Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that White City had a population of 391 people in 1895 with a post office and railroad service. In 2020, White City had a population of 573 people.
The following communities are listed based on their distance from White City, with the one closest to White City listed first.
- Parkerville
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Parkerville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parkerville
- Parkerville is located in Morris County
- Population from the 2020 Census: 59 people
- Skiddy ‑ Historic
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Skiddy have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Skiddy
- Skiddy is located in Morris County
- Latimer
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Latimer have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Latimer
- Latimer is located in Morris County
- Population from the 2020 Census: 19 people
- Dwight
(8 miles [12.9 km] to the northeast)
- Jump to our Gazetteer entry for Dwight
- Dwight is located in Morris County
- Population from the 2020 Census: 255 people
- Kelso
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Kelso have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kelso
- Kelso is located in Morris County
- Downing ‑ Historic
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Downing have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Downing
- Downing is located in Morris County
- Delavan
(10 miles [16.1 km] to the southwest)
- Jump to our Gazetteer entry for Delavan
- Delavan is located in Morris County
- Wilsey
(11 miles [17.7 km] to the south)
- Jump to our Gazetteer entry for Wilsey
- Wilsey is located in Morris County
- Population from the 2020 Census: 142 people
- Woodbine
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Woodbine have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodbine
- Woodbine is located in Dickinson County
- Population from the 2020 Census: 163 people
- Jump to TripAdvisor's Tourism page for Woodbine <3>
- Helmick
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Helmick have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Helmick
- Helmick is located in Morris County
- Alta Vista
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Alta Vista have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alta Vista
- Alta Vista is located in Wabaunsee County
- Population from the 2020 Census: 419 people
- Jump to TripAdvisor's Tourism page for Alta Vista <3>
- Wreford
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Wreford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wreford
- Wreford is located in Geary County
- Herington
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Herington have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Herington
- Herington is located in Dickinson County
- Population from the 2020 Census: 2,240 people
- Jump to TripAdvisor's Tourism page for Herington <3>
- Diamond Springs ‑ Historic
(16 miles [25.7 km] to the south)
- Note: The GPS coordinates that we are using for Diamond Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Diamond Springs
- Diamond Springs is located in Morris County
- Junction City
(16 miles [25.7 km] to the north)
- Kansas Falls
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Kansas Falls have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kansas Falls
- Kansas Falls is located in Geary County
- Burdick
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Burdick have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burdick
- Burdick is located in Morris County
- Pearl
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Pearl have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pearl
- Pearl is located in Dickinson County
- Hope
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Hope have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hope
- Hope is located in Dickinson County
- Population from the 2020 Census: 324 people
- Jump to TripAdvisor's Tourism page for Hope <3>
- Chapman
(19 miles [30.6 km] to the northwest)
- Navarre
(19 miles [30.6 km] to the west)
- Note: The GPS coordinates that we are using for Navarre have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Navarre
- Navarre is located in Dickinson County
- Lost Springs
(20 miles [32.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Lost Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lost Springs
- Lost Springs is located in Marion County
- Population from the 2020 Census: 65 people
- Jump to TripAdvisor's Tourism page for Lost Springs <3>
- Volland
(20 miles [32.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Volland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Volland
- Volland is located in Wabaunsee County
- Hymer
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Hymer have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hymer
- Hymer is located in Chase County
- Enterprise
(21 miles [33.8 km] to the west)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for White City. If you can help, please contact us through our Feedback Page.
The official website for State of Kansas: https://portal.kansas.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about White City, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |