|
Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Duncan (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Duncan. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most doctors and hospitals were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Duncan is located in Mercer County.
To see how the shape of Kentucky's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Mercer County: Anderson, Boyle, Garrard, Jessamine, Washington & Woodford.
Below are the counties that are near Duncan. For each of these counties, we show a sample of those communities that are closest to Duncan:
- Mercer County (The home county of Duncan)
- The following are listed by their distance from Duncan, with the one closest to Duncan listed first.
- Tablow
(Less than 2 miles to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Tablow. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Tablow
- Tablow is located in Mercer County
- Google driving directions:
- From your current location to Tablow
- From Duncan to Tablow
- Mayo
(3 miles [4.8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Mayo. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Mayo
- Mayo is located in Mercer County
- Google driving directions:
- From your current location to Mayo
- From Duncan to Mayo
- Jackson
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Jackson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jackson
- Jackson is located in Mercer County
- Vanarsdell
(6 miles [9.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Vanarsdell. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Vanarsdell
- Vanarsdell is located in Mercer County
- Google driving directions:
- From your current location to Vanarsdell
- From Duncan to Vanarsdell
- McAfee
(7 miles [11.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for McAfee. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for McAfee
- McAfee is located in Mercer County
- Google driving directions:
- From your current location to McAfee
- From Duncan to McAfee
- Salvisa
(8 miles [12.9 km] to the northeast)
- Harrodsburg
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Harrodsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harrodsburg
- Harrodsburg is located in Mercer County
- Population from the 2020 Census: 8,544 people
- Jump to TripAdvisor's Tourism page for Harrodsburg <3>
- Braxton
(10 miles [16.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Braxton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Braxton
- Braxton is located in Mercer County
- Google driving directions:
- From your current location to Braxton
- From Duncan to Braxton
- Dixville
(10 miles [16.1 km] to the south)
- Stewart
(10 miles [16.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Stewart. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Stewart
- Stewart is located in Mercer County
- Google driving directions:
- From your current location to Stewart
- From Duncan to Stewart
- Nevada
(11 miles [17.7 km] to the southeast)
- Burgin
(13 miles [20.9 km] to the southeast)
- Anderson County
- The following are listed by their distance from Duncan, with the one closest to Duncan listed first.
- Ashbrook
(6 miles [9.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Ashbrook. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Ashbrook
- Ashbrook is located in Anderson County
- Google driving directions:
- From your current location to Ashbrook
- From Duncan to Ashbrook
- Sinai
(7 miles [11.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Sinai. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Sinai
- Sinai is located in Anderson County
- Google driving directions:
- From your current location to Sinai
- From Duncan to Sinai
- Fox Creek
(9 miles [14.5 km] to the north)
- McBrayer
(10 miles [16.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for McBrayer. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for McBrayer
- McBrayer is located in Anderson County
- Google driving directions:
- From your current location to McBrayer
- From Duncan to McBrayer
- Sparrow
(10 miles [16.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Sparrow. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Sparrow
- Sparrow is located in Anderson County
- Google driving directions:
- From your current location to Sparrow
- From Duncan to Sparrow
- Anderson City
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Anderson City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Anderson City
- Anderson City is located in Anderson County
- Glensboro
(11 miles [17.7 km] to the north)
- Van Buren
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Van Buren
- Van Buren is located in Anderson County
- Birdie
(13 miles [20.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Birdie. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Birdie
- Birdie is located in Anderson County
- Google driving directions:
- From your current location to Birdie
- From Duncan to Birdie
- Lawrenceburg
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Lawrenceburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lawrenceburg
- Lawrenceburg is located in Anderson County
- Population from the 2020 Census: 11,529 people
- Jump to TripAdvisor's Tourism page for Lawrenceburg <3>
- Tyrone
(15 miles [24.1 km] to the northeast)
- Alton Station
(16 miles [25.7 km] to the north)
- Boyle County
- The following are listed by their distance from Duncan, with the one closest to Duncan listed first.
