Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Campbellsville (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Campbellsville. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southeast corner of their home county. During their lives, most hospitals and doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the east contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Campbellsville is located in Taylor County and is the County Seat.
To see how the shape of Kentucky's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Taylor County: Adair, Casey, Green, Larue & Marion.
Below are the counties that are near Campbellsville. For each of these counties, we show a sample of those communities that are closest to Campbellsville:
- Taylor County (The home county of Campbellsville)
- The following are listed by their distance from Campbellsville, with the one closest to Campbellsville listed first.
- Elk Horn
(3 miles [4.8 km] to the southeast)
- Wright's
(3 miles [4.8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Wright's. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Wright's
- Wright's is located in Taylor County
- Google driving directions:
- From your current location to Wright's
- From Campbellsville to Wright's
- Acton
(5 miles [8 km] to the east)
- Saloma
(5 miles [8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Saloma. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Saloma
- Saloma is located in Taylor County
- Google driving directions:
- From your current location to Saloma
- From Campbellsville to Saloma
- Bengal
(6 miles [9.7 km] to the west)
- Mannsville
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Mannsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mannsville
- Mannsville is located in Taylor County
- Maple
(12 miles [19.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Maple. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Maple
- Maple is located in Taylor County
- Google driving directions:
- From your current location to Maple
- From Campbellsville to Maple
- Adair County
- The following are listed by their distance from Campbellsville, with the one closest to Campbellsville listed first.
- Speck
(8 miles [12.9 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Speck. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Speck
- Speck is located in Adair County
- Google driving directions:
- From your current location to Speck
- From Campbellsville to Speck
- Feathersburg
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Feathersburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Feathersburg
- Feathersburg is located in Adair County
- Coburg
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Coburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coburg
- Coburg is located in Adair County
- Kellyville
(10 miles [16.1 km] to the south)
- Holmes
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Holmes have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Holmes
- Holmes is located in Adair County
- Knifley
(10 miles [16.1 km] to the southeast)
- Cane Valley
(11 miles [17.7 km] to the south)
- Casey Creek
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Casey Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Casey Creek
- Casey Creek is located in Adair County
- Absher
(12 miles [19.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Absher. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Absher
- Absher is located in Adair County
- Google driving directions:
- From your current location to Absher
- From Campbellsville to Absher
- Dunbar Hill
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Dunbar Hill have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dunbar Hill
- Dunbar Hill is located in Adair County
- Barnett Springs
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Barnett Springs have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barnett Springs
- Barnett Springs is located in Adair County
- Christine
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Christine have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Christine
- Christine is located in Adair County
- Kemp
(15 miles [24.1 km] to the southwest)
- Barren County
- The following are listed by their distance from Campbellsville, with the one closest to Campbellsville listed first.
- Park
(27 miles [43.5 km] to the southwest)
- Hiseville
(30 miles [48.3 km] to the southwest)
- Boyle County
- The following are listed by their distance from Campbellsville, with the one closest to Campbellsville listed first.
- Aliceton
(24 miles [38.6 km] to the northeast)
- Forkland
(24 miles [38.6 km] to the northeast)
- Brumfield
(26 miles [41.8 km] to the northeast)
- Craintown
(26 miles [41.8 km] to the northeast)
- Mitchellsburg
(27 miles [43.5 km] to the northeast)
- Parksville
(30 miles [48.3 km] to the northeast)
- Perryville
(30 miles [48.3 km] to the northeast)
- Wilsonville
(30 miles [48.3 km] to the northeast)
- Casey County
- The following are listed by their distance from Campbellsville, with the one closest to Campbellsville listed first.
- Atterson
(14 miles [22.5 km] to the east)
- Creston
(17 miles [27.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Creston. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Creston
- Creston is located in Casey County
- Google driving directions:
- From your current location to Creston
- From Campbellsville to Creston
- Rheber
(18 miles [29 km] to the east)
- Dunnville
(20 miles [32.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Dunnville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dunnville
- Dunnville is located in Casey County
- Evans Ford
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Evans Ford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Evans Ford
- Evans Ford is located in Casey County
- Rubert Ford
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Rubert Ford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rubert Ford
- Rubert Ford is located in Casey County
- Liberty
(22 miles [35.4 km] to the east)
- Phil
(23 miles [37 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Phil. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Phil
- Phil is located in Casey County
- Google driving directions:
- From your current location to Phil
- From Campbellsville to Phil
- Cantown
(24 miles [38.6 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Cantown. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Cantown
- Cantown is located in Casey County
- Google driving directions:
- From your current location to Cantown
- From Campbellsville to Cantown
- Labascus
(24 miles [38.6 km] to the east)
- Teddy
(24 miles [38.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Teddy have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Teddy
- Teddy is located in Casey County
- Evona
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Evona have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Evona
- Evona is located in Casey County
- Honey Acre
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Honey Acre have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Honey Acre
- Honey Acre is located in Casey County
- Green County
- The following are listed by their distance from Campbellsville, with the one closest to Campbellsville listed first.
