RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Kansas >> Sumner County >> Conway Springs Cemetery >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
Kansas

The Commemorative Quarter for Kansas





Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Conway Springs Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Conway Springs Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Conway Springs Cemetery. We've listed the following communities based on their distance, with the closest first.

  • Conway Springs
    (Less than 2 miles to the west)
  • Millerton
    (4 miles [6.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Millerton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Millerton
    • Millerton is located in Sumner County
  • Ewell
    (5 miles [8 km] to the southwest)
    • Note: We haven't been able to verify our GPS coordinates for Ewell. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Ewell
    • Ewell is located in Sumner County
  • Anson
    (5 miles [8 km] to the east)
    • Note: We haven't been able to verify our GPS coordinates for Anson. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Anson
    • Anson is located in Sumner County
  • Viola
    (6 miles [9.7 km] to the north)
    • Note: The GPS coordinates that we are using for Viola have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Viola
    • Viola is located in Sedgwick County
    • Population from the 2020 Census: 126 people
    • Jump to TripAdvisor's Tourism page for Viola <2>
  • Anness
    (8 miles [12.9 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for Anness. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Anness
    • Anness is located in Sedgwick County
  • Milton
    (8 miles [12.9 km] to the west)
    • Note: The GPS coordinates that we are using for Milton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Milton
    • Milton is located in Sumner County
  • Milan
    (9 miles [14.5 km] to the south)
    • Jump to our Gazetteer entry for Milan
    • Milan is located in Sumner County
    • Population from the 2020 Census: 77 people
  • Mayfield
    (9 miles [14.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Mayfield have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mayfield
    • Mayfield is located in Sumner County
    • Population from the 2020 Census: 104 people
  • Clearwater
    (10 miles [16.1 km] to the northeast)
  • Argonia
    (11 miles [17.7 km] to the southwest)
  • Roland
    (12 miles [19.3 km] to the southeast)
    • Jump to our Gazetteer entry for Roland
    • Roland is located in Sumner County
  • Clonmel
    (12 miles [19.3 km] to the north)
    • Jump to our Gazetteer entry for Clonmel
    • Clonmel is located in Sedgwick County
  • Norwich
    (13 miles [20.9 km] to the west)
    • Note: The GPS coordinates that we are using for Norwich have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Norwich
    • Norwich is located in Kingman County
    • Population from the 2020 Census: 427 people
    • Jump to TripAdvisor's Tourism page for Norwich <2>
  • Wellington
    (14 miles [22.5 km] to the southeast)
  • Peck
    (14 miles [22.5 km] to the northeast)
  • Perth
    (15 miles [24.1 km] to the southeast)
    • Note: We haven't been able to verify our GPS coordinates for Perth. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Perth
    • Perth is located in Sumner County
  • Cicero
    (15 miles [24.1 km] to the east)
    • Note: We haven't been able to verify our GPS coordinates for Cicero. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Cicero
    • Cicero is located in Sumner County
  • Bayneville
    (15 miles [24.1 km] to the northeast)
    • Jump to our Gazetteer entry for Bayneville
    • Bayneville is located in Sedgwick County
  • Danville
    (16 miles [25.7 km] to the southwest)
    • Jump to our Gazetteer entry for Danville
    • Danville is located in Harper County
    • Population from the 2020 Census: 33 people
    • Danville has also been known as:
    • Coalville
  • Runnymede
    (17 miles [27.4 km] to the west)
    • Note: We haven't been able to verify our GPS coordinates for Runnymede. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Runnymede
    • Runnymede is located in Harper County
  • Freeport
    (18 miles [29 km] to the southwest)
    • Jump to our Gazetteer entry for Freeport
    • Freeport is located in Harper County
    • Estimated population in 2019: 4 people
  • Corbin
    (18 miles [29 km] to the south)
    • Jump to our Gazetteer entry for Corbin
    • Corbin is located in Sumner County
  • Belle Plaine
    (18 miles [29 km] to the east)
    • Note: The GPS coordinates that we are using for Belle Plaine have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Belle Plaine
    • Belle Plaine is located in Sumner County
    • Population from the 2020 Census: 1,535 people
    • Jump to TripAdvisor's Tourism page for Belle Plaine <2>
  • Wego-Waco
    (18 miles [29 km] to the northeast)
    • Jump to our Gazetteer entry for Wego-Waco
    • Wego-Waco is located in Sedgwick County
  • Haysville
    (18 miles [29 km] to the northeast)
    • Note: The GPS coordinates that we are using for Haysville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Haysville
    • Haysville is located in Sedgwick County
    • Population from the 2020 Census: 11,389 people
    • Jump to TripAdvisor's Tourism page for Haysville <2>
  • Murray Gill
    (18 miles [29 km] to the northeast)
    • Jump to our Gazetteer entry for Murray Gill
    • Murray Gill is located in Sedgwick County

The official website for Sumner County: www.co.sumner.ks.us/

The official website for State of Kansas: https://portal.kansas.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Conway Springs Cemetery. The point we use is located at these GPS coordinates - Latitude: 37.3870, Longitude: -97.6198       In this case, the coordinates for the Conway Springs Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 28 Apr 2025