- Perryville
(13 miles [20.9 km] to the south)
- Faulconer
(14 miles [22.5 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Faulconer. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Faulconer
- Faulconer is located in Boyle County
- Google driving directions:
- From your current location to Faulconer
- From Duncan to Faulconer
- Needmore
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Needmore have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Needmore
- Needmore is located in Boyle County
- Craintown
(15 miles [24.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Craintown. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Craintown
- Craintown is located in Boyle County
- Google driving directions:
- From your current location to Craintown
- From Duncan to Craintown
- Atoka
(15 miles [24.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Atoka. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Atoka
- Atoka is located in Boyle County
- Google driving directions:
- From your current location to Atoka
- From Duncan to Atoka
- Brumfield
(16 miles [25.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Brumfield. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Brumfield
- Brumfield is located in Boyle County
- Google driving directions:
- From your current location to Brumfield
- From Duncan to Brumfield
- Davis Hill
(16 miles [25.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Davis Hill. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Davis Hill
- Davis Hill is located in Boyle County
- Google driving directions:
- From your current location to Davis Hill
- From Duncan to Davis Hill
- Aliceton
(17 miles [27.4 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Aliceton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Aliceton
- Aliceton is located in Boyle County
- Google driving directions:
- From your current location to Aliceton
- From Duncan to Aliceton
- Mitchellsburg
(17 miles [27.4 km] to the south)
- West Danville
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for West Danville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Danville
- West Danville is located in Boyle County
- Parksville
(18 miles [29 km] to the south)
- Danville
(18 miles [29 km] to the southeast)
- Casey County
- Butchertown
(24 miles [38.6 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Butchertown. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Butchertown
- Butchertown is located in Casey County
- Google driving directions:
- From your current location to Butchertown
- From Duncan to Butchertown
- Fayette County
- The following are listed by their distance from Duncan, with the one closest to Duncan listed first.
- Elk Chester
(25 miles [40.2 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Elk Chester. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Elk Chester
- Elk Chester is located in Fayette County
- Google driving directions:
- From your current location to Elk Chester
- From Duncan to Elk Chester
- Colony
(26 miles [41.8 km] to the northeast)
- Bracktown
(28 miles [45.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Bracktown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bracktown
- Bracktown is located in Fayette County
- Yarnallton
(28 miles [45.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Yarnallton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Yarnallton
- Yarnallton is located in Fayette County
- Google driving directions:
- From your current location to Yarnallton
- From Duncan to Yarnallton
- Lexington - Fayette
(29 miles [46.7 km] to the northeast)
- Lexington
(29 miles [46.7 km] to the northeast)
- Spears
(30 miles [48.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Spears. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Spears
- Spears is located in Fayette County
- Google driving directions:
- From your current location to Spears
- From Duncan to Spears
- Franklin County
- The following are listed by their distance from Duncan, with the one closest to Duncan listed first.
- Farmdale
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for Farmdale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Farmdale
- Farmdale is located in Franklin County
- Benson
(24 miles [38.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Benson. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Benson
- Benson is located in Franklin County
- Google driving directions:
- From your current location to Benson
- From Duncan to Benson
- Buttimer Hill
(24 miles [38.6 km] to the north)
- Frankfort
(25 miles [40.2 km] to the north)
- Forks of Elkhorn
(27 miles [43.5 km] to the north)
- Woodlake
(28 miles [45.1 km] to the northeast)
- Garrard County
- The following are listed by their distance from Duncan, with the one closest to Duncan listed first.
- Bryantsville
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Bryantsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bryantsville
- Bryantsville is located in Garrard County
- Jump to TripAdvisor's Tourism page for Bryantsville <3>
- Stone
(25 miles [40.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Stone. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Stone
- Stone is located in Garrard County
- Google driving directions:
- From your current location to Stone
- From Duncan to Stone
- Lancaster
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Lancaster have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lancaster
- Lancaster is located in Garrard County
- Population from the 2020 Census: 3,840 people
- Jump to TripAdvisor's Tourism page for Lancaster <3>
- Hyattsville
(30 miles [48.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Hyattsville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Hyattsville
- Hyattsville is located in Garrard County
- Google driving directions:
- From your current location to Hyattsville
- From Duncan to Hyattsville
- Jessamine County
- The following are listed by their distance from Duncan, with the one closest to Duncan listed first.
