RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Kentucky >> Kenton County >> Woodsdale CemeteryIndex...










Learn About
The Commemorative
Quarter for
Kentucky


The Commemorative Quarter for Kentucky







A visit to the Woodsdale Cemetery ...



Google driving directions from your current location to the Woodsdale Cemetery (Patience, this may take a moment).


Introduction ...

Note: We have organized the cemeteries in our Gazetteer based on a problem that we had while working on our own genealogy. Without specifying the cemeteries involved, we found an ancestor that we believed to have been buried in one cemetery was actually buried elsewhere.

We discovered that his burial had been refused at the last moment and the family had scrambled to make new arrangements. By looking at nearby cemeteries, the surrounding communities and in newspapers of the period, we were finally able to locate his burial site.

Should you find yourself in the same situation, we hope that our Gazetteer helps you discover your lost ancestor.

The Location of the Woodsdale Cemetery ...

We are using the following GPS coordinates (latitude and longitude) for the Woodsdale Cemetery

Lat:   38.9901°   (38° 59' 24")

Lon:   -84.5064°   (-84° 30' 23")

The Woodsdale Cemetery is located in Kenton County<1>.

The county seat for Kenton County is located in Independence. Independence lies just to the southwest of the Woodsdale Cemetery .

List of nearby cemeteries ...

Based on our list of cemeteries, we know of 20 that are within 5 miles [8 km]<2> of the Woodsdale Cemetery.<3>

We've listed the following cemeteries based on their distance from Woodsdale Cemetery, with the nearest first.

  • Wayman Cemetery
    (Less than 2 miles to the west)
    • Jump to our Gazetteer entry for the Wayman Cemetery
    • Note: The GPS coordinates that we are using for the Wayman Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.
    • The Wayman Cemetery is located in Kenton County
  • Holy Guardian Angels Cemetery
    (2 miles [3.2 km] to the northwest)
    • Jump to our Gazetteer entry for the Holy Guardian Angels Cemetery
    • Note: The GPS coordinates that we are using for the Holy Guardian Angels Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.
    • The Holy Guardian Angels Cemetery is located in Kenton County
  • Pelly Cemetery
    (2 miles [3.2 km] to the southwest)
  • Klette Cemetery
    (2 miles [3.2 km] to the south)
    • Jump to our Gazetteer entry for the Klette Cemetery
    • Note: The GPS coordinates that we are using for the Klette Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.
    • The Klette Cemetery is located in Kenton County
  • White Cemetery
    (2 miles [3.2 km] to the southeast)
    • Jump to our Gazetteer entry for the White Cemetery
    • Note: The GPS coordinates that we are using for the White Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.
    • The White Cemetery is located in Kenton County
  • Armstrong Cemetery
    (2 miles [3.2 km] to the east)
    • Jump to our Gazetteer entry for the Armstrong Cemetery
    • Note: The GPS coordinates that we are using for the Armstrong Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.
    • The Armstrong Cemetery is located in Kenton County
  • Culbertson Cemetery
    (2 miles [3.2 km] to the east)
    • Jump to our Gazetteer entry for the Culbertson Cemetery
    • Note: The GPS coordinates that we are using for the Culbertson Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.
    • The Culbertson Cemetery is located in Kenton County
  • Pruett - Mardis Cemetery
    (3 miles [4.8 km] to the southeast)
    • Jump to our Gazetteer entry for the Pruett - Mardis Cemetery
    • Note: The GPS coordinates that we are using for the Pruett - Mardis Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.
    • The Pruett - Mardis Cemetery is located in Kenton County
  • Campbell County Cemetery
    (3 miles [4.8 km] to the northeast)
    • Jump to our Gazetteer entry for the Campbell County Cemetery
    • Note: The GPS coordinates that we are using for the Campbell County Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.
    • The Campbell County Cemetery is located in Campbell County
  • Johns Hill Cemetery
    (3 miles [4.8 km] to the northeast)
    • Jump to our Gazetteer entry for the Johns Hill Cemetery
    • Note: The GPS coordinates that we are using for the Johns Hill Cemetery have been provided by the GNIS.<4> The coordinates still need to be verified.
    • The Johns Hill Cemetery is located in Campbell County
  • Mother of God Cemetery
    (4 miles [6.4 km] to the north)
  • Highland Cemetery
    (4 miles [6.4 km] to the northwest)
  • Continue List   (8 more) ...

For an expanded list with details, please visit our List of cemeteries.

List of neighboring communities ...

The following 34 communities are within Less than 2 miles<2> of the Woodsdale Cemetery.

We've listed the following communities based on their distance from Woodsdale Cemetery, with the nearest first.

  • Latonia Lakes
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for Latonia Lakes have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Latonia Lakes
    • Latonia Lakes is located in Kenton County
  • Ryland Heights
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for Ryland Heights have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ryland Heights
    • Ryland Heights is located in Kenton County
    • Population from the 2020 Census: 1,081 people
  • Fairview
    (Less than 2 miles to the northeast)
  • Taylor Mill
    (Less than 2 miles to the north)
    • Note: The GPS coordinates that we are using for Taylor Mill have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Taylor Mill
    • Taylor Mill is located in Kenton County
    • Population from the 2020 Census: 6,820 people
    • Jump to TripAdvisor's Tourism page for Taylor Mill <7>
  • Maurice
    (2 miles [3.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for Maurice have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Maurice
    • Maurice is located in Kenton County
  • Independence
    (3 miles [4.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Independence have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Independence
    • Independence is located in Kenton County
    • Population from the 2020 Census: 28,903 people
    • Jump to TripAdvisor's Tourism page for Independence <7>
  • Wilder
    (3 miles [4.8 km] to the north)
    • Note: The GPS coordinates that we are using for Wilder have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wilder
    • Wilder is located in Campbell County
    • Population from the 2020 Census: 3,061 people
    • Jump to TripAdvisor's Tourism page for Wilder <7>
  • Latonia
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for Latonia have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Latonia
    • Latonia is located in Kenton County
    • Jump to TripAdvisor's Tourism page for Latonia <7>
  • Ryland
    (4 miles [6.4 km] to the southeast)
  • Fort Wright
    (4 miles [6.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Fort Wright have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fort Wright
    • Fort Wright is located in Kenton County
    • Population from the 2020 Census: 5,779 people
    • Jump to TripAdvisor's Tourism page for Fort Wright <7>
  • Cold Spring
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Cold Spring have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cold Spring
    • Cold Spring is located in Campbell County
    • Population from the 2020 Census: 6,628 people
    • Jump to TripAdvisor's Tourism page for Cold Spring <7>
  • Fort Mitchell
    (4 miles [6.4 km] to the northwest)
  • Continue List   (22 more) ...
    • Highland Heights
      (4 miles [6.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Highland Heights have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Highland Heights
      • Highland Heights is located in Campbell County
      • Population from the 2020 Census: 7,037 people
      • Jump to TripAdvisor's Tourism page for Highland Heights <7>
    • Lakeside Park
      (4 miles [6.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Lakeside Park have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lakeside Park
      • Lakeside Park is located in Kenton County
      • Population from the 2020 Census: 2,753 people
      • Jump to TripAdvisor's Tourism page for Lakeside Park <7>
    • Crestview Hills
      (4 miles [6.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Crestview Hills have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Crestview Hills
      • Crestview Hills is located in Kenton County
      • Population from the 2020 Census: 3,333 people
      • Jump to TripAdvisor's Tourism page for Crestview Hills <7>
    • Edgewood
      (4 miles [6.4 km] to the northwest)
    • Kenton Vale
      (4 miles [6.4 km] to the north)
      • Note: The GPS coordinates that we are using for Kenton Vale have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kenton Vale
      • Kenton Vale is located in Kenton County
      • Population from the 2020 Census: 109 people
    • Park Hills
      (5 miles [8 km] to the north)
      • Note: The GPS coordinates that we are using for Park Hills have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Park Hills
      • Park Hills is located in Kenton County
      • Population from the 2020 Census: 2,995 people
      • Jump to TripAdvisor's Tourism page for Park Hills <7>
    • Crestview
      (5 miles [8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Crestview have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Crestview
      • Crestview is located in Campbell County
      • Population from the 2020 Census: 498 people
    • Crescent Springs
      (5 miles [8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Crescent Springs have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Crescent Springs
      • Crescent Springs is located in Kenton County
      • Population from the 2020 Census: 4,138 people
      • Jump to TripAdvisor's Tourism page for Crescent Springs <7>
    • Crescent Park
      (5 miles [8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Crescent Park have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Crescent Park
      • Crescent Park is located in Kenton County
    • Erlanger
      (5 miles [8 km] to the west)
    • Elsmere
      (5 miles [8 km] to the west)
      • Note: The GPS coordinates that we are using for Elsmere have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elsmere
      • Elsmere is located in Kenton County
      • Population from the 2020 Census: 8,646 people
    • Covington
      (6 miles [9.7 km] to the north)
    • Devon
      (6 miles [9.7 km] to the west)
    • Kenton Hills
      (6 miles [9.7 km] to the north)
    • Nicholson
      (6 miles [9.7 km] to the south)
    • Visalia
      (6 miles [9.7 km] to the southeast)
    • Alexandria
      (6 miles [9.7 km] to the east)
    • Bromley
      (6 miles [9.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Bromley have been provided by the GNIS.<4> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bromley
      • Bromley is located in Kenton County
      • Population from the 2020 Census: 799 people
    • Silver Grove
      (6 miles [9.7 km] to the northeast)
    • Fort Thomas
      (6 miles [9.7 km] to the northeast)
    • Southgate
      (6 miles [9.7 km] to the north)
    • Florence
      (6 miles [9.7 km] to the west)

For the full list of neighboring communities with details, please visit our extended List of Communities.

Nearby communities with newspapers ...

The following communities are those where newspapers have been published and are located in the vicinity of the Woodsdale Cemetery. Unless otherwise noted, the following communities are located in Kenton County.

More information can be found on our list of Local Newspapers for The Woodsdale Cemetery.

We've listed the following communities alphabetically.

Websites to help with your research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their websites are open to everyone.

To help you get started, the following links will take you to the pages that might help with the Woodsdale Cemetery:





 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 18 Feb 2025