|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Armstrong Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Armstrong Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Armstrong Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Ryland Heights
(Less than 2 miles to the southwest)
- Note: The GPS coordinates that we are using for Ryland Heights have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ryland Heights
- Ryland Heights is located in Kenton County
- Population from the 2020 Census: 1,081 people
- Latonia Lakes
(Less than 2 miles to the southwest)
- Note: The GPS coordinates that we are using for Latonia Lakes have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Latonia Lakes
- Latonia Lakes is located in Kenton County
- Fairview
(Less than 2 miles to the northwest)
- Jump to our Gazetteer entry for Fairview
- Fairview is located in Kenton County
- Population from the 2020 Census: 143 people
- Ryland
(2 miles [3.2 km] to the south)
- Jump to our Gazetteer entry for Ryland
- Ryland is located in Kenton County
- Cold Spring
(2 miles [3.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Cold Spring have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cold Spring
- Cold Spring is located in Campbell County
- Population from the 2020 Census: 6,628 people
- Jump to TripAdvisor's Tourism page for Cold Spring <3>
- Taylor Mill
(2 miles [3.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Taylor Mill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Taylor Mill
- Taylor Mill is located in Kenton County
- Population from the 2020 Census: 6,820 people
- Jump to TripAdvisor's Tourism page for Taylor Mill <3>
- Highland Heights
(3 miles [4.8 km] to the north)
- Note: The GPS coordinates that we are using for Highland Heights have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Highland Heights
- Highland Heights is located in Campbell County
- Population from the 2020 Census: 7,037 people
- Jump to TripAdvisor's Tourism page for Highland Heights <3>
- Independence
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Independence have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Independence
- Independence is located in Kenton County
- Population from the 2020 Census: 28,903 people
- Jump to TripAdvisor's Tourism page for Independence <3>
- Visalia
(4 miles [6.4 km] to the south)
- Jump to our Gazetteer entry for Visalia
- Visalia is located in Kenton County
- Alexandria
(4 miles [6.4 km] to the east)
- Crestview
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Crestview have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crestview
- Crestview is located in Campbell County
- Population from the 2020 Census: 498 people
- Wilder
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Wilder have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wilder
- Wilder is located in Campbell County
- Population from the 2020 Census: 3,061 people
- Jump to TripAdvisor's Tourism page for Wilder <3>
- Claryville
(5 miles [8 km] to the southeast)
- Jump to our Gazetteer entry for Claryville
- Claryville is located in Campbell County
- Latonia
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Latonia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Latonia
- Latonia is located in Kenton County
- Jump to TripAdvisor's Tourism page for Latonia <3>
- Camp Springs
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for Camp Springs
- Camp Springs is located in Campbell County
- Kenton Vale
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Kenton Vale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kenton Vale
- Kenton Vale is located in Kenton County
- Population from the 2020 Census: 109 people
- Silver Grove
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Silver Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Silver Grove
- Silver Grove is located in Campbell County
- Population from the 2020 Census: 1,198 people
- Jump to TripAdvisor's Tourism page for Silver Grove <3>
- Fort Wright
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Fort Wright have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Wright
- Fort Wright is located in Kenton County
- Population from the 2020 Census: 5,779 people
- Jump to TripAdvisor's Tourism page for Fort Wright <3>
- Nicholson
(6 miles [9.7 km] to the southwest)
- Jump to our Gazetteer entry for Nicholson
- Nicholson is located in Kenton County
- Covington
(6 miles [9.7 km] to the north)
- Southgate
(6 miles [9.7 km] to the north)
- Park Hills
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Park Hills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Park Hills
- Park Hills is located in Kenton County
- Population from the 2020 Census: 2,995 people
- Jump to TripAdvisor's Tourism page for Park Hills <3>
- Melbourne
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Melbourne have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Melbourne
- Melbourne is located in Campbell County
- Population from the 2020 Census: 487 people
- Jump to TripAdvisor's Tourism page for Melbourne <3>
- Fort Thomas
(6 miles [9.7 km] to the north)
- Fort Mitchell
(6 miles [9.7 km] to the northwest)
- Lakeside Park
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Lakeside Park have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lakeside Park
- Lakeside Park is located in Kenton County
- Population from the 2020 Census: 2,753 people
- Jump to TripAdvisor's Tourism page for Lakeside Park <3>
- Crestview Hills
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Crestview Hills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crestview Hills
- Crestview Hills is located in Kenton County
- Population from the 2020 Census: 3,333 people
- Jump to TripAdvisor's Tourism page for Crestview Hills <3>
- Edgewood
(6 miles [9.7 km] to the west)
Off-the-Road Links ...
The official website for Kenton County: www.kentoncounty.org/ The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Armstrong Cemetery. The point we use is located at these GPS coordinates - Latitude: 38.9817, Longitude: -84.4697 In this case, the coordinates for the Armstrong Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|