|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the McLouth Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the McLouth Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the McLouth Cemetery. We've listed the following communities based on their distance, with the closest first.
- McLouth
(Less than 2 miles to the east)
- Oskaloosa
(5 miles [8 km] to the west)
- Springdale
(6 miles [9.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Springdale. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Springdale
- Springdale is located in Leavenworth County
- Jarbalo
(7 miles [11.3 km] to the east)
- Jump to our Gazetteer entry for Jarbalo
- Jarbalo is located in Leavenworth County
- Winchester
(9 miles [14.5 km] to the north)
- Tonganoxie
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Tonganoxie have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tonganoxie
- Tonganoxie is located in Leavenworth County
- Population from the 2020 Census: 5,690 people
- Jump to TripAdvisor's Tourism page for Tonganoxie <2>
- Dunavant
(9 miles [14.5 km] to the northwest)
- Jump to our Gazetteer entry for Dunavant
- Dunavant is located in Jefferson County
- Buck Creek
(10 miles [16.1 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Buck Creek. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Buck Creek
- Buck Creek is located in Jefferson County
- Williamstown
(11 miles [17.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Williamstown. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Williamstown
- Williamstown is located in Jefferson County
- Midland
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Midland have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Midland
- Midland is located in Douglas County
- Hoge
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Hoge have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hoge
- Hoge is located in Leavenworth County
- Easton
(11 miles [17.7 km] to the northeast)
- Jump to our Gazetteer entry for Easton
- Easton is located in Leavenworth County
- Population from the 2020 Census: 256 people
- Former name for Easton:
- Eastin
- Lake Shore
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Lake Shore have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lake Shore
- Lake Shore is located in Jefferson County
- Lakeside Village
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Lakeside Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lakeside Village
- Lakeside Village is located in Jefferson County
- Perry
(12 miles [19.3 km] to the southwest)
- Boyle
(12 miles [19.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Boyle. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Boyle
- Boyle is located in Jefferson County
- Thompsonville
(13 miles [20.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Thompsonville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Thompsonville
- Thompsonville is located in Jefferson County
- Medina
(13 miles [20.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Medina. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Medina
- Medina is located in Jefferson County
- Ozawkie
(13 miles [20.9 km] to the west)
- Hilldale
(13 miles [20.9 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Hilldale. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hilldale
- Hilldale is located in Jefferson County
- Lake Ridge
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Lake Ridge have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lake Ridge
- Lake Ridge is located in Jefferson County
- Lecompton
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Lecompton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lecompton
- Lecompton is located in Douglas County
- Population from the 2020 Census: 659 people
- Jump to TripAdvisor's Tourism page for Lecompton <2>
- Bismarck Grove ‑ Historic
(14 miles [22.5 km] to the south)
- Jump to our Gazetteer entry for Bismarck Grove
- Bismarck Grove is located in Douglas County
- Fairmount
(14 miles [22.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Fairmount. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Fairmount
- Fairmount is located in Leavenworth County
- Fairmount has also been known as:
- Fairmont Village
- Indian Ridge
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Indian Ridge have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Indian Ridge
- Indian Ridge is located in Jefferson County
- West Shore
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for West Shore have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Shore
- West Shore is located in Jefferson County
- Hilldale South
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Hilldale South have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hilldale South
- Hilldale South is located in Jefferson County
Off-the-Road Links ...
The official website for Jefferson County: www.jfcountyks.com/ The official website for State of Kansas: https://portal.kansas.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the McLouth Cemetery. The point we use is located at these GPS coordinates - Latitude: 39.1933, Longitude: -95.2150 In this case, the coordinates for the McLouth Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|