|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Canby had a post office and no railroad service.
The following communities are listed based on their distance from Canby, with the one closest to Canby listed first.
- Keefer
(Less than 2 miles to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Keefer. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Keefer
- Keefer is located in Grant County
- Google driving directions:
- From your current location to Keefer
- From Canby to Keefer
- Lawrenceville
(3 miles [4.8 km] to the north)
- Breck
(4 miles [6.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Breck. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Breck
- Breck is located in Owen County
- Google driving directions:
- From your current location to Breck
- From Canby to Breck
- New Columbus
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for New Columbus have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Columbus
- New Columbus is located in Owen County
- Blanchet
(4 miles [6.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Blanchet. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Blanchet
- Blanchet is located in Grant County
- Google driving directions:
- From your current location to Blanchet
- From Canby to Blanchet
- Corinth
(5 miles [8 km] to the east)
- Holbrook
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Holbrook have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holbrook
- Holbrook is located in Grant County
- Mason
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Mason have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mason
- Mason is located in Grant County
- Heekin
(6 miles [9.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Heekin. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Heekin
- Heekin is located in Grant County
- Google driving directions:
- From your current location to Heekin
- From Canby to Heekin
- Sweet Owen
(6 miles [9.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Sweet Owen. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Sweet Owen
- Sweet Owen is located in Owen County
- Google driving directions:
- From your current location to Sweet Owen
- From Canby to Sweet Owen
- Hesler
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Hesler have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hesler
- Hesler is located in Owen County
- Rockdale
(7 miles [11.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Rockdale. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Rockdale
- Rockdale is located in Owen County
- Google driving directions:
- From your current location to Rockdale
- From Canby to Rockdale
- Stonewall
(7 miles [11.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Stonewall. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Stonewall
- Stonewall is located in Scott County
- Google driving directions:
- From your current location to Stonewall
- From Canby to Stonewall
- Cherry Grove
(7 miles [11.3 km] to the northeast)
- Hallam
(7 miles [11.3 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Hallam. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Hallam
- Hallam is located in Owen County
- Google driving directions:
- From your current location to Hallam
- From Canby to Hallam
- Beechwood
(8 miles [12.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Beechwood. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Beechwood
- Beechwood is located in Owen County
- Google driving directions:
- From your current location to Beechwood
- From Canby to Beechwood
- Josephine
(8 miles [12.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Josephine. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Josephine
- Josephine is located in Scott County
- Google driving directions:
- From your current location to Josephine
- From Canby to Josephine
- Cordova
(8 miles [12.9 km] to the east)
- Stewartsville
(8 miles [12.9 km] to the north)
- Downingsville
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Downingsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Downingsville
- Downingsville is located in Grant County
- Porter
(9 miles [14.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Porter. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Porter
- Porter is located in Scott County
- Google driving directions:
- From your current location to Porter
- From Canby to Porter
- Williamstown
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Williamstown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williamstown
- Williamstown is located in Grant County
- Population from the 2020 Census: 3,939 people
- Jump to TripAdvisor's Tourism page for Williamstown <4>
- Delia
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Delia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Delia
- Delia is located in Grant County
- Owenton
(9 miles [14.5 km] to the west)
- Sadieville
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Sadieville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sadieville
- Sadieville is located in Scott County
- Population from the 2020 Census: 371 people
Off-the-Road Links ...
The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Canby, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|