|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Old Tailor Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Old Tailor Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Old Tailor Cemetery (FG ID #93247). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Old Tailor Cemetery. We've listed the following communities based on their distance, with the closest first.
- New Albany
(Less than 2 miles to the southeast)
- Jump to our Gazetteer entry for New Albany
- New Albany is located in Wilson County
- Population from the 2020 Census: 50 people
- Fall River
(3 miles [4.8 km] to the west)
- Note: The GPS coordinates that we are using for Fall River have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fall River
- Fall River is located in Greenwood County
- Population from the 2020 Census: 142 people
- Jump to TripAdvisor's Tourism page for Fall River <4>
- Coyville
(7 miles [11.3 km] to the northeast)
- Jump to our Gazetteer entry for Coyville
- Coyville is located in Wilson County
- Population from the 2020 Census: 41 people
- Fredonia
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Fredonia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fredonia
- Fredonia is located in Wilson County
- Population from the 2020 Census: 2,182 people
- Jump to TripAdvisor's Tourism page for Fredonia <4>
- Cave Springs
(9 miles [14.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Cave Springs. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Cave Springs
- Cave Springs is located in Elk County
- Busby
(9 miles [14.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Busby. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Busby
- Busby is located in Elk County
- Buxton
(10 miles [16.1 km] to the south)
- Jump to our Gazetteer entry for Buxton
- Buxton is located in Wilson County
- Benedict Junction
(10 miles [16.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Benedict Junction. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Benedict Junction
- Benedict Junction is located in Wilson County
- Middletown
(11 miles [17.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Middletown. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Middletown
- Middletown is located in Wilson County
- Upola
(12 miles [19.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Upola. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Upola
- Upola is located in Elk County
- Benedict
(12 miles [19.3 km] to the east)
- Fiat
(13 miles [20.9 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Fiat. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Fiat
- Fiat is located in Elk County
- Guilford
(13 miles [20.9 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Guilford. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Guilford
- Guilford is located in Wilson County
- Roper
(13 miles [20.9 km] to the east)
- Jump to our Gazetteer entry for Roper
- Roper is located in Wilson County
- Lafontaine
(14 miles [22.5 km] to the southeast)
- Jump to our Gazetteer entry for Lafontaine
- Lafontaine is located in Wilson County
- Toronto
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Toronto have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Toronto
- Toronto is located in Woodson County
- Population from the 2020 Census: 252 people
- Jump to TripAdvisor's Tourism page for Toronto <4>
- Severy
(14 miles [22.5 km] to the west)
- Jump to our Gazetteer entry for Severy
- Severy is located in Greenwood County
- Population from the 2020 Census: 224 people
- Longton
(15 miles [24.1 km] to the southwest)
- Jump to our Gazetteer entry for Longton
- Longton is located in Elk County
- Population from the 2020 Census: 306 people
- Former name for Longton:
- Elk Rapids
- Jump to TripAdvisor's Tourism page for Longton <4>
- Buffalo
(16 miles [25.7 km] to the northeast)
- Jump to our Gazetteer entry for Buffalo
- Buffalo is located in Wilson County
- Population from the 2020 Census: 205 people
- Climax
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Climax have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Climax
- Climax is located in Greenwood County
- Population from the 2020 Census: 64 people
- Oak Valley
(17 miles [27.4 km] to the south)
- Jump to our Gazetteer entry for Oak Valley
- Oak Valley is located in Elk County
- Altoona
(17 miles [27.4 km] to the east)
- Jump to our Gazetteer entry for Altoona
- Altoona is located in Wilson County
- Population from the 2020 Census: 371 people
- Rest
(17 miles [27.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Rest. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Rest
- Rest is located in Wilson County
- Batesville
(17 miles [27.4 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Batesville. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Batesville
- Batesville is located in Woodson County
- Howard
(18 miles [29 km] to the southwest)
- Jump to our Gazetteer entry for Howard
- Howard is located in Elk County
- Population from the 2020 Census: 600 people
- Former name for Howard:
- Howard City
- Jump to TripAdvisor's Tourism page for Howard <4>
- Neal
(18 miles [29 km] to the north)
- Jump to our Gazetteer entry for Neal
- Neal is located in Greenwood County
- Hilford
(18 miles [29 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Hilford. Although the coordinates have been estimated, they should be in the vicinity.<5>
- Jump to our Gazetteer entry for Hilford
- Hilford is located in Wilson County
Off-the-Road Links ...
The official website for State of Kansas: https://portal.kansas.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Old Tailor Cemetery. The point we use is located at these GPS coordinates - Latitude: 37.5884, Longitude: -95.9655 In this case, the coordinates for the Old Tailor Cemetery have been provided by the Geographic Names Information System (GNIS). |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<5> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|