- Roachville
(8 miles [12.9 km] to the southwest)
- Greensburg
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Greensburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greensburg
- Greensburg is located in Green County
- Population from the 2020 Census: 2,057 people
- Jump to TripAdvisor's Tourism page for Greensburg <2>
- Summersville
(11 miles [17.7 km] to the west)
- Gabe
(12 miles [19.3 km] to the west)
- Allendale
(13 miles [20.9 km] to the west)
- Exie
(16 miles [25.7 km] to the southwest)
- Liletown
(18 miles [29 km] to the southwest)
- Hart County
- The following are listed by their distance from Campbellsville, with the one closest to Campbellsville listed first.
- Pascal
(22 miles [35.4 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Pascal. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Pascal
- Pascal is located in Hart County
- Google driving directions:
- From your current location to Pascal
- From Campbellsville to Pascal
- Canmer
(23 miles [37 km] to the west)
- Rio
(23 miles [37 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Rio. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Rio
- Rio is located in Hart County
- Google driving directions:
- From your current location to Rio
- From Campbellsville to Rio
- Three Springs
(24 miles [38.6 km] to the southwest)
- Hammonville
(25 miles [40.2 km] to the west)
- Hardyville
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Hardyville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hardyville
- Hardyville is located in Hart County
- Bunnell Crossing
(26 miles [41.8 km] to the west)
- Bonnieville
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Bonnieville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bonnieville
- Bonnieville is located in Hart County
- Population from the 2020 Census: 260 people
- Jump to TripAdvisor's Tourism page for Bonnieville <2>
- Munfordville
(30 miles [48.3 km] to the west)
- Note: The GPS coordinates that we are using for Munfordville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Munfordville
- Munfordville is located in Hart County
- Population from the 2020 Census: 1,660 people
- Jump to TripAdvisor's Tourism page for Munfordville <2>
- Larue County
- The following are listed by their distance from Campbellsville, with the one closest to Campbellsville listed first.
- Gleanings
(18 miles [29 km] to the northwest)
- Mount Sherman
(19 miles [30.6 km] to the northwest)
- Buffalo
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Buffalo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buffalo
- Buffalo is located in Larue County
- Magnolia
(23 miles [37 km] to the west)
- White City ‑ Historic
(24 miles [38.6 km] to the northwest)
- Note: The GPS coordinates that we are using for White City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White City
- White City is located in Larue County
- Hodgenville
(26 miles [41.8 km] to the northwest)
- Roanoke
(30 miles [48.3 km] to the northwest)
- Tonieville
(30 miles [48.3 km] to the northwest)
- Lincoln County
- The following are listed by their distance from Campbellsville, with the one closest to Campbellsville listed first.
- Hustonville
(30 miles [48.3 km] to the east)
- Note: The GPS coordinates that we are using for Hustonville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hustonville
- Hustonville is located in Lincoln County
- Population from the 2020 Census: 368 people
- Jump to TripAdvisor's Tourism page for Hustonville <2>
- Mount Salem
(30 miles [48.3 km] to the east)
- Marion County
- The following are listed by their distance from Campbellsville, with the one closest to Campbellsville listed first.
- Phillipsburg
(8 miles [12.9 km] to the northeast)
- Jessietown
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Jessietown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jessietown
- Jessietown is located in Marion County
- Salleetown
(10 miles [16.1 km] to the northeast)
- New Market
(11 miles [17.7 km] to the north)
- Calvary
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Calvary have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Calvary
- Calvary is located in Marion County
- Saint Joseph
(12 miles [19.3 km] to the north)
- Greenbriar
(12 miles [19.3 km] to the northeast)
- Peck Ford
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Peck Ford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Peck Ford
- Peck Ford is located in Marion County
- Belltown
(13 miles [20.9 km] to the north)
- Raywick
(15 miles [24.1 km] to the north)
- Bradfordsville
(15 miles [24.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Bradfordsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bradfordsville
- Bradfordsville is located in Marion County
- Population from the 2020 Census: 299 people
- Jump to TripAdvisor's Tourism page for Bradfordsville <2>
- Lebanon
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Lebanon have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lebanon
- Lebanon is located in Marion County
- Population from the 2020 Census: 5,733 people
- Jump to TripAdvisor's Tourism page for Lebanon <2>
- Saint Mary
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Saint Mary have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Mary
- Saint Mary is located in Marion County
- Jump to TripAdvisor's Tourism page for Saint Mary <2>
- Mercer County
- Stewart
(30 miles [48.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Stewart. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Stewart
- Stewart is located in Mercer County
- Google driving directions:
- From your current location to Stewart
- From Campbellsville to Stewart
- Metcalfe County
- The following are listed by their distance from Campbellsville, with the one closest to Campbellsville listed first.
- Center
(23 miles [37 km] to the southwest)
- Knob Lick
(26 miles [41.8 km] to the southwest)
- Edmonton
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Edmonton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edmonton
- Edmonton is located in Metcalfe County
- Population from the 2020 Census: 1,597 people
- Jump to TripAdvisor's Tourism page for Edmonton <2>
- Nelson County
- The following are listed by their distance from Campbellsville, with the one closest to Campbellsville listed first.
- Stiles
(18 miles [29 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Stiles. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Stiles
- Stiles is located in Nelson County
- Google driving directions:
- From your current location to Stiles
- From Campbellsville to Stiles
- Howardstown
(20 miles [32.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Howardstown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Howardstown
- Howardstown is located in Nelson County
- New Hope
(21 miles [33.8 km] to the northwest)
- Gethsemane
(23 miles [37 km] to the northwest)
- Note: The GPS coordinates that we are using for Gethsemane have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gethsemane
- Gethsemane is located in Nelson County
- New Haven
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for New Haven have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Haven
- New Haven is located in Nelson County
- Population from the 2020 Census: 900 people
- Jump to TripAdvisor's Tourism page for New Haven <2>
- Blue Gap
(26 miles [41.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Blue Gap. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Blue Gap
- Blue Gap is located in Nelson County
- Google driving directions:
- From your current location to Blue Gap
- From Campbellsville to Blue Gap
- Greenbrier
(27 miles [43.5 km] to the north)
- Note: The GPS coordinates that we are using for Greenbrier have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenbrier
- Greenbrier is located in Nelson County
- Culvertown
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Culvertown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Culvertown
- Culvertown is located in Nelson County
- Balltown
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Balltown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Balltown
- Balltown is located in Nelson County
- Botland
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Botland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Botland
- Botland is located in Nelson County
- Russell County
- The following are listed by their distance from Campbellsville, with the one closest to Campbellsville listed first.
- Russell Springs
(24 miles [38.6 km] to the southeast)
- Esto
(26 miles [41.8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Esto. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Esto
- Esto is located in Russell County
- Google driving directions:
- From your current location to Esto
- From Campbellsville to Esto
- Middletown
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Middletown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middletown
- Middletown is located in Russell County
- Salem
(27 miles [43.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Salem have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Salem
- Salem is located in Russell County
- Jamestown
(29 miles [46.7 km] to the southeast)
- Washington County
- The following are listed by their distance from Campbellsville, with the one closest to Campbellsville listed first.
- Manton
(25 miles [40.2 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Manton. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Manton
- Manton is located in Washington County
- Google driving directions:
- From your current location to Manton
- From Campbellsville to Manton
- Saint Catharine
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Saint Catharine have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Catharine
- Saint Catharine is located in Washington County
- Springfield
(25 miles [40.2 km] to the north)
- Note: The GPS coordinates that we are using for Springfield have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springfield
- Springfield is located in Washington County
- Population from the 2020 Census: 2,987 people
- Jump to TripAdvisor's Tourism page for Springfield <2>
- Fredericktown
(28 miles [45.1 km] to the north)
- Thompsonville
(29 miles [46.7 km] to the north)
- Booker
(30 miles [48.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Booker. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Booker
- Booker is located in Washington County
- Google driving directions:
- From your current location to Booker
- From Campbellsville to Booker
- Litsey
(30 miles [48.3 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Litsey. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Litsey
- Litsey is located in Washington County
- Google driving directions:
- From your current location to Litsey
- From Campbellsville to Litsey
For an expanded list of the communities that are closest to Campbellsville, see our County-by-County Page for Campbellsville.
Cemeteries Near Campbellsville ...
Below are cemeteries that are in the vicinity of Campbellsville.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Campbellsville covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Campbellsville, with the one closest to Campbellsville listed first.
- Brookside Cemetery
(Less than 2 miles to the southwest)
- Harding Cemetery
(Less than 2 miles to the northwest)
- Jump to our Gazetteer entry for the Harding Cemetery
- Note: The GPS coordinates that we are using for the Harding Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jesus Name Church Cemetery
(3 miles [4.8 km] to the west)
- Reid's Chapel Church Cemetery
(3 miles [4.8 km] to the east)
- Campbellsville Memorial Gardens
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for the Campbellsville Memorial Gardens
- Note: The GPS coordinates that we are using for the Campbellsville Memorial Gardens have been provided by the GNIS.<3> The coordinates still need to be verified.