- High Bridge
(14 miles [22.5 km] to the east)
- Troy
(16 miles [25.7 km] to the east)
- Wilmore
(18 miles [29 km] to the east)
- Dixon Town ‑ Historic
(19 miles [30.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Dixon Town. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Dixon Town
- Dixon Town is located in Jessamine County
- Google driving directions:
- From your current location to Dixon Town
- From Duncan to Dixon Town
- Keene
(19 miles [30.6 km] to the east)
- Hall
(20 miles [32.2 km] to the east)
- Jessamine
(20 miles [32.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Jessamine. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Jessamine
- Jessamine is located in Jessamine County
- Google driving directions:
- From your current location to Jessamine
- From Duncan to Jessamine
- Hanly
(21 miles [33.8 km] to the east)
- Vineyard
(21 miles [33.8 km] to the east)
- Nicholasville
(22 miles [35.4 km] to the east)
- Little Hickman
(23 miles [37 km] to the east)
- Catnip ‑ Historic
(24 miles [38.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Catnip. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Catnip
- Catnip is located in Jessamine County
- Google driving directions:
- From your current location to Catnip
- From Duncan to Catnip
- Lawrence County
- Castle ‑ Historic
(26 miles [41.8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Castle. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Castle
- Castle is located in Lawrence County
- Google driving directions:
- From your current location to Castle
- From Duncan to Castle
- Lincoln County
- The following are listed by their distance from Duncan, with the one closest to Duncan listed first.
- Milledgeville
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Milledgeville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milledgeville
- Milledgeville is located in Lincoln County
- Hubble
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Hubble have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hubble
- Hubble is located in Lincoln County
- Moreland
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Moreland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moreland
- Moreland is located in Lincoln County
- Hustonville
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Hustonville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hustonville
- Hustonville is located in Lincoln County
- Population from the 2020 Census: 368 people
- Jump to TripAdvisor's Tourism page for Hustonville <3>
- Chicken Bristle
(27 miles [43.5 km] to the southeast)
- Boneyville
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Boneyville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Boneyville
- Boneyville is located in Lincoln County
- Gilbert
(28 miles [45.1 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Gilbert. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Gilbert
- Gilbert is located in Lincoln County
- Google driving directions:
- From your current location to Gilbert
- From Duncan to Gilbert
- Logantown
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Logantown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Logantown
- Logantown is located in Lincoln County
- Stanford
(28 miles [45.1 km] to the southeast)
- Turnersville
(28 miles [45.1 km] to the southeast)
- Blue Lick
(29 miles [46.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Blue Lick. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Blue Lick
- Blue Lick is located in Lincoln County
- Google driving directions:
- From your current location to Blue Lick
- From Duncan to Blue Lick
- Rowland
(29 miles [46.7 km] to the southeast)
- Madison County
- The following are listed by their distance from Duncan, with the one closest to Duncan listed first.
- Edenton
(28 miles [45.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Edenton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Edenton
- Edenton is located in Madison County
- Google driving directions:
- From your current location to Edenton
- From Duncan to Edenton
- Cottonburg
(29 miles [46.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Cottonburg. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Cottonburg
- Cottonburg is located in Madison County
- Google driving directions:
- From your current location to Cottonburg
- From Duncan to Cottonburg
- Cuzick
(29 miles [46.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Cuzick. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Cuzick
- Cuzick is located in Madison County
- Google driving directions:
- From your current location to Cuzick
- From Duncan to Cuzick
- Valley View
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Valley View have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Valley View
- Valley View is located in Madison County
- Marion County
- The following are listed by their distance from Duncan, with the one closest to Duncan listed first.
- Gravel Switch
(18 miles [29 km] to the south)
- Poplar Corner
(18 miles [29 km] to the southwest)
- Simstown
(18 miles [29 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Simstown. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Simstown
- Simstown is located in Marion County
- Google driving directions:
- From your current location to Simstown
- From Duncan to Simstown
- Riley
(20 miles [32.2 km] to the south)
- Penick
(21 miles [33.8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Penick. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Penick
- Penick is located in Marion County
- Google driving directions:
- From your current location to Penick
- From Duncan to Penick
- Burkes Spring
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Burkes Spring have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burkes Spring
- Burkes Spring is located in Marion County
- Gandertown
(24 miles [38.6 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Gandertown. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Gandertown
- Gandertown is located in Marion County
- Google driving directions:
- From your current location to Gandertown
- From Duncan to Gandertown
- Lebanon
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Lebanon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lebanon
- Lebanon is located in Marion County
- Population from the 2020 Census: 5,733 people
- Jump to TripAdvisor's Tourism page for Lebanon <3>
- Bradfordsville
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Bradfordsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bradfordsville
- Bradfordsville is located in Marion County
- Population from the 2020 Census: 299 people
- Jump to TripAdvisor's Tourism page for Bradfordsville <3>
- Nerinx
(25 miles [40.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Nerinx have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nerinx
- Nerinx is located in Marion County
- Loretto
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Loretto have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loretto
- Loretto is located in Marion County
- Population from the 2020 Census: 692 people
- Jump to TripAdvisor's Tourism page for Loretto <3>
- Saint Mary
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Saint Mary have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Mary
- Saint Mary is located in Marion County
- Jump to TripAdvisor's Tourism page for Saint Mary <3>
- Montgomery County
- Hedgeville
(22 miles [35.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Hedgeville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Hedgeville
- Hedgeville is located in Montgomery County
- Hedgeville has also been known as:
- Hedges
- Google driving directions:
- From your current location to Hedgeville
- From Duncan to Hedgeville
- Nelson County
- The following are listed by their distance from Duncan, with the one closest to Duncan listed first.
- Chaplin
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Chaplin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chaplin
- Chaplin is located in Nelson County
- Jump to TripAdvisor's Tourism page for Chaplin <3>
- Bloomfield
(18 miles [29 km] to the west)
- Woodlawn
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Woodlawn have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodlawn
- Woodlawn is located in Nelson County
- Botland
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Botland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Botland
- Botland is located in Nelson County
- East Bardstown
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for East Bardstown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Bardstown
- East Bardstown is located in Nelson County
- Fairfield
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Fairfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairfield
- Fairfield is located in Nelson County
- Population from the 2020 Census: 113 people
- Bardstown
(26 miles [41.8 km] to the west)
- Bourbon Springs
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Bourbon Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bourbon Springs
- Bourbon Springs is located in Nelson County
- Coxs Creek
(26 miles [41.8 km] to the west)
- Greenbrier
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Greenbrier have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenbrier
- Greenbrier is located in Nelson County
- Nazareth
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Nazareth have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nazareth
- Nazareth is located in Nelson County
- Withrow
(26 miles [41.8 km] to the west)
- Scott County
- The following are listed by their distance from Duncan, with the one closest to Duncan listed first.
- Zion Hill
(26 miles [41.8 km] to the northeast)
- Payne's Depot
(28 miles [45.1 km] to the northeast)
- White Sulphur
(29 miles [46.7 km] to the northeast)
- Lancelot Estates
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Lancelot Estates have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lancelot Estates
- Lancelot Estates is located in Scott County
- Peak
(30 miles [48.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Peak. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Peak
- Peak is located in Scott County
- Google driving directions:
- From your current location to Peak
- From Duncan to Peak
- Sand Lick
(30 miles [48.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Sand Lick. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Sand Lick
- Sand Lick is located in Scott County
- Google driving directions:
- From your current location to Sand Lick
- From Duncan to Sand Lick
- Watkinsville
(30 miles [48.3 km] to the northeast)
- Shelby County
- The following are listed by their distance from Duncan, with the one closest to Duncan listed first.
- Harrisonville
(17 miles [27.4 km] to the north)
- Waddy
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Waddy have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Waddy
- Waddy is located in Shelby County
- Jump to TripAdvisor's Tourism page for Waddy <3>
- Southville
(20 miles [32.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Southville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Southville
- Southville is located in Shelby County
- Google driving directions:
- From your current location to Southville
- From Duncan to Southville
- Figgs
(23 miles [37 km] to the northwest)
- Clay Village
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Clay Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clay Village
- Clay Village is located in Shelby County
- Hatton
(26 miles [41.8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Hatton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Hatton
- Hatton is located in Shelby County
- Google driving directions:
- From your current location to Hatton
- From Duncan to Hatton
- Finchville
(27 miles [43.5 km] to the northwest)
- Bagdad
(28 miles [45.1 km] to the north)
- Consolation
(28 miles [45.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Consolation. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Consolation
- Consolation is located in Shelby County
- Google driving directions:
- From your current location to Consolation
- From Duncan to Consolation
- Shelbyville
(28 miles [45.1 km] to the northwest)
- Christianburg
(30 miles [48.3 km] to the north)
- Spencer County
- The following are listed by their distance from Duncan, with the one closest to Duncan listed first.
- Mount Eden
(16 miles [25.7 km] to the northwest)
- Wakefield
(19 miles [30.6 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Wakefield. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Wakefield
- Wakefield is located in Spencer County
- Google driving directions:
- From your current location to Wakefield
- From Duncan to Wakefield
- Little Mount
(20 miles [32.2 km] to the northwest)
- Taylorsville
(22 miles [35.4 km] to the northwest)
- Yoder
(24 miles [38.6 km] to the northwest)
- Normandy
(25 miles [40.2 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Normandy. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Normandy
- Normandy is located in Spencer County
- Google driving directions:
- From your current location to Normandy
- From Duncan to Normandy
- Washington County
- The following are listed by their distance from Duncan, with the one closest to Duncan listed first.
- Seaville
(3 miles [4.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Seaville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Seaville
- Seaville is located in Washington County
- Google driving directions:
- From your current location to Seaville
- From Duncan to Seaville
- Sharpsville
(4 miles [6.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Sharpsville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Sharpsville
- Sharpsville is located in Washington County
- Google driving directions:
- From your current location to Sharpsville
- From Duncan to Sharpsville
- Tatham Springs
(7 miles [11.3 km] to the west)
- Willisburg
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Willisburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willisburg
- Willisburg is located in Washington County
- Population from the 2020 Census: 282 people
- Jump to TripAdvisor's Tourism page for Willisburg <3>
- Jenkinsville
(8 miles [12.9 km] to the south)
- Mackville
(8 miles [12.9 km] to the southwest)
- Pulliam
(8 miles [12.9 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Pulliam. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Pulliam
- Pulliam is located in Washington County
- Google driving directions:
- From your current location to Pulliam
- From Duncan to Pulliam
- Brush Grove
(10 miles [16.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Brush Grove. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Brush Grove
- Brush Grove is located in Washington County
- Google driving directions:
- From your current location to Brush Grove
- From Duncan to Brush Grove
- Thompsonville
(11 miles [17.7 km] to the southwest)
- Litsey
(12 miles [19.3 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Litsey. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Litsey
- Litsey is located in Washington County
- Google driving directions:
- From your current location to Litsey
- From Duncan to Litsey
- Mooresville
(15 miles [24.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Mooresville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Mooresville
- Mooresville is located in Washington County
- Google driving directions:
- From your current location to Mooresville
- From Duncan to Mooresville
- Springfield
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Springfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springfield
- Springfield is located in Washington County
- Population from the 2020 Census: 2,987 people
- Jump to TripAdvisor's Tourism page for Springfield <3>
- Woodford County
- The following are listed by their distance from Duncan, with the one closest to Duncan listed first.
