|
TripAdvisor Links
Introduction ...
Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
In addition, you'll find a link to the TripAdvisor Forum for Markle. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.
All of this can be found on the TripAdvisor's Tourism page for Markle.
The following list should help you find nearby communities that also have TripAdvisor pages.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Markle - within 29 miles [46.7 km]<1>.
Our list sorts the communities in alphabetical order. There are 41 communities listed:
- Andrews
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Andrews have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Andrews
- Andrews is located in Huntington County
- Population from the 2020 Census: 1,134 people
- Jump to TripAdvisor's Tourism page for Andrews <3>
- Arcola
(19 miles [30.6 km] to the north)
- Berne
(23 miles [37 km] to the southeast)
- Bluffton
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Bluffton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bluffton
- Bluffton is located in Wells County
- Population from the 2020 Census: 10,094 people
- Jump to TripAdvisor's Tourism page for Bluffton <3>
- Bryant
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Bryant have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bryant
- Bryant is located in Jay County
- Population from the 2020 Census: 247 people
- Jump to TripAdvisor's Tourism page for Bryant <3>
- Churubusco
(28 miles [45.1 km] to the north)
- Note: The GPS coordinates that we are using for Churubusco have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Churubusco
- Churubusco is located in Whitley County
- Population from the 2020 Census: 1,999 people
- Jump to TripAdvisor's Tourism page for Churubusco <3>
- Columbia City
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Columbia City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Columbia City
- Columbia City is located in Whitley County
- Population from the 2020 Census: 9,416 people
- Jump to TripAdvisor's Tourism page for Columbia City <3>
- Decatur
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Decatur have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Decatur
- Decatur is located in Adams County
- Population from the 2020 Census: 9,884 people
- Jump to TripAdvisor's Tourism page for Decatur <3>
- Fort Wayne
(20 miles [32.2 km] to the northeast)
- Gas City
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Gas City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gas City
- Gas City is located in Grant County
- Population from the 2020 Census: 5,698 people
- Jump to TripAdvisor's Tourism page for Gas City <3>
- Geneva
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Geneva have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Geneva
- Geneva is located in Adams County
- Population from the 2020 Census: 1,362 people
- Jump to TripAdvisor's Tourism page for Geneva <3>
- Hartford City
(25 miles [40.2 km] to the south)
- Hoagland
(19 miles [30.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Hoagland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hoagland
- Hoagland is located in Allen County
- Jump to TripAdvisor's Tourism page for Hoagland <3>
- Huntertown
(29 miles [46.7 km] to the north)
- Huntington
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Huntington have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Huntington
- Huntington is located in Huntington County
- Population from the 2020 Census: 17,052 people
- Jump to TripAdvisor's Tourism page for Huntington <3>
- Jonesboro
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Jonesboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jonesboro
- Jonesboro is located in Grant County
- Population from the 2020 Census: 1,629 people
- Jump to TripAdvisor's Tourism page for Jonesboro <3>
- Lagro
(20 miles [32.2 km] to the west)
- Note: The GPS coordinates that we are using for Lagro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lagro
- Lagro is located in Wabash County
- Population from the 2020 Census: 388 people
- Jump to TripAdvisor's Tourism page for Lagro <3>
- Laketon
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Laketon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Laketon
- Laketon is located in Wabash County
- Jump to TripAdvisor's Tourism page for Laketon <3>
- Marion
(25 miles [40.2 km] to the southwest)
- Monroe
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Monroe have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monroe
- Monroe is located in Adams County
- Population from the 2020 Census: 882 people
- Jump to TripAdvisor's Tourism page for Monroe <3>
- Monroeville
(26 miles [41.8 km] to the northeast)
- Montpelier
(19 miles [30.6 km] to the south)
- Note: The GPS coordinates that we are using for Montpelier have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Montpelier
- Montpelier is located in Blackford County
- Population from the 2020 Census: 1,666 people
- Jump to TripAdvisor's Tourism page for Montpelier <3>
- New Haven
(23 miles [37 km] to the northeast)
- North Manchester
(25 miles [40.2 km] to the northwest)
- Ossian
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Ossian have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ossian
- Ossian is located in Wells County
- Population from the 2020 Census: 3,370 people
- Jump to TripAdvisor's Tourism page for Ossian <3>
- Pennville
(25 miles [40.2 km] to the southeast)
- Pleasant Mills
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Pleasant Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pleasant Mills
- Pleasant Mills is located in Adams County
- Jump to TripAdvisor's Tourism page for Pleasant Mills <3>
- Preble
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Preble have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Preble
- Preble is located in Adams County
- Jump to TripAdvisor's Tourism page for Preble <3>
- Roanoke
(9 miles [14.5 km] to the north)
- South Whitley
(23 miles [37 km] to the northwest)
- Sweetser
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Sweetser have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sweetser
- Sweetser is located in Grant County
- Population from the 2020 Census: 1,092 people
- Jump to TripAdvisor's Tourism page for Sweetser <3>
- Uniondale
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Uniondale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Uniondale
- Uniondale is located in Wells County
- Population from the 2020 Census: 311 people
- Jump to TripAdvisor's Tourism page for Uniondale <3>
- Upland
(26 miles [41.8 km] to the south)
- Note: The GPS coordinates that we are using for Upland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Upland
- Upland is located in Grant County
- Population from the 2020 Census: 3,706 people
- Jump to TripAdvisor's Tourism page for Upland <3>
- Urbana
(24 miles [38.6 km] to the west)
- Wabash
(25 miles [40.2 km] to the west)
- Note: The GPS coordinates that we are using for Wabash have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wabash
- Wabash is located in Wabash County
- Population from the 2020 Census: 9,845 people
- Jump to TripAdvisor's Tourism page for Wabash <3>
- Warren
(10 miles [16.1 km] to the southwest)
- Williams
(19 miles [30.6 km] to the east)
- Note: The GPS coordinates that we are using for Williams have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williams
- Williams is located in Adams County
- Jump to TripAdvisor's Tourism page for Williams <3>
- Willshire
(28 miles [45.1 km] to the east)
- Note: The GPS coordinates that we are using for Willshire have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willshire
- Willshire is located in Van Wert County (OH)
- Population from the 2020 Census: 380 people
- Jump to TripAdvisor's Tourism page for Willshire <3>
- Wren
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Wren have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wren
- Wren is located in Van Wert County (OH)
- Population from the 2020 Census: 184 people
- Jump to TripAdvisor's Tourism page for Wren <3>
- Yoder
(10 miles [16.1 km] to the northeast)
- Zanesville
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Zanesville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Zanesville
- Zanesville is located in Wells County
- Population from the 2020 Census: 617 people
- Jump to TripAdvisor's Tourism page for Zanesville <3>
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Markle. If you can help, please contact us through our Feedback Page. The official website for Huntington County: www.huntington.in.us/ The official website for State of Indiana: https://www.in.gov
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Markle) to Point B.Our distance measurements begin at a specific point in Markle. The point we use is located at these GPS coordinates - Latitude: 40.8267, Longitude: -85.3369 |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|