|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Belmont in the Atlas, the following communities of the 1890's would have been found near the current location of Belmont. The following communities are listed based on their distance, with the one closest to Belmont listed first.
- Bardstown Junction
(3 miles [4.8 km] to the north)
- Lebanon Junction
(4 miles [6.4 km] to the south)
- Clermont
(4 miles [6.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Clermont have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clermont
- Clermont is located in Bullitt County
- Jump to TripAdvisor's Tourism page for Clermont <3>
- Hobbs
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Hobbs have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hobbs
- Hobbs is located in Bullitt County
- Salt River
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Salt River have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Salt River
- Salt River is located in Bullitt County
- Shepherdsville
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Shepherdsville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shepherdsville
- Shepherdsville is located in Bullitt County
- Population from the 2020 Census: 12,297 people
- Jump to TripAdvisor's Tourism page for Shepherdsville <3>
- Pitt's Point
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Pitt's Point have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pitt's Point
- Pitt's Point is located in Bullitt County
- Colesburg
(8 miles [12.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Colesburg. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Colesburg
- Colesburg is located in Hardin County
- Google driving directions:
- From your current location to Colesburg
- From Belmont to Colesburg
- Deatsville
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Deatsville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Deatsville
- Deatsville is located in Nelson County
- Barrallton
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Barrallton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barrallton
- Barrallton is located in Bullitt County
- Solitude
(10 miles [16.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Solitude. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Solitude
- Solitude is located in Bullitt County
- Google driving directions:
- From your current location to Solitude
- From Belmont to Solitude
- Lenore
(11 miles [17.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Lenore. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Lenore
- Lenore is located in Nelson County
- Google driving directions:
- From your current location to Lenore
- From Belmont to Lenore
- Zoneton
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Zoneton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Zoneton
- Zoneton is located in Bullitt County
- Brooks
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Brooks have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brooks
- Brooks is located in Bullitt County
- Jump to TripAdvisor's Tourism page for Brooks <3>
- Cupio
(11 miles [17.7 km] to the northwest)
- Tunnel Hills
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Tunnel Hills have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tunnel Hills
- Tunnel Hills is located in Hardin County
- Nelsonville
(12 miles [19.3 km] to the south)
- Nazareth
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Nazareth have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nazareth
- Nazareth is located in Nelson County
- Coxs Creek
(13 miles [20.9 km] to the east)
- Highgrove
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Highgrove have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Highgrove
- Highgrove is located in Nelson County
- Smithville
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Smithville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Smithville
- Smithville is located in Bullitt County
- Mount Washington
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Mount Washington have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Washington
- Mount Washington is located in Bullitt County
- Population from the 2020 Census: 14,907 people
- Jump to TripAdvisor's Tourism page for Mount Washington <3>
- Red Hill
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Red Hill have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Hill
- Red Hill is located in Hardin County
- Bardstown
(14 miles [22.5 km] to the southeast)
- West Point
(14 miles [22.5 km] to the northwest)
- Howard
(14 miles [22.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Howard. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Howard
- Howard is located in Hardin County
- Google driving directions:
- From your current location to Howard
- From Belmont to Howard
Off-the-Road Links ...
The official website for State of Kentucky: https://kentucky.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Belmont, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|