [4.8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Breck. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Breck
- Breck is located in Owen County
- Beechwood
(4 miles [6.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Beechwood. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Beechwood
- Beechwood is located in Owen County
- Monterey
(5 miles [8 km] to the southwest)
- Jump to our Gazetteer entry for Monterey
- Monterey is located in Owen County
- Population from the 2020 Census: 136 people
- Gest
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Gest have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gest
- Gest is located in Henry County
- Tacketts Mill
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Tacketts Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tacketts Mill
- Tacketts Mill is located in Owen County
- Harmony
(6 miles [9.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Harmony. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Harmony
- Harmony is located in Owen County
- Rockdale
(6 miles [9.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Rockdale. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Rockdale
- Rockdale is located in Owen County
- Owenton
(6 miles [9.7 km] to the northwest)
- Sweet Owen
(6 miles [9.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Sweet Owen. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Sweet Owen
- Sweet Owen is located in Owen County
- New Columbus
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for New Columbus have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Columbus
- New Columbus is located in Owen County
- Canby
(7 miles [11.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Canby. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Canby
- Canby is located in Owen County
- Pleasant Home
(7 miles [11.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Pleasant Home. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Pleasant Home
- Pleasant Home is located in Owen County
- Elmville
(8 miles [12.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Elmville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Elmville
- Elmville is located in Franklin County
- Josephine
(8 miles [12.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Josephine. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Josephine
- Josephine is located in Scott County
- Polsgrove
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Polsgrove have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Polsgrove
- Polsgrove is located in Franklin County
- Keefer
(9 miles [14.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Keefer. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Keefer
- Keefer is located in Grant County
- Lawrenceville
(9 miles [14.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Lawrenceville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Lawrenceville
- Lawrenceville is located in Grant County
- Holbrook
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Holbrook have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holbrook
- Holbrook is located in Grant County
- Gratz
(9 miles [14.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Gratz. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Gratz
- Gratz is located in Owen County
- Population from the 2020 Census: 79 people
- Lockport
(10 miles [16.1 km] to the west)
- Jump to our Gazetteer entry for Lockport
- Lockport is located in Henry County
- Minorsville
(10 miles [16.1 km] to the southeast)
- Jump to our Gazetteer entry for Minorsville
- Minorsville is located in Scott County
- Longlick
(10 miles [16.1 km] to the southeast)
- Jump to our Gazetteer entry for Longlick
- Longlick is located in Scott County
- Porter
(10 miles [16.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Porter. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Porter
- Porter is located in Scott County
- Peaks Mill
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Peaks Mill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peaks Mill
- Peaks Mill is located in Franklin County
- Stonewall
(11 miles [17.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Stonewall. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Stonewall
- Stonewall is located in Scott County
- Corinth
(11 miles [17.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Corinth. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Corinth
- Corinth is located in Grant County
- Population from the 2020 Census: 228 people
- Jump to TripAdvisor's Tourism page for Corinth <4>
- Blanchet
(11 miles [17.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Blanchet. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Blanchet
- Blanchet is located in Grant County
- Squiresville
(11 miles [17.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Squiresville. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Squiresville
- Squiresville is located in Owen County
Off-the-Road Links ...
The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Hesler, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|