Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Harristown had a population of 75 people in 1895 with a post office and railroad service.
The following communities are listed based on their distance from Harristown, with the one closest to Harristown listed first.
- Canton
(Less than 2 miles to the north)
- Note: The GPS coordinates that we are using for Canton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Canton
- Canton is located in Washington County
- Farabee
(2 miles [3.2 km] to the south)
- Note: The GPS coordinates that we are using for Farabee have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Farabee
- Farabee is located in Washington County
- South Boston
(2 miles [3.2 km] to the southeast)
- New Philadelphia
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for New Philadelphia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Philadelphia
- New Philadelphia is located in Washington County
- Salem
(4 miles [6.4 km] to the west)
- Blue River
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Blue River have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blue River
- Blue River is located in Washington County
- Bartle
(7 miles [11.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Bartle. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Bartle
- Bartle is located in Washington County
- Google driving directions:
- From your current location to Bartle
- From Harristown to Bartle
- Kossuth
(8 miles [12.9 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Kossuth. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Kossuth
- Kossuth is located in Washington County
- Google driving directions:
- From your current location to Kossuth
- From Harristown to Kossuth
- Hitchcock
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Hitchcock have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hitchcock
- Hitchcock is located in Washington County
- Borden
(9 miles [14.5 km] to the southeast)
- Little York
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Little York have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little York
- Little York is located in Washington County
- Population from the 2020 Census: 191 people
- Martinsburg
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Martinsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Martinsburg
- Martinsburg is located in Washington County
- Leota
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Leota have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leota
- Leota is located in Scott County
- Rush Creek Valley
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Rush Creek Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rush Creek Valley
- Rush Creek Valley is located in Washington County
- Smedley
(10 miles [16.1 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Smedley. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Smedley
- Smedley is located in Washington County
- Google driving directions:
- From your current location to Smedley
- From Harristown to Smedley
- Organ Springs
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Organ Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Organ Springs
- Organ Springs is located in Washington County
- New Providence
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for New Providence came from an uncertain source and they still need to be verified:<5>
- Jump to our Gazetteer entry for New Providence
- New Providence is located in Clark County
- Millport
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Millport have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millport
- Millport is located in Washington County
- Broom Hill
(12 miles [19.3 km] to the southeast)
- Livonia
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Livonia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Livonia
- Livonia is located in Washington County
- Population from the 2020 Census: 120 people
- Palmyra
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Palmyra have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Palmyra
- Palmyra is located in Harrison County
- Population from the 2020 Census: 958 people
- Jump to TripAdvisor's Tourism page for Palmyra <3>
- Blue Lick
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Blue Lick have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blue Lick
- Blue Lick is located in Clark County
- Underwood
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Underwood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Underwood
- Underwood is located in Clark County
- Campbellsburg
(13 miles [20.9 km] to the west)
- Fredericksburg
(14 miles [22.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Fredericksburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fredericksburg
- Fredericksburg is located in Washington County
- Estimated population in 2013: 84 people
- Jump to TripAdvisor's Tourism page for Fredericksburg <3>
- Scottsville
(14 miles [22.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Scottsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Scottsville
- Scottsville is located in Floyd County
- Wilson
(14 miles [22.5 km] to the southeast)
- Henryville
(14 miles [22.5 km] to the east)
- Vienna
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Vienna have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vienna
- Vienna is located in Scott County
- Scottsburg
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Scottsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Scottsburg
- Scottsburg is located in Scott County
- Population from the 2020 Census: 6,703 people
- Jump to TripAdvisor's Tourism page for Scottsburg <3>
- Marshfield
(14 miles [22.5 km] to the northeast)
- Tampico
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Tampico have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tampico
- Tampico is located in Jackson County
- Claysville
(14 miles [22.5 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Claysville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Claysville
- Claysville is located in Washington County
- Google driving directions:
- From your current location to Claysville
- From Harristown to Claysville
Off-the-Road Links ...
The official website for Washington County: www.washingtoncountyindiana.com/
The official website for State of Indiana: https://www.in.gov
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Harristown, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database. |