|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Mt. Hope Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Mt. Hope Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Mt. Hope Cemetery. We've listed the following communities based on their distance, with the closest first.
- Ellis
(Less than 2 miles to the northwest)
- Hog Back
(3 miles [4.8 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Hog Back. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hog Back
- Hog Back is located in Ellis County
- Yocemento
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Yocemento have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Yocemento
- Yocemento is located in Ellis County
- Ogallah
(10 miles [16.1 km] to the west)
- Jump to our Gazetteer entry for Ogallah
- Ogallah is located in Trego County
- Antonino
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Antonino have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Antonino
- Antonino is located in Ellis County
- Hays
(13 miles [20.9 km] to the east)
- Munjor
(17 miles [27.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Munjor have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Munjor
- Munjor is located in Ellis County
- Toulon
(17 miles [27.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Toulon. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Toulon
- Toulon is located in Ellis County
- Catharine
(17 miles [27.4 km] to the east)
- Note: The GPS coordinates that we are using for Catharine have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Catharine
- Catharine is located in Ellis County
- Catharine has also been known as:
- Catherine
- Trego
(18 miles [29 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Trego. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Trego
- Trego is located in Trego County
- Trego has also been known as:
- Trego Center
- Trego Tank
- WaKeeney
(18 miles [29 km] to the west)
- Schoenchen
(19 miles [30.6 km] to the southeast)
- Note: The GPS coordinates that we are using for Schoenchen have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Schoenchen
- Schoenchen is located in Ellis County
- Population from the 2020 Census: 206 people
- Turkville
(20 miles [32.2 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Turkville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Turkville
- Turkville is located in Ellis County
- Zurich
(21 miles [33.8 km] to the north)
- Note: The GPS coordinates that we are using for Zurich have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Zurich
- Zurich is located in Rooks County
- Population from the 2020 Census: 94 people
- Brownell
(22 miles [35.4 km] to the southwest)
- Palco
(22 miles [35.4 km] to the north)
- Jump to our Gazetteer entry for Palco
- Palco is located in Rooks County
- Population from the 2020 Census: 262 people
- Liebenthal
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Liebenthal have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Liebenthal
- Liebenthal is located in Rush County
- Population from the 2020 Census: 91 people
- Victoria
(22 miles [35.4 km] to the east)
- Note: The GPS coordinates that we are using for Victoria have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Victoria
- Victoria is located in Ellis County
- Population from the 2020 Census: 1,215 people
- Emmeram
(22 miles [35.4 km] to the east)
- Jump to our Gazetteer entry for Emmeram
- Emmeram is located in Ellis County
- McCracken
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for McCracken have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McCracken
- McCracken is located in Rush County
- Population from the 2020 Census: 171 people
- Jump to TripAdvisor's Tourism page for McCracken <2>
- Plainville
(24 miles [38.6 km] to the northeast)
- Pfeifer
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Pfeifer have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pfeifer
- Pfeifer is located in Ellis County
- Walker
(25 miles [40.2 km] to the east)
- Note: The GPS coordinates that we are using for Walker have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Walker
- Walker is located in Ellis County
- Hargrave
(26 miles [41.8 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Hargrave. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hargrave
- Hargrave is located in Rush County
- Codell
(26 miles [41.8 km] to the northeast)
- Jump to our Gazetteer entry for Codell
- Codell is located in Rooks County
- Former name for Codell:
- Florreyville
- Damar
(26 miles [41.8 km] to the north)
Off-the-Road Links ...
The official website for Ellis County: www.ellisco.net/ The official website for State of Kansas: https://portal.kansas.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Mt. Hope Cemetery. The point we use is located at these GPS coordinates - Latitude: 38.9339, Longitude: -99.5497 In this case, the coordinates for the Mt. Hope Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|