Census Data for Renner
So far, we found very little information about Renner. The little that we've found leads us believe that the community is historic.<1>
We've added Renner to our Gazetteer with the hope that we can develop more information. If you can help us with Renner, please Contact Us.
As far as we can tell, Renner has not been included in past Census counts, so there is no population information for this community.
While we don't have census information for Renner, you might be interested in some nearby communities where we do:
- Hartford City
(3 miles [4.8 km] to the southeast)- Jump to our Gazetteer entry for Hartford City
- Hartford City is located in Blackford County
- Jump to TripAdvisor's Tourism page for Hartford City <2>
- Upland
(3 miles [4.8 km] to the west)- Note: The GPS coordinates that we are using for Upland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Upland
- Upland is located in Grant County
- Jump to TripAdvisor's Tourism page for Upland <2>
- Shamrock Lakes
(4 miles [6.4 km] to the south)- Note: The GPS coordinates that we are using for Shamrock Lakes have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shamrock Lakes
- Shamrock Lakes is located in Blackford County
- Matthews
(6 miles [9.7 km] to the southwest) - Fowlerton
(8 miles [12.9 km] to the southwest) - Gas City
(8 miles [12.9 km] to the west)- Note: The GPS coordinates that we are using for Gas City have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gas City
- Gas City is located in Grant County
- Jump to TripAdvisor's Tourism page for Gas City <2>
- Montpelier
(9 miles [14.5 km] to the northeast)- Note: The GPS coordinates that we are using for Montpelier have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Montpelier
- Montpelier is located in Blackford County
- Jump to TripAdvisor's Tourism page for Montpelier <2>
- Eaton
(10 miles [16.1 km] to the southeast)- Jump to our Gazetteer entry for Eaton
- Eaton is located in Delaware County
- Jump to TripAdvisor's Tourism page for Eaton <2>
- Jonesboro
(10 miles [16.1 km] to the west)- Note: The GPS coordinates that we are using for Jonesboro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jonesboro
- Jonesboro is located in Grant County
- Jump to TripAdvisor's Tourism page for Jonesboro <2>
- Van Buren
(10 miles [16.1 km] to the north) - Fairmount
(11 miles [17.7 km] to the west)- Jump to our Gazetteer entry for Fairmount
- Fairmount is located in Grant County
- Jump to TripAdvisor's Tourism page for Fairmount <2>
- Gaston
(11 miles [17.7 km] to the south)- Note: The GPS coordinates that we are using for Gaston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gaston
- Gaston is located in Delaware County
- Jump to TripAdvisor's Tourism page for Gaston <2>
- Continue List (256 more) ...
- Dunkirk
(13 miles [20.9 km] to the southeast)- Note: The GPS coordinates that we are using for Dunkirk have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dunkirk
- Dunkirk is located in Jay County
- Jump to TripAdvisor's Tourism page for Dunkirk <2>
- Marion
(13 miles [20.9 km] to the northwest)- Jump to our Gazetteer entry for Marion
- Marion is located in Grant County
- Jump to TripAdvisor's Tourism page for Marion <2>
- Pennville
(14 miles [22.5 km] to the east)- Jump to our Gazetteer entry for Pennville
- Pennville is located in Jay County
- Jump to TripAdvisor's Tourism page for Pennville <2>
- Dunkirk
Blackford County ...
Renner is located in Blackford County<4>.
For more information, please visit our Census Page for Blackford County.
Miscellaneous Information for Renner ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either Blackford County or the community of Renner:
- The GNIS Codes ...
- The FIPS Codes ...
- An earlier (and largely obsolete) identification method was called the Federal Information Processing Standard (FIPS):
- State Code: 18 (Indiana)
- County Code: 009 (Blackford County)
- Place Code: 63765 (Renner)
- State & County Code: 18/009 (Indiana / Blackford County)
- State & Place Code: 18/63765 (Indiana / Renner)
- Misc. Census Codes ...
- Renner would have been located in Census Region #2 (the Midwest Region) and Division #3 (the East North-Central Division).
For more information about the various Federal identification codes, please visit our Misc Page for Renner.
Off-the-Road Links ...
The official website for Blackford County: www.blackfordcounty.com/
The official website for State of Indiana: https://www.in.gov
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Renner, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <4> | If you're interested in how the shape of Indiana's counties, including Blackford, have changed over time, we recommend the Atlas of Historical County Boundaries. |