|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the St. Concordia Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the St. Concordia Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the St. Concordia Cemetery.
We've listed the following communities based on their distance, with the closest first:
- Concordia
(Less than 2 miles to the northwest)
- Cook
(2 miles [3.2 km] to the east)
- Cook is located in Cloud County
- Jump to our Gazetteer entry for Cook
- Huscher
(3 miles [4.8 km] to the southeast)
- Huscher is located in Cloud County
- Jump to our Gazetteer entry for Huscher
- Rice
(5 miles [8 km] to the east)
- Rice is located in Cloud County
- Jump to our Gazetteer entry for Rice
- Yuma
(5 miles [8 km] to the west)
- Yuma is located in Cloud County
- Jump to our Gazetteer entry for Yuma
- Aurora
(9 miles [14.5 km] to the southeast)
- Aurora is located in Cloud County
- Jump to our Gazetteer entry for Aurora
- Population from the 2020 Census: 55 people
- Macyville ‑ Historic
(10 miles [16.1 km] to the southwest)
- Macyville is located in Cloud County
- Jump to our Gazetteer entry for Macyville
- Ames
(11 miles [17.7 km] to the east)
- Ames is located in Cloud County
- Jump to our Gazetteer entry for Ames
- Norway
(11 miles [17.7 km] to the northwest)
- Norway is located in Republic County
- Jump to our Gazetteer entry for Norway
- Jamestown
(11 miles [17.7 km] to the west)
- Jamestown is located in Cloud County
- Jump to our Gazetteer entry for Jamestown
- Population from the 2020 Census: 258 people
- Saint Joseph
(13 miles [20.9 km] to the east)
- Saint Joseph is located in Cloud County
- Jump to our Gazetteer entry for Saint Joseph
- Clyde
(13 miles [20.9 km] to the east)
- Oneonta ‑ Historic
(13 miles [20.9 km] to the northwest)
- Oneonta is located in Cloud County
- Jump to our Gazetteer entry for Oneonta
- Kackley
(14 miles [22.5 km] to the northwest)
- Kackley is located in Republic County
- Jump to our Gazetteer entry for Kackley
- Agenda
(15 miles [24.1 km] to the northeast)
- Agenda is located in Republic County
- Jump to our Gazetteer entry for Agenda
- Population from the 2020 Census: 64 people
- Glasco
(16 miles [25.7 km] to the southwest)
- Glasco is located in Cloud County
- Jump to our Gazetteer entry for Glasco
- Population from the 2020 Census: 448 people
- Former names for Glasco:
- Dell Ray
- Glasgow
- Jump to TripAdvisor's Tourism page for Glasco <2>
- Scottsville
(16 miles [25.7 km] to the west)
- Scottsville is located in Mitchell County
- Jump to our Gazetteer entry for Scottsville
- Population from the 2020 Census: 23 people
- Miltonvale
(17 miles [27.4 km] to the southeast)
- Scandia
(17 miles [27.4 km] to the northwest)
- Vining
(18 miles [29 km] to the east)
- Vining is located in Clay County
- Jump to our Gazetteer entry for Vining
- Population from the 2020 Census: 42 people
- Brantford
(18 miles [29 km] to the northeast)
- Brantford is located in Washington County
- Jump to our Gazetteer entry for Brantford
- Belleville
(18 miles [29 km] to the north)
- Simpson
(19 miles [30.6 km] to the southwest)
- Clifton
(19 miles [30.6 km] to the east)
- Clifton is located in Washington County
- Jump to our Gazetteer entry for Clifton
- Population from the 2020 Census: 506 people
- Clifton has also been known as:
- West Clifton
- Jump to TripAdvisor's Tourism page for Clifton <2>
- Cuba
(19 miles [30.6 km] to the northeast)
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- St. Concordia Cemetery) to Point B. In other words: 'As the crow flies'. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|