- Mundys Landing
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Mundys Landing have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mundys Landing
- Mundys Landing is located in Woodford County
- Nonesuch
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Nonesuch have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nonesuch
- Nonesuch is located in Woodford County
- Mortonsville
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Mortonsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mortonsville
- Mortonsville is located in Woodford County
- Milner
(16 miles [25.7 km] to the northeast)
- Clifton
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Clifton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clifton
- Clifton is located in Woodford County
- Pinckard
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Pinckard have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pinckard
- Pinckard is located in Woodford County
- Versailles
(19 miles [30.6 km] to the northeast)
- Woodford Village
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Woodford Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodford Village
- Woodford Village is located in Woodford County
- Hunter Town
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Hunter Town have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hunter Town
- Hunter Town is located in Woodford County
- Firmantown
(21 miles [33.8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Firmantown. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Firmantown
- Firmantown is located in Woodford County
- Google driving directions:
- From your current location to Firmantown
- From Duncan to Firmantown
- Millville
(21 miles [33.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Millville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millville
- Millville is located in Woodford County
- Bonita
(22 miles [35.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Bonita. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Bonita
- Bonita is located in Woodford County
- Google driving directions:
- From your current location to Bonita
- From Duncan to Bonita
For an expanded list of the communities that are closest to Duncan, see our County-by-County Page for Duncan.
Cemeteries Near Duncan ...
Below are cemeteries that are in the vicinity of Duncan.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Duncan covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Duncan, with the one closest to Duncan listed first.
- Grapevine Christian Church Cemetery
(Less than 2 miles to the south)
- Bethel Cemetery
(Less than 2 miles to the northwest)
- Jump to our Gazetteer entry for the Bethel Cemetery
- Note: The GPS coordinates that we are using for the Bethel Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Royalty Cemetery
(2 miles [3.2 km] to the west)
- Jump to our Gazetteer entry for the Royalty Cemetery
- Note: The GPS coordinates that we are using for the Royalty Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Masters Cemetery
(2 miles [3.2 km] to the southwest)
- Jump to our Gazetteer entry for the Masters Cemetery
- Note: The GPS coordinates that we are using for the Masters Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Mt. Hebron Cemetery
(2 miles [3.2 km] to the north)
- Jump to our Gazetteer entry for the Mt. Hebron Cemetery
- Note: The GPS coordinates that we are using for the Mt. Hebron Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Salzman Cemetery
(3 miles [4.8 km] to the southwest)
- Jump to our Gazetteer entry for the Salzman Cemetery
- Note: The GPS coordinates that we are using for the Salzman Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Mayo Church Cemetery
(3 miles [4.8 km] to the northeast)
- Jump to our Gazetteer entry for the Mayo Church Cemetery
- Note: The GPS coordinates that we are using for the Mayo Church Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Darnell Cemetery
(3 miles [4.8 km] to the northwest)
- Jump to our Gazetteer entry for the Darnell Cemetery
- Note: The GPS coordinates that we are using for the Darnell Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Stine Cemetery
(3 miles [4.8 km] to the northwest)
- Jump to our Gazetteer entry for the Stine Cemetery
- Note: The GPS coordinates that we are using for the Stine Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Sea Cemetery
(3 miles [4.8 km] to the west)
- Jump to our Gazetteer entry for the Sea Cemetery
- Note: The GPS coordinates that we are using for the Sea Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Perkins Cemetery
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for the Perkins Cemetery
- Note: The GPS coordinates that we are using for the Perkins Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Adkinson Cemetery
(4 miles [6.4 km] to the south)
- Jump to our Gazetteer entry for the Adkinson Cemetery
- Note: The GPS coordinates that we are using for the Adkinson Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Continue List (229 more) ...
- Rose Grove Cemetery
(4 miles [6.4 km] to the south)
- Jump to our Gazetteer entry for the Rose Grove Cemetery
- Note: The GPS coordinates that we are using for the Rose Grove Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Royalty Cemetery
(4 miles [6.4 km] to the southeast)
- Hopewell Church Cemetery
(4 miles [6.4 km] to the east)
- Jump to our Gazetteer entry for the Hopewell Church Cemetery
- Note: The GPS coordinates that we are using for the Hopewell Church Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>
The Rand McNally Atlas shows that Duncan had a population of 175 people in 1895 with a post office and no railroad service.
