Outdoor Activities ...
As we travel, we like to pursue some of our interests (such as astronomy and bird watching).
When in Tratebas Mill, we use the following websites to find information relevant to Tratebas Mill and the surrounding area.
- Weather ...
- Before heading outdoors, you should check the weather:
- The National Weather Service forecast for Tratebas Mill
- Astronomy & Satellites ...
- Whether using binoculars, a small telescope or the naked-eye, the Heavens-Above website can help you to find your way around the night-time sky. In addition to detailed sky charts, their website will help you find planets, asteriods, comets, satellites and their tracks across the sky.
- To give accurate results, Heavens-Above requires the latitude and longitude of your location. As a starting point, when we link to Heavens-Above, we pass this GPS location for Tratebas Mill:
- 41.562272, -87.018168
- Once you're on the Heavens-Above website, you can improve its accuracy by giving a more precise longitude and latitude as your actual position.
- The Heavens-Above Website, centered on Tratebas Mill
- Bird Watching ...
- We enjoy finding new spots for bird watching and we use the eBird website for local sighting reports and to help identify hotspots.
- The eBird website is organized on a county-by-county basis. We have selected Porter County as the starting point when you click on the link below:
- eBird sighting report for Porter County
- Since Tratebas Mill is near LaPorte County and also Lake County, we have provided a link to their eBird sighting reports:
- eBird sighting report for LaPorte County
- eBird sighting report for Lake County
- Waymarking ...
- Looking for somewhere out of the ordinary? Find a unique place and want to share it with others? Then it's time to visit Waymarking.com:
- Waymark.com
Curious and Interesting Names Near Tratebas Mill ...
As we travel, we always see a community with a name that gives pause. While there are names which are interesting or familiar, some catch our attention or strike our fancy. We always wonder about such a name. If time permits and the community is not too far, we'll usually try to make a side-trip.
- Chesterton
(4 miles [6.4 km] to the northwest)- Jump to our Gazetteer entry for Chesterton
- Chesterton is located in Porter County
- Population from the 2020 Census: 14,232 people
- Jump to TripAdvisor's Tourism page for Chesterton <1>
- Edgewater
(3 miles [4.8 km] to the southwest) - Forest Oaks
(4 miles [6.4 km] to the west)- Note: The GPS coordinates that we are using for Forest Oaks have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Forest Oaks
- Forest Oaks is located in Porter County
- Graham Woods
(3 miles [4.8 km] to the north)- Note: The GPS coordinates that we are using for Graham Woods have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Graham Woods
- Graham Woods is located in Porter County
- Hillcrest
(3 miles [4.8 km] to the southwest) - Lake View
(3 miles [4.8 km] to the southwest) - Lincoln Hills
(7 miles [11.3 km] to the southwest)- Note: The GPS coordinates that we are using for Lincoln Hills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lincoln Hills
- Lincoln Hills is located in Porter County
- Long Lake Island
(3 miles [4.8 km] to the southwest)- Note: The GPS coordinates that we are using for Long Lake Island have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Long Lake Island
- Long Lake Island is located in Porter County
- McCool
(6 miles [9.7 km] to the west) - Meadowbrook
(6 miles [9.7 km] to the northwest)- Note: The GPS coordinates that we are using for Meadowbrook have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Meadowbrook
- Meadowbrook is located in Porter County
- Shady Side
(7 miles [11.3 km] to the northwest)- Note: The GPS coordinates that we are using for Shady Side have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shady Side
- Shady Side is located in Porter County
How Far From Tratebas Mill to ...
We spend a lot of time looking through Gazetteers, Almanacs & Directories that were published in the late 1800's and early 1900's. Many of the Gazetteers include the distance from a community such as Tratebas Mill to various places of note, such as the White House.
With a nod to our favorite Gazetteers, the straight-line distance<3> beginning in Tratebas Mill and extending to:
- Valparaiso, which is the Seat of Porter County, lies just to the South Southwest.
- Indianapolis, which is the State Capital of Indiana, lies 131 miles [210.8 km]<3> to the south southeast (SSE). If you could drive a straight line from Tratebas Mill to Indianapolis, with an average speed<4>of 63 miles [101.4 km] per hour, it would take less than three hours to make the trip. A comfortable walk of 2.2 miles [3.5 km] per hour would take 8 days. A horse and buggy averaging 3.2 miles [5.1 km] per hour would take 6 days.
- The White House (Washington, DC) is 557 miles [896.4 km] to the east southeast (ESE). Driving would take just over a day, a buggy would take 22 days and walking would take 32 days.
- The shortest distance<5> to Jerusalem (specifically the Temple Mount and the Dome of the Rock) is 6,175 miles [9,937.7 km] and it lies to the northeast (NE).<6>
- The distance to the Great Mosque of Mecca (specifically the Ka'bah - or Kaaba ) is 6,911 miles [11,122.2 km] and it lies to the northeast (NE).<7>
- The distance to Saint Peter's Basilica (The Vatican) is 4,793 miles [7,713.6 km] and it lies to the northeast (NE).<8>
Off-the-Road Links ...
Unfortunately, we don't know of a website for Tratebas Mill. If you can help, please contact us through our Feedback Page.
The official website for Porter County: www.porterco.org/
The official website for State of Indiana: https://www.in.gov
Footnotes ...
| <1> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Tratebas Mill) to Point B.Our distance measurements begin at a specific point in Tratebas Mill. The point we use is located at these GPS coordinates - Latitude: 41.5623, Longitude: -87.0182 |
| <4> | While we have tried to pick reasonable speeds, the rate of travel is very theoretical - obstacles like fences, hills, lakes, river crossings and rest stops have been ignored. When we say 'Days' of travel, we're assuming 8 hours of travel per day. |
| <5> | The shortest line can be visualized by stretching a string on a Globe from Point A to Point B - this is known as a Great Circle Route. Where you might expect the shortest route from Tratebas Mill to the Middle East to be East and South, the Great Circle Route actually lies to the North and East. |
| <6> | The calculated bearing (or angle) to Jerusalem is 314.032 degrees. |
| <7> | The calculated bearing (or angle) to Mecca is 310.825 degrees. |
| <8> | The calculated bearing (or angle) to the Vatican is 308.357 degrees. |