TripAdvisor Links
Introduction ...
Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
In addition, you'll find a link to the TripAdvisor Forum for Marquette. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.
All of this can be found on the TripAdvisor's Tourism page for Marquette.
The following list should help you find nearby communities that also have TripAdvisor pages.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Marquette - within 29 miles [46.7 km]<1>.
Our list sorts the communities in alphabetical order. There are 17 communities listed:
- Assaria
(15 miles [24.1 km] to the northeast)- Note: The GPS coordinates that we are using for Assaria have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Assaria
- Assaria is located in Saline County
- Population from the 2020 Census: 408 people
- Jump to TripAdvisor's Tourism page for Assaria <3>
- Brookville
(15 miles [24.1 km] to the north)- Jump to our Gazetteer entry for Brookville
- Brookville is located in Saline County
- Population from the 2020 Census: 252 people
- Jump to TripAdvisor's Tourism page for Brookville <3>
- Google driving directions:
- From your current location to Brookville
- From Marquette to Brookville
- Buhler
(28 miles [45.1 km] to the south)- Jump to our Gazetteer entry for Buhler
- Buhler is located in Reno County
- Population from the 2020 Census: 1,269 people
- Buhler has also been known as:
- Tulip Town
- Jump to TripAdvisor's Tourism page for Buhler <3>
- Google driving directions:
- From your current location to Buhler
- From Marquette to Buhler
- Canton
(24 miles [38.6 km] to the southeast)- Jump to our Gazetteer entry for Canton
- Canton is located in McPherson County
- Population from the 2020 Census: 688 people
- Jump to TripAdvisor's Tourism page for Canton <3>
- Google driving directions:
- From your current location to Canton
- From Marquette to Canton
- Ellsworth
(24 miles [38.6 km] to the northwest)- Jump to our Gazetteer entry for Ellsworth
- Ellsworth is located in Ellsworth County
- Population from the 2020 Census: 2,935 people
- Jump to TripAdvisor's Tourism page for Ellsworth <3>
- Google driving directions:
- From your current location to Ellsworth
- From Marquette to Ellsworth
- Falun
(8 miles [12.9 km] to the northeast)- Jump to our Gazetteer entry for Falun
- Falun is located in Saline County
- Jump to TripAdvisor's Tourism page for Falun <3>
- Google driving directions:
- From your current location to Falun
- From Marquette to Falun
- Galva
(19 miles [30.6 km] to the southeast)- Note: The GPS coordinates that we are using for Galva have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Galva
- Galva is located in McPherson County
- Population from the 2020 Census: 887 people
- Jump to TripAdvisor's Tourism page for Galva <3>
- Geneseo
(17 miles [27.4 km] to the west)- Jump to our Gazetteer entry for Geneseo
- Geneseo is located in Rice County
- Population from the 2020 Census: 254 people
- Jump to TripAdvisor's Tourism page for Geneseo <3>
- Google driving directions:
- From your current location to Geneseo
- From Marquette to Geneseo
- Gypsum
(24 miles [38.6 km] to the northeast)- Jump to our Gazetteer entry for Gypsum
- Gypsum is located in Saline County
- Population from the 2020 Census: 391 people
- Jump to TripAdvisor's Tourism page for Gypsum <3>
- Google driving directions:
- From your current location to Gypsum
- From Marquette to Gypsum
- Inman
(22 miles [35.4 km] to the south)- Note: The GPS coordinates that we are using for Inman have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Inman
- Inman is located in McPherson County
- Population from the 2020 Census: 1,324 people
- Jump to TripAdvisor's Tourism page for Inman <3>
- Kanopolis
(20 miles [32.2 km] to the northwest)- Note: The GPS coordinates that we are using for Kanopolis have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kanopolis
- Kanopolis is located in Ellsworth County
- Population from the 2020 Census: 446 people
- Jump to TripAdvisor's Tourism page for Kanopolis <3>
- Lindsborg
(8 miles [12.9 km] to the east)- Jump to our Gazetteer entry for Lindsborg
- Lindsborg is located in McPherson County
- Population from the 2020 Census: 3,276 people
- Jump to TripAdvisor's Tourism page for Lindsborg <3>
- Google driving directions:
- From your current location to Lindsborg
- From Marquette to Lindsborg
- Little River
(14 miles [22.5 km] to the southwest)- Jump to our Gazetteer entry for Little River
- Little River is located in Rice County
- Population from the 2020 Census: 513 people
- Jump to TripAdvisor's Tourism page for Little River <3>
- Google driving directions:
- From your current location to Little River
- From Marquette to Little River
- Lyons
(24 miles [38.6 km] to the southwest)- Note: The GPS coordinates that we are using for Lyons have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lyons
- Lyons is located in Rice County
- Population from the 2020 Census: 3,433 people
- Jump to TripAdvisor's Tourism page for Lyons <3>
- McPherson
(15 miles [24.1 km] to the southeast)- Jump to our Gazetteer entry for McPherson
- McPherson is located in McPherson County
- Population from the 2020 Census: 13,013 people
- Jump to TripAdvisor's Tourism page for McPherson <3>
- Google driving directions:
- From your current location to McPherson
- From Marquette to McPherson
- Moundridge
(29 miles [46.7 km] to the southeast)- Jump to our Gazetteer entry for Moundridge
- Moundridge is located in McPherson County
- Population from the 2020 Census: 1,861 people
- Jump to TripAdvisor's Tourism page for Moundridge <3>
- Google driving directions:
- From your current location to Moundridge
- From Marquette to Moundridge
- Salina
(22 miles [35.4 km] to the northeast)- Jump to our Gazetteer entry for Salina
- Salina is located in Saline County
- Population from the 2020 Census: 46,274 people
- Jump to TripAdvisor's Tourism page for Salina <3>
- Google driving directions:
- From your current location to Salina
- From Marquette to Salina
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Marquette. If you can help, please contact us through our Feedback Page.
The official website for McPherson County: www.mcphersoncountyks.us/
The official website for State of Kansas: https://portal.kansas.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Marquette) to Point B.Our distance measurements begin at a specific point in Marquette. The point we use is located at these GPS coordinates - Latitude: 38.5554, Longitude: -97.8339 In this case, the coordinates for Marquette have been provided by the Geographic Names Information System (GNIS). |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |