|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Browns Chapel Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Browns Chapel Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Browns Chapel Cemetery. We've listed the following communities based on their distance, with the closest first.
- Fall River
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Fall River have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fall River
- Fall River is located in Greenwood County
- Population from the 2020 Census: 142 people
- Jump to TripAdvisor's Tourism page for Fall River <3>
- Severy
(7 miles [11.3 km] to the west)
- Jump to our Gazetteer entry for Severy
- Severy is located in Greenwood County
- Population from the 2020 Census: 224 people
- Cave Springs
(8 miles [12.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Cave Springs. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Cave Springs
- Cave Springs is located in Elk County
- Climax
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Climax have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Climax
- Climax is located in Greenwood County
- Population from the 2020 Census: 64 people
- Fiat
(9 miles [14.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Fiat. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Fiat
- Fiat is located in Elk County
- New Albany
(10 miles [16.1 km] to the southeast)
- Jump to our Gazetteer entry for New Albany
- New Albany is located in Wilson County
- Population from the 2020 Census: 50 people
- Coyville
(10 miles [16.1 km] to the east)
- Jump to our Gazetteer entry for Coyville
- Coyville is located in Wilson County
- Population from the 2020 Census: 41 people
- Busby
(12 miles [19.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Busby. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Busby
- Busby is located in Elk County
- Toronto
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Toronto have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Toronto
- Toronto is located in Woodson County
- Population from the 2020 Census: 252 people
- Jump to TripAdvisor's Tourism page for Toronto <3>
- Neal
(12 miles [19.3 km] to the north)
- Jump to our Gazetteer entry for Neal
- Neal is located in Greenwood County
- Middletown
(14 miles [22.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Middletown. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Middletown
- Middletown is located in Wilson County
- Howard
(15 miles [24.1 km] to the southwest)
- Jump to our Gazetteer entry for Howard
- Howard is located in Elk County
- Population from the 2020 Census: 600 people
- Former name for Howard:
- Howard City
- Jump to TripAdvisor's Tourism page for Howard <3>
- Piedmont
(15 miles [24.1 km] to the west)
- Note: The GPS coordinates that we are using for Piedmont have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Piedmont
- Piedmont is located in Greenwood County
- Jump to TripAdvisor's Tourism page for Piedmont <3>
- Upola
(16 miles [25.7 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Upola. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Upola
- Upola is located in Elk County
- Buxton
(16 miles [25.7 km] to the southeast)
- Jump to our Gazetteer entry for Buxton
- Buxton is located in Wilson County
- Fredonia
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Fredonia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fredonia
- Fredonia is located in Wilson County
- Population from the 2020 Census: 2,182 people
- Jump to TripAdvisor's Tourism page for Fredonia <3>
- Eureka
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Eureka have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eureka
- Eureka is located in Greenwood County
- Population from the 2020 Census: 2,301 people
- Jump to TripAdvisor's Tourism page for Eureka <3>
- Benedict Junction
(17 miles [27.4 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Benedict Junction. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Benedict Junction
- Benedict Junction is located in Wilson County
- Batesville
(17 miles [27.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Batesville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Batesville
- Batesville is located in Woodson County
- Longton
(18 miles [29 km] to the south)
- Jump to our Gazetteer entry for Longton
- Longton is located in Elk County
- Population from the 2020 Census: 306 people
- Former name for Longton:
- Elk Rapids
- Jump to TripAdvisor's Tourism page for Longton <3>
- Elk Falls
(19 miles [30.6 km] to the south)
- Benedict
(19 miles [30.6 km] to the east)
- Roper
(19 miles [30.6 km] to the east)
- Jump to our Gazetteer entry for Roper
- Roper is located in Wilson County
- Guilford
(20 miles [32.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Guilford. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Guilford
- Guilford is located in Wilson County
- Oak Valley
(21 miles [33.8 km] to the south)
- Jump to our Gazetteer entry for Oak Valley
- Oak Valley is located in Elk County
- Lafontaine
(21 miles [33.8 km] to the southeast)
- Jump to our Gazetteer entry for Lafontaine
- Lafontaine is located in Wilson County
- Buffalo
(21 miles [33.8 km] to the east)
- Jump to our Gazetteer entry for Buffalo
- Buffalo is located in Wilson County
- Population from the 2020 Census: 205 people
- Reece
(21 miles [33.8 km] to the northwest)
- Jump to our Gazetteer entry for Reece
- Reece is located in Greenwood County
Off-the-Road Links ...
The official website for State of Kansas: https://portal.kansas.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Browns Chapel Cemetery. The point we use is located at these GPS coordinates - Latitude: 37.6495, Longitude: -96.0922 In this case, the coordinates for the Browns Chapel Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|