|
Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Faulconer (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Faulconer. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Faulconer is located in Boyle County.
To see how the shape of Kentucky's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Boyle County: Casey, Garrard, Jessamine, Lincoln, Mercer & Washington.
Below are the counties that are near Faulconer. For each of these counties, we show a sample of those communities that are closest to Faulconer:
- Boyle County (The home county of Faulconer)
- The following are listed by their distance from Faulconer, with the one closest to Faulconer listed first.
- Danville
(4 miles [6.4 km] to the south)
- West Danville
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for West Danville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Danville
- West Danville is located in Boyle County
- Little Needmore
(4 miles [6.4 km] to the southeast)
- Davis Hill
(4 miles [6.4 km] to the southwest)
- Atoka
(5 miles [8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Atoka. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Atoka
- Atoka is located in Boyle County
- Google driving directions:
- From your current location to Atoka
- From Faulconer to Atoka
- Clifton
(6 miles [9.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Clifton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Clifton
- Clifton is located in Boyle County
- Google driving directions:
- From your current location to Clifton
- From Faulconer to Clifton
- Needmore
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Needmore have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Needmore
- Needmore is located in Boyle County
- Hedgeville
(7 miles [11.3 km] to the southeast)
- Alum Springs
(8 miles [12.9 km] to the south)
- Junction City
(8 miles [12.9 km] to the south)
- Shelby City
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Shelby City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shelby City
- Shelby City is located in Boyle County
- Parksville
(9 miles [14.5 km] to the southwest)
- Perryville
(9 miles [14.5 km] to the southwest)
- Anderson County
- The following are listed by their distance from Faulconer, with the one closest to Faulconer listed first.
- McBrayer
(19 miles [30.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for McBrayer. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for McBrayer
- McBrayer is located in Anderson County
- Google driving directions:
- From your current location to McBrayer
- From Faulconer to McBrayer
- Ashbrook
(21 miles [33.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Ashbrook. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ashbrook
- Ashbrook is located in Anderson County
- Google driving directions:
- From your current location to Ashbrook
- From Faulconer to Ashbrook
- Fox Creek
(21 miles [33.8 km] to the northwest)
- Sinai
(21 miles [33.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Sinai. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Sinai
- Sinai is located in Anderson County
- Google driving directions:
- From your current location to Sinai
- From Faulconer to Sinai
- Tyrone
(22 miles [35.4 km] to the north)
- Lawrenceburg
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Lawrenceburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lawrenceburg
- Lawrenceburg is located in Anderson County
- Population from the 2020 Census: 11,529 people
- Jump to TripAdvisor's Tourism page for Lawrenceburg <1>
- Anderson City
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for Anderson City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Anderson City
- Anderson City is located in Anderson County
- Sparrow
(24 miles [38.6 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Sparrow. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Sparrow
- Sparrow is located in Anderson County
- Google driving directions:
- From your current location to Sparrow
- From Faulconer to Sparrow
- Glensboro
(25 miles [40.2 km] to the northwest)
- Birdie
(26 miles [41.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Birdie. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Birdie
- Birdie is located in Anderson County
- Google driving directions:
- From your current location to Birdie
- From Faulconer to Birdie
- Alton Station
(27 miles [43.5 km] to the north)
- Van Buren
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Van Buren
- Van Buren is located in Anderson County
- Avenstoke
(30 miles [48.3 km] to the northwest)
- Casey County
- The following are listed by their distance from Faulconer, with the one closest to Faulconer listed first.
- Butchertown
(14 miles [22.5 km] to the southwest)
- Middleburg
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for Middleburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middleburg
- Middleburg is located in Casey County
- Yosemite
(25 miles [40.2 km] to the south)
- Liberty
(28 miles [45.1 km] to the south)
- Atterson
(30 miles [48.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Atterson. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Atterson
- Atterson is located in Casey County
- Google driving directions:
- From your current location to Atterson
- From Faulconer to Atterson
- Clark County
- Ford
(30 miles [48.3 km] to the northeast)
- Fayette County
- The following are listed by their distance from Faulconer, with the one closest to Faulconer listed first.
- Spears
(22 miles [35.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Spears. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Spears
- Spears is located in Fayette County
- Google driving directions:
- From your current location to Spears
- From Faulconer to Spears
- Elk Chester
(26 miles [41.8 km] to the north)
- Colony
(26 miles [41.8 km] to the northeast)
- Lexington - Fayette
(27 miles [43.5 km] to the northeast)
- Athens
(28 miles [45.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Athens. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Athens
- Athens is located in Fayette County
- Google driving directions:
- From your current location to Athens
- From Faulconer to Athens
- Cadentown
(28 miles [45.1 km] to the northeast)
- Fairway
(28 miles [45.1 km] to the northeast)
- Lexington
(28 miles [45.1 km] to the northeast)
- Yarnallton
(29 miles [46.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Yarnallton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Yarnallton
- Yarnallton is located in Fayette County
- Google driving directions:
- From your current location to Yarnallton
- From Faulconer to Yarnallton
- Bracktown
(29 miles [46.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Bracktown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bracktown
- Bracktown is located in Fayette County
- Deep Springs
(30 miles [48.3 km] to the northeast)
- Franklin County
- Farmdale
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Farmdale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Farmdale
- Farmdale is located in Franklin County
- Garrard County
- The following are listed by their distance from Faulconer, with the one closest to Faulconer listed first.
- Bryantsville
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Bryantsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bryantsville
- Bryantsville is located in Garrard County
- Jump to TripAdvisor's Tourism page for Bryantsville <1>
- Stone
(12 miles [19.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Stone. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Stone
- Stone is located in Garrard County
- Google driving directions:
- From your current location to Stone
- From Faulconer to Stone
- Lancaster
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Lancaster have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lancaster
- Lancaster is located in Garrard County
- Population from the 2020 Census: 3,840 people
- Jump to TripAdvisor's Tourism page for Lancaster <1>
- Hyattsville
(15 miles [24.1 km] to the southeast)
- Nina
(17 miles [27.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Nina. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Nina
- Nina is located in Garrard County
- Google driving directions:
- From your current location to Nina
- From Faulconer to Nina
- Lowell
(20 miles [32.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Lowell. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Lowell
- Lowell is located in Garrard County
- Google driving directions:
- From your current location to Lowell
- From Faulconer to Lowell
- Paint Lick
(21 miles [33.8 km] to the east)
- Cartersville
(23 miles [37 km] to the southeast)
- Harlan County
- Rutherford
(19 miles [30.6 km] to the east)
- Jessamine County
- The following are listed by their distance from Faulconer, with the one closest to Faulconer listed first.
- High Bridge
(8 miles [12.9 km] to the northeast)
- Hall
(10 miles [16.1 km] to the northeast)
- Little Hickman
(12 miles [19.3 km] to the east)
- Wilmore
(12 miles [19.3 km] to the northeast)
- Hanly
(13 miles [20.9 km] to the northeast)
- Troy
(14 miles [22.5 km] to the north)
- Jessamine
(14 miles [22.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Jessamine. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Jessamine
- Jessamine is located in Jessamine County
- Google driving directions:
- From your current location to Jessamine
- From Faulconer to Jessamine
- Vineyard
(14 miles [22.5 km] to the northeast)
- Nicholasville
(16 miles [25.7 km] to the northeast)
- Pollard
(16 miles [25.7 km] to the northeast)
- Dixon Town ‑ Historic
(17 miles [27.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Dixon Town. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Dixon Town
- Dixon Town is located in Jessamine County
- Google driving directions:
- From your current location to Dixon Town
- From Faulconer to Dixon Town
- Mount Lebanon
(17 miles [27.4 km] to the northeast)
- Keene
(18 miles [29 km] to the northeast)
- Lincoln County
- The following are listed by their distance from Faulconer, with the one closest to Faulconer listed first.
- Hubble
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Hubble have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hubble
- Hubble is located in Lincoln County
- Milledgeville
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Milledgeville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milledgeville
- Milledgeville is located in Lincoln County
- Gilbert
(13 miles [20.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Gilbert. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Gilbert
- Gilbert is located in Lincoln County
- Google driving directions:
- From your current location to Gilbert
- From Faulconer to Gilbert
- Logantown
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Logantown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Logantown
- Logantown is located in Lincoln County
- Stanford
(13 miles [20.9 km] to the southeast)
- Boneyville
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Boneyville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boneyville
- Boneyville is located in Lincoln County
- Moreland
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Moreland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moreland
- Moreland is located in Lincoln County
- Blue Lick
(15 miles [24.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Blue Lick. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Blue Lick
- Blue Lick is located in Lincoln County
- Google driving directions:
- From your current location to Blue Lick
- From Faulconer to Blue Lick
- Chicken Bristle
(15 miles [24.1 km] to the south)
- Turnersville
(15 miles [24.1 km] to the south)
- Rowland
(15 miles [24.1 km] to the southeast)
- Hustonville
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Hustonville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hustonville
- Hustonville is located in Lincoln County
- Population from the 2020 Census: 368 people
- Jump to TripAdvisor's Tourism page for Hustonville <1>
- Jumbo
(17 miles [27.4 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Jumbo. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Jumbo
- Jumbo is located in Lincoln County
- Google driving directions:
- From your current location to Jumbo
- From Faulconer to Jumbo
- Madison County
- The following are listed by their distance from Faulconer, with the one closest to Faulconer listed first.
- Edenton
(16 miles [25.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Edenton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Edenton
- Edenton is located in Madison County
- Google driving directions:
- From your current location to Edenton
- From Faulconer to Edenton
- Cottonburg
(17 miles [27.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Cottonburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Cottonburg
- Cottonburg is located in Madison County
- Google driving directions:
- From your current location to Cottonburg
- From Faulconer to Cottonburg
- Ruthton
(19 miles [30.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Ruthton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ruthton
- Ruthton is located in Madison County
- Google driving directions:
- From your current location to Ruthton
- From Faulconer to Ruthton
- Baldwin
(20 miles [32.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Baldwin. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Baldwin
- Baldwin is located in Madison County
- Google driving directions:
- From your current location to Baldwin
- From Faulconer to Baldwin
- Kirksville
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Kirksville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kirksville
- Kirksville is located in Madison County
- Newby
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Newby have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newby
- Newby is located in Madison County
- Round Hill
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Round Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Round Hill
- Round Hill is located in Madison County
- Cuzick
(20 miles [32.2 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Cuzick. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Cuzick
- Cuzick is located in Madison County
- Google driving directions:
- From your current location to Cuzick
- From Faulconer to Cuzick
- Stringtown
(21 miles [33.8 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Stringtown. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Stringtown
- Stringtown is located in Madison County
- Google driving directions:
- From your current location to Stringtown
- From Faulconer to Stringtown
- Valley View
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Valley View have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Valley View
- Valley View is located in Madison County
- Happy Landing
(22 miles [35.4 km] to the east)
- Million
(22 miles [35.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Million. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Million
- Million is located in Madison County
- Google driving directions:
- From your current location to Million
- From Faulconer to Million
- Buggytown
(23 miles [37 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Buggytown. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Buggytown
- Buggytown is located in Madison County
- Google driving directions:
- From your current location to Buggytown
- From Faulconer to Buggytown
- Marion County
- The following are listed by their distance from Faulconer, with the one closest to Faulconer listed first.
- Gravel Switch
(17 miles [27.4 km] to the southwest)
- Riley
(20 miles [32.2 km] to the southwest)
- Poplar Corner
(21 miles [33.8 km] to the west)
- Penick
(22 miles [35.4 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Penick. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Penick
- Penick is located in Marion County
- Google driving directions:
- From your current location to Penick
- From Faulconer to Penick
- Simstown
(22 miles [35.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Simstown. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Simstown
- Simstown is located in Marion County
- Google driving directions:
- From your current location to Simstown
- From Faulconer to Simstown
- Bradfordsville
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Bradfordsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bradfordsville
- Bradfordsville is located in Marion County
- Population from the 2020 Census: 299 people
- Jump to TripAdvisor's Tourism page for Bradfordsville <1>
- Lebanon
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Lebanon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lebanon
- Lebanon is located in Marion County
- Population from the 2020 Census: 5,733 people
- Jump to TripAdvisor's Tourism page for Lebanon <1>
- Greenbriar
(28 miles [45.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Greenbriar. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Greenbriar
- Greenbriar is located in Marion County
- Google driving directions:
- From your current location to Greenbriar
- From Faulconer to Greenbriar
- Peck Ford
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Peck Ford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peck Ford
- Peck Ford is located in Marion County
- Calvary
(29 miles [46.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Calvary have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calvary
- Calvary is located in Marion County
- Salleetown
(29 miles [46.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Salleetown. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Salleetown
- Salleetown is located in Marion County
- Google driving directions:
- From your current location to Salleetown
- From Faulconer to Salleetown
- Belltown
(30 miles [48.3 km] to the southwest)
- Mercer County
- The following are listed by their distance from Faulconer, with the one closest to Faulconer listed first.
- Burgin
(3 miles [4.8 km] to the north)
- Harrodsburg
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Harrodsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harrodsburg
- Harrodsburg is located in Mercer County
- Population from the 2020 Census: 8,544 people
- Jump to TripAdvisor's Tourism page for Harrodsburg <1>
- Nevada
(6 miles [9.7 km] to the west)
- Braxton
(9 miles [14.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Braxton. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Braxton
- Braxton is located in Mercer County
- Google driving directions:
- From your current location to Braxton
- From Faulconer to Braxton
- Jackson
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Jackson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jackson
- Jackson is located in Mercer County
- Dixville
(9 miles [14.5 km] to the west)
- McAfee
(10 miles [16.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for McAfee. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for McAfee
- McAfee is located in Mercer County
- Google driving directions:
- From your current location to McAfee
- From Faulconer to McAfee
- Stewart
(12 miles [19.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Stewart. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Stewart
- Stewart is located in Mercer County
- Google driving directions:
- From your current location to Stewart
- From Faulconer to Stewart
- Mayo
(13 miles [20.9 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Mayo. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Mayo
- Mayo is located in Mercer County
- Google driving directions:
- From your current location to Mayo
- From Faulconer to Mayo
- Vanarsdell
(13 miles [20.9 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Vanarsdell. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Vanarsdell
- Vanarsdell is located in Mercer County
- Google driving directions:
- From your current location to Vanarsdell
- From Faulconer to Vanarsdell
- Duncan
(14 miles [22.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Duncan. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Duncan
- Duncan is located in Mercer County
- Google driving directions:
- From your current location to Duncan
- From Faulconer to Duncan
- Salvisa
(15 miles [24.1 km] to the north)
- Tablow
(16 miles [25.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Tablow. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Tablow
- Tablow is located in Mercer County
- Google driving directions:
- From your current location to Tablow
- From Faulconer to Tablow
- Montgomery County
- Hedgeville
(7 miles [11.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Hedgeville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hedgeville
- Hedgeville is located in Montgomery County
- Hedgeville has also been known as:
- Hedges
- Google driving directions:
- From your current location to Hedgeville
- From Faulconer to Hedgeville
- Nelson County
- Chaplin
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Chaplin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chaplin
- Chaplin is located in Nelson County
- Jump to TripAdvisor's Tourism page for Chaplin <1>
- Pulaski County
- The following are listed by their distance from Faulconer, with the one closest to Faulconer listed first.
- Eubank
(30 miles [48.3 km] to the south)
- Bee Lick
(30 miles [48.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Bee Lick. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bee Lick
- Bee Lick is located in Pulaski County
- Google driving directions:
- From your current location to Bee Lick
- From Faulconer to Bee Lick
- Rockcastle County
- The following are listed by their distance from Faulconer, with the one closest to Faulconer listed first.
- Gum Sulphur
(26 miles [41.8 km] to the southeast)
- Brodhead
(29 miles [46.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Brodhead have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brodhead
- Brodhead is located in Rockcastle County
- Population from the 2020 Census: 1,185 people
- Jump to TripAdvisor's Tourism page for Brodhead <1>
- Conway
(29 miles [46.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Conway. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Conway
- Conway is located in Rockcastle County
- Google driving directions:
- From your current location to Conway
- From Faulconer to Conway
- Ottawa
(29 miles [46.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Ottawa. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ottawa
- Ottawa is located in Rockcastle County
- Google driving directions:
- From your current location to Ottawa
- From Faulconer to Ottawa
- Scott County
- Zion Hill
(29 miles [46.7 km] to the north)
- Shelby County
- Harrisonville
(30 miles [48.3 km] to the northwest)
- Washington County
- The following are listed by their distance from Faulconer, with the one closest to Faulconer listed first.
- Jenkinsville
(14 miles [22.5 km] to the west)
- Mackville
(15 miles [24.1 km] to the west)
- Seaville
(18 miles [29 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Seaville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Seaville
- Seaville is located in Washington County
- Google driving directions:
- From your current location to Seaville
- From Faulconer to Seaville
- Sharpsville
(18 miles [29 km] to the northwest)
- Thompsonville
(19 miles [30.6 km] to the west)
- Willisburg
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Willisburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willisburg
- Willisburg is located in Washington County
- Population from the 2020 Census: 282 people
- Jump to TripAdvisor's Tourism page for Willisburg <1>
- Tatham Springs
(21 miles [33.8 km] to the northwest)
- Pulliam
(22 miles [35.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Pulliam. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Pulliam
- Pulliam is located in Washington County
- Google driving directions:
- From your current location to Pulliam
- From Faulconer to Pulliam
- Litsey
(22 miles [35.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Litsey. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Litsey
- Litsey is located in Washington County
- Google driving directions:
- From your current location to Litsey
- From Faulconer to Litsey
- Brush Grove
(23 miles [37 km] to the northwest)
- Springfield
(23 miles [37 km] to the west)
- Note: The GPS coordinates that we are using for Springfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springfield
- Springfield is located in Washington County
- Population from the 2020 Census: 2,987 people
- Jump to TripAdvisor's Tourism page for Springfield <1>
- Saint Catharine
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Saint Catharine have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Catharine
- Saint Catharine is located in Washington County
- Mooresville
(27 miles [43.5 km] to the west)
- Woodford County
- The following are listed by their distance from Faulconer, with the one closest to Faulconer listed first.
- Mundys Landing
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Mundys Landing have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mundys Landing
- Mundys Landing is located in Woodford County
- Nonesuch
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Nonesuch have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nonesuch
- Nonesuch is located in Woodford County
- Mortonsville
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for Mortonsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mortonsville
- Mortonsville is located in Woodford County
- Pinckard
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Pinckard have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pinckard
- Pinckard is located in Woodford County
- Milner
(22 miles [35.4 km] to the north)
- Hunter Town
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Hunter Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hunter Town
- Hunter Town is located in Woodford County
- Versailles
(23 miles [37 km] to the north)
- Woodford Village
(23 miles [37 km] to the north)
- Note: The GPS coordinates that we are using for Woodford Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodford Village
- Woodford Village is located in Woodford County
- Firmantown
(24 miles [38.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Firmantown. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Firmantown
- Firmantown is located in Woodford County
- Google driving directions:
- From your current location to Firmantown
- From Faulconer to Firmantown
- Gaybourn
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Gaybourn have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gaybourn
- Gaybourn is located in Woodford County
- Pisgah
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Pisgah have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pisgah
- Pisgah is located in Woodford County
- Bonita
(26 miles [41.8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Bonita. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Bonita
- Bonita is located in Woodford County
- Google driving directions:
- From your current location to Bonita
- From Faulconer to Bonita
- Clifton
(26 miles [41.8 km] to the north)
- Note: The GPS coordinates that we are using for Clifton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clifton
- Clifton is located in Woodford County
For an expanded list of the communities that are closest to Faulconer, see our County-by-County Page for Faulconer.
Cemeteries Near Faulconer ...
Below are cemeteries that are in the vicinity of Faulconer.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Faulconer covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Faulconer, with the one closest to Faulconer listed first.
- Robinson Road Cemetery
(2 miles [3.2 km] to the northeast)
- Jump to our Gazetteer entry for the Robinson Road Cemetery
- Note: The GPS coordinates that we are using for the Robinson Road Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Burgin Cemetery
(2 miles [3.2 km] to the north)
- Jump to our Gazetteer entry for the Burgin Cemetery
- Note: The GPS coordinates that we are using for the Burgin Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Burgin Memorial Gardens
(2 miles [3.2 km] to the north)
- Jump to our Gazetteer entry for the Burgin Memorial Gardens
- Note: The GPS coordinates that we are using for the Burgin Memorial Gardens have been provided by the GNIS.<2> The coordinates still need to be verified.
- Bellevue Cemetery
(3 miles [4.8 km] to the south)
- Salt River Cemetery
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for the Salt River Cemetery
- Note: The GPS coordinates that we are using for the Salt River Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Sallee Cemetery
(4 miles [6.4 km] to the east)
- Jump to our Gazetteer entry for the Sallee Cemetery
- Note: The GPS coordinates that we are using for the Sallee Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Proctor Cemetery
(4 miles [6.4 km] to the northeast)
- Jump to our Gazetteer entry for the Proctor Cemetery
- Note: The GPS coordinates that we are using for the Proctor Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Hilldale Cemetery
(5 miles [8 km] to the south)
- Jump to our Gazetteer entry for the Hilldale Cemetery
- Note: The GPS coordinates that we are using for the Hilldale Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Spring Hill Cemetery
(5 miles [8 km] to the northwest)
- Bethel Church Cemetery
(6 miles [9.7 km] to the west)
- Jump to our Gazetteer entry for the Bethel Church Cemetery
- Note: The GPS coordinates that we are using for the Bethel Church Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Gray Cemetery
(7 miles [11.3 km] to the south)
- Jump to our Gazetteer entry for the Gray Cemetery
- Note: The GPS coordinates that we are using for the Gray Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Oakland Cemetery
(7 miles [11.3 km] to the northwest)
- Jump to our Gazetteer entry for the Oakland Cemetery
- Note: The GPS coordinates that we are using for the Oakland Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Continue List (312 more) ...
- Berea Cemetery
(7 miles [11.3 km] to the northwest)
- Jump to our Gazetteer entry for the Berea Cemetery
- Note: The GPS coordinates that we are using for the Berea Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Danville Memorial Gardens
(8 miles [12.9 km] to the south)
- Mt. Pleasant Cemetery
(8 miles [12.9 km] to the northwest)
- Jump to our Gazetteer entry for the Mt. Pleasant Cemetery
- Note: The GPS coordinates that we are using for the Mt. Pleasant Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>
The Rand McNally Atlas shows that in 1895, Faulconer had a post office and railroad service.
These communities are listed based on their distance from Faulconer, with the one closest to Faulconer listed first.
- Burgin
(3 miles [4.8 km] to the north)
- Danville
(4 miles [6.4 km] to the south)
- Atoka
(5 miles [8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Atoka. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Atoka
- Atoka is located in Boyle County
- Google driving directions:
- From your current location to Atoka
- From Faulconer to Atoka
- Harrodsburg
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Harrodsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harrodsburg
- Harrodsburg is located in Mercer County
- Population from the 2020 Census: 8,544 people
- Jump to TripAdvisor's Tourism page for Harrodsburg <1>
- Nevada
(6 miles [9.7 km] to the west)
- Hedgeville
(7 miles [11.3 km] to the southeast)
- Hedgeville
(7 miles [11.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Hedgeville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hedgeville
- Hedgeville is located in Montgomery County
- Hedgeville has also been known as:
- Hedges
- Google driving directions:
- From your current location to Hedgeville
- From Faulconer to Hedgeville
- Bryantsville
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Bryantsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bryantsville
- Bryantsville is located in Garrard County
- Jump to TripAdvisor's Tourism page for Bryantsville <1>
- Buena Vista
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Buena Vista have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buena Vista
- Buena Vista is located in Garrard County
- Alum Springs
(8 miles [12.9 km] to the south)
- Junction City
(8 miles [12.9 km] to the south)
- Shelby City
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Shelby City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shelby City
- Shelby City is located in Boyle County
- Continue List (19 more) ...
- Marksbury
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Marksbury have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Marksbury
- Marksbury is located in Garrard County
- High Bridge
(8 miles [12.9 km] to the northeast)
- Perryville
(9 miles [14.5 km] to the southwest)
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Faulconer. See our List of 1890's Communities around Faulconer.
Newspapers Published in Faulconer ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 81 newspapers that have been published in the area around Faulconer.
Although we're unaware of any newspapers that were published in the immediate area of Faulconer, there are papers which were published within 16 miles [25.7 km]<6>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Faulconer.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Faulconer:
- Websites specific to Kentucky
- Pages specific to Boyle County
- Genealogy information for nearby counties
- Anderson County
- Casey County
- Clark County
- Fayette County
- Franklin County
- Garrard County
- Harlan County
- Jessamine County
- Lincoln County
- Madison County
- Marion County
- Mercer County
- Montgomery County
- Nelson County
- Pulaski County
- Rockcastle County
- Scott County
- Shelby County
- Washington County
- Woodford County
- Cemetery Information and Directories for Kentucky
Off-the-Road Links ...
Unfortunately, we don't know of a website for Faulconer. If you can help, please contact us through our Feedback Page. The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<5> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Faulconer, please let us know so that we can improve our accuracy. |
<6> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Faulconer) to Point B.Our distance measurements begin at a specific point in Faulconer. The point we use is located at these GPS coordinates - Latitude: 37.7073, Longitude: -84.7835 In this case, the coordinates for Faulconer have been provided by the Geographic Names Information System (GNIS). |
|
|