Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Rosaco in the Atlas, the following communities of the 1890's would have been found near the current location of Rosaco. The following communities are listed based on their distance, with the one closest to Rosaco listed first.
- Concordia
(Less than 2 miles to the southwest)
- Rice
(3 miles [4.8 km] to the east)
- Jump to our Gazetteer entry for Rice
- Rice is located in Cloud County
- Yuma
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Yuma have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Yuma
- Yuma is located in Cloud County
- Talmo
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Talmo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Talmo
- Talmo is located in Republic County
- Ames
(9 miles [14.5 km] to the east)
- Jump to our Gazetteer entry for Ames
- Ames is located in Cloud County
- Aurora
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Aurora have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Aurora
- Aurora is located in Cloud County
- Population from the 2020 Census: 55 people
- Wayne
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Wayne have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wayne
- Wayne is located in Republic County
- Norway
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Norway have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Norway
- Norway is located in Republic County
- Macyville ‑ Historic
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Macyville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Macyville
- Macyville is located in Cloud County
- Saint Joseph
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Saint Joseph have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saint Joseph
- Saint Joseph is located in Cloud County
- Clyde
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Clyde have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clyde
- Clyde is located in Cloud County
- Population from the 2020 Census: 647 people
- Jump to TripAdvisor's Tourism page for Clyde <2>
- Jamestown
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Jamestown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jamestown
- Jamestown is located in Cloud County
- Population from the 2020 Census: 258 people
- Agenda
(13 miles [20.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Agenda have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Agenda
- Agenda is located in Republic County
- Population from the 2020 Census: 64 people
- Kackley
(14 miles [22.5 km] to the northwest)
- Jump to our Gazetteer entry for Kackley
- Kackley is located in Republic County
- Oneonta ‑ Historic
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Oneonta have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oneonta
- Oneonta is located in Cloud County
- Belleville
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Belleville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belleville
- Belleville is located in Republic County
- Population from the 2020 Census: 1,841 people
- Jump to TripAdvisor's Tourism page for Belleville <2>
- Brantford
(16 miles [25.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Brantford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brantford
- Brantford is located in Washington County
- Vining
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Vining have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vining
- Vining is located in Clay County
- Population from the 2020 Census: 42 people
- Scandia
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Scandia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Scandia
- Scandia is located in Republic County
- Population from the 2020 Census: 335 people
- Jump to TripAdvisor's Tourism page for Scandia <2>
- Cuba
(17 miles [27.4 km] to the northeast)
- Note: The GPS coordinates that we are using for Cuba have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cuba
- Cuba is located in Republic County
- Population from the 2020 Census: 141 people
- Jump to TripAdvisor's Tourism page for Cuba <2>
- Scottsville
(17 miles [27.4 km] to the west)
- Jump to our Gazetteer entry for Scottsville
- Scottsville is located in Mitchell County
- Population from the 2020 Census: 23 people
- Glasco
(18 miles [29 km] to the southwest)
- Note: The GPS coordinates that we are using for Glasco have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glasco
- Glasco is located in Cloud County
- Population from the 2020 Census: 448 people
- Former names for Glasco:
- Dell Ray
- Glasgow
- Jump to TripAdvisor's Tourism page for Glasco <2>
- Miltonvale
(18 miles [29 km] to the southeast)
- Clifton
(18 miles [29 km] to the east)
- Jump to our Gazetteer entry for Clifton
- Clifton is located in Washington County
- Population from the 2020 Census: 506 people
- Clifton has also been known as:
- West Clifton
- Jump to TripAdvisor's Tourism page for Clifton <2>
- Courtland
(20 miles [32.2 km] to the northwest)
Off-the-Road Links ...
The official website for State of Kansas: https://portal.kansas.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Rosaco, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |