RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Kansas >> Sumner County >> St. Josephs Cemetery >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
Kansas


The Commemorative Quarter for Kansas







Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the St. Josephs Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the St. Josephs Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the St. Josephs Cemetery. We've listed the following cemeteries based on their distance, with the closest first.

  • Conway Springs
    (Less than 2 miles to the north)
  • Ewell
    (3 miles [4.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Ewell have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ewell
    • Ewell is located in Sumner County
  • Anson
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for Anson have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Anson
    • Anson is located in Sumner County
  • Viola
    (7 miles [11.3 km] to the north)
    • Note: The GPS coordinates that we are using for Viola have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Viola
    • Viola is located in Sedgwick County
    • Population from the 2020 Census: 126 people
    • Jump to TripAdvisor's Tourism page for Viola <2>
  • Milan
    (8 miles [12.9 km] to the south)
    • Jump to our Gazetteer entry for Milan
    • Milan is located in Sumner County
    • Population from the 2020 Census: 77 people
  • Anness
    (8 miles [12.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Anness have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Anness
    • Anness is located in Sedgwick County
  • Milton
    (8 miles [12.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Milton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Milton
    • Milton is located in Sumner County
  • Mayfield
    (9 miles [14.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Mayfield have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mayfield
    • Mayfield is located in Sumner County
    • Population from the 2020 Census: 104 people
  • Argonia
    (10 miles [16.1 km] to the southwest)
  • Clearwater
    (11 miles [17.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Clearwater have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clearwater
    • Clearwater is located in Sedgwick County
    • Population from the 2020 Census: 2,580 people
    • Jump to TripAdvisor's Tourism page for Clearwater <2>
  • Roland
    (12 miles [19.3 km] to the southeast)
    • Jump to our Gazetteer entry for Roland
    • Roland is located in Sumner County
  • Norwich
    (12 miles [19.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Norwich have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Norwich
    • Norwich is located in Kingman County
    • Population from the 2020 Census: 427 people
    • Jump to TripAdvisor's Tourism page for Norwich <2>
  • Clonmel
    (13 miles [20.9 km] to the north)
    • Jump to our Gazetteer entry for Clonmel
    • Clonmel is located in Sedgwick County
  • Danville
    (15 miles [24.1 km] to the southwest)
    • Jump to our Gazetteer entry for Danville
    • Danville is located in Harper County
    • Population from the 2020 Census: 33 people
    • Danville has also been known as:
    • Coalville
  • Wellington
    (15 miles [24.1 km] to the southeast)
  • Cicero
    (16 miles [25.7 km] to the east)
    • Note: The GPS coordinates that we are using for Cicero have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cicero
    • Cicero is located in Sumner County
  • Peck
    (16 miles [25.7 km] to the northeast)
  • Bayneville
    (16 miles [25.7 km] to the northeast)
    • Jump to our Gazetteer entry for Bayneville
    • Bayneville is located in Sedgwick County
  • Runnymede
    (16 miles [25.7 km] to the west)
    • Note: The GPS coordinates that we are using for Runnymede have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Runnymede
    • Runnymede is located in Harper County
  • Freeport
    (17 miles [27.4 km] to the southwest)
    • Jump to our Gazetteer entry for Freeport
    • Freeport is located in Harper County
    • Estimated population in 2019: 4 people
  • Corbin
    (18 miles [29 km] to the south)
    • Jump to our Gazetteer entry for Corbin
    • Corbin is located in Sumner County
  • Cheney
    (18 miles [29 km] to the northwest)
  • Belle Plaine
    (19 miles [30.6 km] to the east)
    • Note: The GPS coordinates that we are using for Belle Plaine have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Belle Plaine
    • Belle Plaine is located in Sumner County
    • Population from the 2020 Census: 1,535 people
    • Jump to TripAdvisor's Tourism page for Belle Plaine <2>
  • Wego-Waco
    (19 miles [30.6 km] to the northeast)
    • Jump to our Gazetteer entry for Wego-Waco
    • Wego-Waco is located in Sedgwick County
  • Murray Gill
    (19 miles [30.6 km] to the northeast)
    • Jump to our Gazetteer entry for Murray Gill
    • Murray Gill is located in Sedgwick County
  • Goddard
    (19 miles [30.6 km] to the north)
  • Garden Plain
    (19 miles [30.6 km] to the north)
    • Note: The GPS coordinates that we are using for Garden Plain have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Garden Plain
    • Garden Plain is located in Sedgwick County
    • Population from the 2020 Census: 912 people
  • Adams
    (19 miles [30.6 km] to the west)
    • Note: The GPS coordinates that we are using for Adams have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Adams
    • Adams is located in Kingman County

The official website for Sumner County: www.co.sumner.ks.us/

The official website for State of Kansas: https://portal.kansas.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the St. Josephs Cemetery. The point we use is located at these GPS coordinates - Latitude: 37.3803, Longitude: -97.6389       In this case, the coordinates for the St. Josephs Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 06 Apr 2024