These communities are listed based on their distance from Duncan, with the one closest to Duncan listed first.
- Tablow
(Less than 2 miles to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Tablow. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Tablow
- Tablow is located in Mercer County
- Google driving directions:
- From your current location to Tablow
- From Duncan to Tablow
- Cardwell
(2 miles [3.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Cardwell have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cardwell
- Cardwell is located in Washington County
- Cornishville
(3 miles [4.8 km] to the south)
- Note: The GPS coordinates that we are using for Cornishville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cornishville
- Cornishville is located in Mercer County
- Mayo
(3 miles [4.8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Mayo. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Mayo
- Mayo is located in Mercer County
- Google driving directions:
- From your current location to Mayo
- From Duncan to Mayo
- Seaville
(3 miles [4.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Seaville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Seaville
- Seaville is located in Washington County
- Google driving directions:
- From your current location to Seaville
- From Duncan to Seaville
- Bohon
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Bohon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bohon
- Bohon is located in Mercer County
- Sharpsville
(4 miles [6.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Sharpsville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Sharpsville
- Sharpsville is located in Washington County
- Google driving directions:
- From your current location to Sharpsville
- From Duncan to Sharpsville
- Kirkwood
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Kirkwood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kirkwood
- Kirkwood is located in Mercer County
- Talmage
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Talmage have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Talmage
- Talmage is located in Mercer County
- Ashbrook
(6 miles [9.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Ashbrook. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Ashbrook
- Ashbrook is located in Anderson County
- Google driving directions:
- From your current location to Ashbrook
- From Duncan to Ashbrook
- Vanarsdell
(6 miles [9.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Vanarsdell. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Vanarsdell
- Vanarsdell is located in Mercer County
- Google driving directions:
- From your current location to Vanarsdell
- From Duncan to Vanarsdell
- Willisburg
(7 miles [11.3 km] to the west)
- Note: The GPS coordinates that we are using for Willisburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willisburg
- Willisburg is located in Washington County
- Population from the 2020 Census: 282 people
- Jump to TripAdvisor's Tourism page for Willisburg <3>
- Continue List (15 more) ...
- Sinai
(7 miles [11.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Sinai. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Sinai
- Sinai is located in Anderson County
- Google driving directions:
- From your current location to Sinai
- From Duncan to Sinai
- McAfee
(7 miles [11.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for McAfee. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for McAfee
- McAfee is located in Mercer County
- Google driving directions:
- From your current location to McAfee
- From Duncan to McAfee
- Mackville
(8 miles [12.9 km] to the southwest)
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Duncan. See our List of 1890's Communities around Duncan.
Newspapers Published in Duncan ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 67 newspapers that have been published in the area around Duncan.
Although we're unaware of any newspapers that were published in the immediate area of Duncan, there are papers which were published within 20 miles [32.2 km]<4>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Duncan.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Duncan:
- Websites specific to Kentucky
- Pages specific to Mercer County
- Genealogy information for nearby counties
- Anderson County
- Boyle County
- Casey County
- Fayette County
- Franklin County
- Garrard County
- Jessamine County
- Lawrence County
- Lincoln County
- Madison County
- Marion County
- Montgomery County
- Nelson County
- Scott County
- Shelby County
- Spencer County
- Washington County
- Woodford County
- Cemetery Information and Directories for Kentucky
Off-the-Road Links ...
Unfortunately, we don't know of a website for Duncan. If you can help, please contact us through our Feedback Page. The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Duncan) to Point B.Our distance measurements begin at a specific point in Duncan. The point we use is located at these GPS coordinates - Latitude: 37.8494, Longitude: -84.9902 In this case, the coordinates for Duncan have been provided by the Geographic Names Information System (GNIS). |
<5> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<6> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Duncan, please let us know so that we can improve our accuracy. |
|
|