Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Pelly Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Pelly Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Pelly Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Independence
(Less than 2 miles to the southwest)- Note: The GPS coordinates that we are using for Independence have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Independence
- Independence is located in Kenton County
- Population from the 2020 Census: 28,903 people
- Jump to TripAdvisor's Tourism page for Independence <3>
- Latonia Lakes
(2 miles [3.2 km] to the east)- Note: The GPS coordinates that we are using for Latonia Lakes have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Latonia Lakes
- Latonia Lakes is located in Kenton County
- Nicholson
(3 miles [4.8 km] to the south)- Jump to our Gazetteer entry for Nicholson
- Nicholson is located in Kenton County
- Ryland
(3 miles [4.8 km] to the southeast)- Jump to our Gazetteer entry for Ryland
- Ryland is located in Kenton County
- Ryland Heights
(3 miles [4.8 km] to the northeast)- Note: The GPS coordinates that we are using for Ryland Heights have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ryland Heights
- Ryland Heights is located in Kenton County
- Population from the 2020 Census: 1,081 people
- Fairview
(3 miles [4.8 km] to the northeast)- Jump to our Gazetteer entry for Fairview
- Fairview is located in Kenton County
- Population from the 2020 Census: 143 people
- Taylor Mill
(3 miles [4.8 km] to the northeast)- Note: The GPS coordinates that we are using for Taylor Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Taylor Mill
- Taylor Mill is located in Kenton County
- Population from the 2020 Census: 6,820 people
- Jump to TripAdvisor's Tourism page for Taylor Mill <3>
- Crestview Hills
(4 miles [6.4 km] to the northwest)- Note: The GPS coordinates that we are using for Crestview Hills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crestview Hills
- Crestview Hills is located in Kenton County
- Population from the 2020 Census: 3,333 people
- Jump to TripAdvisor's Tourism page for Crestview Hills <3>
- Edgewood
(4 miles [6.4 km] to the northwest)- Jump to our Gazetteer entry for Edgewood
- Edgewood is located in Kenton County
- Population from the 2020 Census: 8,779 people
- Jump to TripAdvisor's Tourism page for Edgewood <3>
- Elsmere
(4 miles [6.4 km] to the northwest) - Devon
(4 miles [6.4 km] to the west)- Jump to our Gazetteer entry for Devon
- Devon is located in Boone County
- Richwood
(5 miles [8 km] to the southwest)- Jump to our Gazetteer entry for Richwood
- Richwood is located in Boone County
- Jump to TripAdvisor's Tourism page for Richwood <3>
- Kensington
(5 miles [8 km] to the southwest)- Note: The GPS coordinates that we are using for Kensington have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kensington
- Kensington is located in Boone County
- Lakeside Park
(5 miles [8 km] to the north)- Note: The GPS coordinates that we are using for Lakeside Park have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lakeside Park
- Lakeside Park is located in Kenton County
- Population from the 2020 Census: 2,753 people
- Jump to TripAdvisor's Tourism page for Lakeside Park <3>
- Visalia
(5 miles [8 km] to the southeast)- Jump to our Gazetteer entry for Visalia
- Visalia is located in Kenton County
- Fort Wright
(5 miles [8 km] to the north)- Note: The GPS coordinates that we are using for Fort Wright have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Wright
- Fort Wright is located in Kenton County
- Population from the 2020 Census: 5,779 people
- Jump to TripAdvisor's Tourism page for Fort Wright <3>
- Erlanger
(5 miles [8 km] to the northwest)- Jump to our Gazetteer entry for Erlanger
- Erlanger is located in Kenton County
- Population from the 2020 Census: 19,393 people
- Jump to TripAdvisor's Tourism page for Erlanger <3>
- Florence
(5 miles [8 km] to the northwest)- Jump to our Gazetteer entry for Florence
- Florence is located in Boone County
- Population from the 2020 Census: 33,423 people
- Jump to TripAdvisor's Tourism page for Florence <3>
- Fort Mitchell
(6 miles [9.7 km] to the north)- Jump to our Gazetteer entry for Fort Mitchell
- Fort Mitchell is located in Kenton County
- Population from the 2020 Census: 8,263 people
- Jump to TripAdvisor's Tourism page for Fort Mitchell <3>
- Crescent Park
(6 miles [9.7 km] to the northwest)- Note: The GPS coordinates that we are using for Crescent Park have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crescent Park
- Crescent Park is located in Kenton County
- Cold Spring
(6 miles [9.7 km] to the northeast)- Note: The GPS coordinates that we are using for Cold Spring have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cold Spring
- Cold Spring is located in Campbell County
- Population from the 2020 Census: 6,628 people
- Jump to TripAdvisor's Tourism page for Cold Spring <3>
- Highland Heights
(6 miles [9.7 km] to the northeast)- Note: The GPS coordinates that we are using for Highland Heights have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Highland Heights
- Highland Heights is located in Campbell County
- Population from the 2020 Census: 7,037 people
- Jump to TripAdvisor's Tourism page for Highland Heights <3>
- Wilder
(6 miles [9.7 km] to the northeast)- Note: The GPS coordinates that we are using for Wilder have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilder
- Wilder is located in Campbell County
- Population from the 2020 Census: 3,061 people
- Jump to TripAdvisor's Tourism page for Wilder <3>
- Latonia
(6 miles [9.7 km] to the north)- Note: The GPS coordinates that we are using for Latonia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Latonia
- Latonia is located in Kenton County
- Jump to TripAdvisor's Tourism page for Latonia <3>
- Kenton Vale
(6 miles [9.7 km] to the north)- Note: The GPS coordinates that we are using for Kenton Vale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kenton Vale
- Kenton Vale is located in Kenton County
- Population from the 2020 Census: 109 people
Off-the-Road Links ...
The official website for Kenton County: www.kentoncounty.org/
The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Pelly Cemetery. The point we use is located at these GPS coordinates - Latitude: 38.9611, Longitude: -84.5294 |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |