|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Pruett - Mardis Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Pruett - Mardis Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Pruett - Mardis Cemetery. We've listed the following communities based on their distance, with the closest first.
- Ryland
(Less than 2 miles to the southeast)
- Jump to our Gazetteer entry for Ryland
- Ryland is located in Kenton County
- Latonia Lakes
(Less than 2 miles to the north)
- Note: The GPS coordinates that we are using for Latonia Lakes have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Latonia Lakes
- Latonia Lakes is located in Kenton County
- Visalia
(2 miles [3.2 km] to the southeast)
- Jump to our Gazetteer entry for Visalia
- Visalia is located in Kenton County
- Ryland Heights
(2 miles [3.2 km] to the north)
- Note: The GPS coordinates that we are using for Ryland Heights have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ryland Heights
- Ryland Heights is located in Kenton County
- Population from the 2020 Census: 1,081 people
- Fairview
(3 miles [4.8 km] to the north)
- Jump to our Gazetteer entry for Fairview
- Fairview is located in Kenton County
- Population from the 2020 Census: 143 people
- Independence
(3 miles [4.8 km] to the west)
- Note: The GPS coordinates that we are using for Independence have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Independence
- Independence is located in Kenton County
- Population from the 2020 Census: 28,903 people
- Jump to TripAdvisor's Tourism page for Independence <3>
- Taylor Mill
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Taylor Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Taylor Mill
- Taylor Mill is located in Kenton County
- Population from the 2020 Census: 6,820 people
- Jump to TripAdvisor's Tourism page for Taylor Mill <3>
- Nicholson
(4 miles [6.4 km] to the southwest)
- Jump to our Gazetteer entry for Nicholson
- Nicholson is located in Kenton County
- White Villa
(4 miles [6.4 km] to the south)
- Jump to our Gazetteer entry for White Villa
- White Villa is located in Kenton County
- Claryville
(4 miles [6.4 km] to the east)
- Jump to our Gazetteer entry for Claryville
- Claryville is located in Campbell County
- Kenton
(5 miles [8 km] to the south)
- Jump to our Gazetteer entry for Kenton
- Kenton is located in Kenton County
- Alexandria
(5 miles [8 km] to the east)
- Maurice
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Maurice have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maurice
- Maurice is located in Kenton County
- Cold Spring
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Cold Spring have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cold Spring
- Cold Spring is located in Campbell County
- Population from the 2020 Census: 6,628 people
- Jump to TripAdvisor's Tourism page for Cold Spring <3>
- Crestview
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Crestview have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crestview
- Crestview is located in Campbell County
- Population from the 2020 Census: 498 people
- Highland Heights
(6 miles [9.7 km] to the north)
- Wilder
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Wilder have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilder
- Wilder is located in Campbell County
- Population from the 2020 Census: 3,061 people
- Jump to TripAdvisor's Tourism page for Wilder <3>
- Richwood
(7 miles [11.3 km] to the west)
- Kensington
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Kensington have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kensington
- Kensington is located in Boone County
- Latonia
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Latonia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Latonia
- Latonia is located in Kenton County
- Jump to TripAdvisor's Tourism page for Latonia <3>
- Kenton Vale
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Kenton Vale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kenton Vale
- Kenton Vale is located in Kenton County
- Population from the 2020 Census: 109 people
- Grants Lick
(7 miles [11.3 km] to the southeast)
- Jump to our Gazetteer entry for Grants Lick
- Grants Lick is located in Campbell County
- Fort Wright
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Fort Wright have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Wright
- Fort Wright is located in Kenton County
- Population from the 2020 Census: 5,779 people
- Jump to TripAdvisor's Tourism page for Fort Wright <3>
- Camp Springs
(7 miles [11.3 km] to the northeast)
- Jump to our Gazetteer entry for Camp Springs
- Camp Springs is located in Campbell County
- Silver Grove
(7 miles [11.3 km] to the northeast)
- Lakeside Park
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Lakeside Park have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lakeside Park
- Lakeside Park is located in Kenton County
- Population from the 2020 Census: 2,753 people
- Jump to TripAdvisor's Tourism page for Lakeside Park <3>
- Crestview Hills
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Crestview Hills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crestview Hills
- Crestview Hills is located in Kenton County
- Population from the 2020 Census: 3,333 people
- Jump to TripAdvisor's Tourism page for Crestview Hills <3>
- Edgewood
(7 miles [11.3 km] to the northwest)
- Elsmere
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Elsmere have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elsmere
- Elsmere is located in Kenton County
- Population from the 2020 Census: 8,646 people
- Devon
(7 miles [11.3 km] to the west)
- Jump to our Gazetteer entry for Devon
- Devon is located in Boone County
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Pruett - Mardis Cemetery. The point we use is located at these GPS coordinates - Latitude: 38.9464, Longitude: -84.4817 In this case, the coordinates for the Pruett - Mardis Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|