|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Union Chapel Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Union Chapel Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Union Chapel Cemetery. We've listed the following communities based on their distance, with the closest first.
- Mayfield
(2 miles [3.2 km] to the northeast)
- Note: The GPS coordinates that we are using for Mayfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mayfield
- Mayfield is located in Sumner County
- Population from the 2020 Census: 104 people
- Perth
(5 miles [8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Perth. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Perth
- Perth is located in Sumner County
- Milan
(5 miles [8 km] to the west)
- Jump to our Gazetteer entry for Milan
- Milan is located in Sumner County
- Population from the 2020 Census: 77 people
- Roland
(6 miles [9.7 km] to the northeast)
- Jump to our Gazetteer entry for Roland
- Roland is located in Sumner County
- Corbin
(7 miles [11.3 km] to the south)
- Jump to our Gazetteer entry for Corbin
- Corbin is located in Sumner County
- Anson
(9 miles [14.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Anson. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Anson
- Anson is located in Sumner County
- Wellington
(10 miles [16.1 km] to the east)
- Ewell
(10 miles [16.1 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Ewell. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Ewell
- Ewell is located in Sumner County
- Argonia
(10 miles [16.1 km] to the west)
- Conway Springs
(11 miles [17.7 km] to the north)
- Doster
(13 miles [20.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Doster. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Doster
- Doster is located in Sumner County
- Caldwell
(13 miles [20.9 km] to the south)
- Drury
(14 miles [22.5 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Drury. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Drury
- Drury is located in Sumner County
- Cicero
(14 miles [22.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Cicero. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Cicero
- Cicero is located in Sumner County
- Millerton
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Millerton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millerton
- Millerton is located in Sumner County
- South Haven
(15 miles [24.1 km] to the southeast)
- Freeport
(15 miles [24.1 km] to the west)
- Jump to our Gazetteer entry for Freeport
- Freeport is located in Harper County
- Estimated population in 2019: 4 people
- Hunnewell
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Hunnewell have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hunnewell
- Hunnewell is located in Sumner County
- Population from the 2020 Census: 59 people
- Portland
(17 miles [27.4 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Portland. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Portland
- Portland is located in Sumner County
- Milton
(17 miles [27.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Milton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Milton
- Milton is located in Sumner County
- Danville
(17 miles [27.4 km] to the west)
- Jump to our Gazetteer entry for Danville
- Danville is located in Harper County
- Population from the 2020 Census: 33 people
- Danville has also been known as:
- Coalville
- Viola
(18 miles [29 km] to the north)
- Note: The GPS coordinates that we are using for Viola have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Viola
- Viola is located in Sedgwick County
- Population from the 2020 Census: 126 people
- Jump to TripAdvisor's Tourism page for Viola <4>
- Bluff City
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Bluff City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bluff City
- Bluff City is located in Harper County
- Population from the 2020 Census: 58 people
- Anness
(19 miles [30.6 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Anness. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Anness
- Anness is located in Sedgwick County
- Belle Plaine
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Belle Plaine have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Belle Plaine
- Belle Plaine is located in Sumner County
- Population from the 2020 Census: 1,535 people
- Jump to TripAdvisor's Tourism page for Belle Plaine <4>
- Clearwater
(19 miles [30.6 km] to the north)
Off-the-Road Links ...
The official website for Sumner County: www.co.sumner.ks.us/ The official website for State of Kansas: https://portal.kansas.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Union Chapel Cemetery. The point we use is located at these GPS coordinates - Latitude: 37.2279, Longitude: -97.5743 In this case, the coordinates for the Union Chapel Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|