|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Burns had a population of 250 people in 1895 with a post office and railroad service. In 2020, Burns had a population of 204 people.
The following communities are listed based on their distance from Burns, with the one closest to Burns listed first.
- De Graff
(7 miles [11.3 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for De Graff. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for De Graff
- De Graff is located in Butler County
- Wonsevu
(7 miles [11.3 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Wonsevu. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Wonsevu
- Wonsevu is located in Chase County
- Florence
(10 miles [16.1 km] to the north)
- Potwin
(12 miles [19.3 km] to the southwest)
- Jump to our Gazetteer entry for Potwin
- Potwin is located in Butler County
- Population from the 2020 Census: 438 people
- Cedar Point
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Cedar Point have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cedar Point
- Cedar Point is located in Chase County
- Population from the 2020 Census: 26 people
- Peabody
(13 miles [20.9 km] to the northwest)
- Jump to our Gazetteer entry for Peabody
- Peabody is located in Marion County
- Population from the 2020 Census: 1,079 people
- Former name for Peabody:
- Coneburgh
- Jump to TripAdvisor's Tourism page for Peabody <3>
- Brainerd
(14 miles [22.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Brainerd. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Brainerd
- Brainerd is located in Butler County
- Chelsea ‑ Historic
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Chelsea have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chelsea
- Chelsea is located in Butler County
- Oursler
(14 miles [22.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Oursler. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Oursler
- Oursler is located in Marion County
- Whitewater
(16 miles [25.7 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Whitewater. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Whitewater
- Whitewater is located in Butler County
- Population from the 2020 Census: 723 people
- Jump to TripAdvisor's Tourism page for Whitewater <3>
- Clements
(16 miles [25.7 km] to the northeast)
- Jump to our Gazetteer entry for Clements
- Clements is located in Chase County
- Aulne ‑ Historic
(16 miles [25.7 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Aulne. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Aulne
- Aulne is located in Marion County
- Annelly
(18 miles [29 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Annelly. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Annelly
- Annelly is located in Harvey County
- El Dorado
(18 miles [29 km] to the south)
- Matfield Green
(18 miles [29 km] to the east)
- Marion
(19 miles [30.6 km] to the north)
- Pontiac
(20 miles [32.2 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Pontiac. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Pontiac
- Pontiac is located in Butler County
- Walton
(20 miles [32.2 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Walton. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Walton
- Walton is located in Harvey County
- Population from the 2020 Census: 224 people
- Jump to TripAdvisor's Tourism page for Walton <3>
- McLains
(21 miles [33.8 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for McLains. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for McLains
- McLains is located in Harvey County
- Towanda
(21 miles [33.8 km] to the south)
- Note: The GPS coordinates that we are using for Towanda have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Towanda
- Towanda is located in Butler County
- Population from the 2020 Census: 1,446 people
- Jump to TripAdvisor's Tourism page for Towanda <3>
- Canada
(21 miles [33.8 km] to the northwest)
- Jump to our Gazetteer entry for Canada
- Canada is located in Marion County
- Furley
(22 miles [35.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Furley have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Furley
- Furley is located in Sedgwick County
- Bazaar
(22 miles [35.4 km] to the northeast)
- Jump to our Gazetteer entry for Bazaar
- Bazaar is located in Chase County
- Benton
(23 miles [37 km] to the southwest)
- Note: The GPS coordinates that we are using for Benton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Benton
- Benton is located in Butler County
- Population from the 2020 Census: 865 people
- Jump to TripAdvisor's Tourism page for Benton <3>
- Rosalia
(23 miles [37 km] to the southeast)
- Elmdale
(23 miles [37 km] to the northeast)
- Note: The GPS coordinates that we are using for Elmdale have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elmdale
- Elmdale is located in Chase County
- Population from the 2020 Census: 51 people
- Jump to TripAdvisor's Tourism page for Elmdale <3>
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Burns. If you can help, please contact us through our Feedback Page. The official website for State of Kansas: https://portal.kansas.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Burns, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|