- Miller Negro Cemetery
(4 miles [6.4 km] to the south)
- New Robinson Creek Baptist Church Cemetery
(4 miles [6.4 km] to the southeast)
- Mt. Zion Cemetery
(4 miles [6.4 km] to the east)
- Shively Cemetery
(4 miles [6.4 km] to the northeast)
- Jump to our Gazetteer entry for the Shively Cemetery
- Note: The GPS coordinates that we are using for the Shively Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Marshall Cemetery
(5 miles [8 km] to the west)
- Jump to our Gazetteer entry for the Marshall Cemetery
- Note: The GPS coordinates that we are using for the Marshall Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Hogan Cemetery
(5 miles [8 km] to the northeast)
- Jump to our Gazetteer entry for the Hogan Cemetery
- Note: The GPS coordinates that we are using for the Hogan Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- St. Francis De Sales Catholic Cemetery
(5 miles [8 km] to the northeast)
- Continue List (424 more) ...
- Rafferty Cemetery
(5 miles [8 km] to the north)
- Jump to our Gazetteer entry for the Rafferty Cemetery
- Note: The GPS coordinates that we are using for the Rafferty Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Brookman Cemetery
(5 miles [8 km] to the north)
- Jump to our Gazetteer entry for the Brookman Cemetery
- Note: The GPS coordinates that we are using for the Brookman Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Miller Cemetery
(6 miles [9.7 km] to the west)
- Jump to our Gazetteer entry for the Miller Cemetery
- Note: The GPS coordinates that we are using for the Miller Cemetery have been provided by the GNIS.<3> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<5>
The Rand McNally Atlas shows that Campbellsville had a population of 1,018 people in 1895 with a post office and railroad service. In 2020, Campbellsville had a population of 11,430 people.
These communities are listed based on their distance from Campbellsville, with the one closest to Campbellsville listed first.
- Wright's
(3 miles [4.8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Wright's. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Wright's
- Wright's is located in Taylor County
- Google driving directions:
- From your current location to Wright's
- From Campbellsville to Wright's
- Elk Horn
(3 miles [4.8 km] to the southeast)
- Burdick
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Burdick have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burdick
- Burdick is located in Taylor County
- Saloma
(5 miles [8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Saloma. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Saloma
- Saloma is located in Taylor County
- Google driving directions:
- From your current location to Saloma
- From Campbellsville to Saloma
- Whitewood
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Whitewood have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whitewood
- Whitewood is located in Green County
- Spurlington
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Spurlington have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spurlington
- Spurlington is located in Taylor County
- Mannsville
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Mannsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mannsville
- Mannsville is located in Taylor County
- Willowtown
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Willowtown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willowtown
- Willowtown is located in Taylor County
- Phillipsburg
(8 miles [12.9 km] to the northeast)
- Finley
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Finley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Finley
- Finley is located in Taylor County
- Pitman
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Pitman have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pitman
- Pitman is located in Taylor County
- Greensburg
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Greensburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greensburg
- Greensburg is located in Green County
- Population from the 2020 Census: 2,057 people
- Jump to TripAdvisor's Tourism page for Greensburg <2>
- Continue List (16 more) ...
- Knifley
(10 miles [16.1 km] to the southeast)
- Coakley
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Coakley have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coakley
- Coakley is located in Green County
- Gresham
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Gresham have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gresham
- Gresham is located in Green County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Campbellsville. See our List of 1890's Communities around Campbellsville.
Newspapers Published in the Vicinity of Campbellsville ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 43 newspapers that have been published in the area around Campbellsville.
We have organized these newspapers into two lists:
- A Local Newspaper List - focusing on the papers published in the immediate area of Campbellsville. There are actually two parts to this list - papers printed in the immediate area of Campbellsville and those printed in the larger area surrounding Campbellsville.
- An Extended Newspaper List - a longer list, sorted by paper name and containing those papers published within 22 miles [35.4 km]<6> of Campbellsville.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we begin with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Campbellsville:
- Websites specific to Kentucky
- Pages specific to Taylor County
- Genealogy information for nearby counties
- Adair County
- Barren County
- Boyle County
- Casey County
- Green County
- Hart County
- Larue County
- Lincoln County
- Marion County
- Mercer County
- Metcalfe County
- Nelson County
- Russell County
- Washington County
- Cemetery Information and Directories for Kentucky
Footnotes ...
<1> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<5> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Campbellsville, please let us know so that we can improve our accuracy. |
<6> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Campbellsville) to Point B.Our distance measurements begin at a specific point in Campbellsville. The point we use is located at these GPS coordinates - Latitude: 37.3423, Longitude: -85.3439 |