Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Cutler had a population of 129 people in 1895 with a post office and railroad service.
The following communities are listed based on their distance from Cutler, with the one closest to Cutler listed first.
- Bringhurst
(3 miles [4.8 km] to the north)
- Bringhurst is located in Carroll County
- Jump to our Gazetteer entry for Bringhurst
- Sedalia
(4 miles [6.4 km] to the south)
- Sedalia is located in Clinton County
- Jump to our Gazetteer entry for Sedalia
- Flora
(4 miles [6.4 km] to the north)
- Owasco
(5 miles [8 km] to the west)
- Owasco is located in Carroll County
- Jump to our Gazetteer entry for Owasco
- Rossville
(5 miles [8 km] to the southwest)
- Geetingsville
(5 miles [8 km] to the southeast)
- Geetingsville is located in Clinton County
- Jump to our Gazetteer entry for Geetingsville
- Ockley
(5 miles [8 km] to the west)
- Ockley is located in Carroll County
- Jump to our Gazetteer entry for Ockley
- Moran
(6 miles [9.7 km] to the south)
- Moran is located in Clinton County
- Jump to our Gazetteer entry for Moran
- Burlington
(6 miles [9.7 km] to the east)
- Radnor
(6 miles [9.7 km] to the west)
- Radnor is located in Carroll County
- Jump to our Gazetteer entry for Radnor
- Cambria
(7 miles [11.3 km] to the south)
- Cambria is located in Clinton County
- Jump to our Gazetteer entry for Cambria
- Harley
(7 miles [11.3 km] to the northwest)
- Harley is located in Carroll County
- Jump to our Gazetteer entry for Harley
- Edna Mills
(8 miles [12.9 km] to the southwest)
- Edna Mills is located in Clinton County
- Jump to our Gazetteer entry for Edna Mills
- Beard
(8 miles [12.9 km] to the southeast)
- Beard is located in Clinton County
- Jump to our Gazetteer entry for Beard
- Middlefork
(8 miles [12.9 km] to the southeast)
- Middlefork is located in Clinton County
- Jump to our Gazetteer entry for Middlefork
- Pyrmont
(8 miles [12.9 km] to the west)
- Pyrmont is located in Carroll County
- Jump to our Gazetteer entry for Pyrmont
- Camden
(9 miles [14.5 km] to the north)
- Pettit
(10 miles [16.1 km] to the southwest)
- Pettit is located in Tippecanoe County
- Jump to our Gazetteer entry for Pettit
- Shanghai
(10 miles [16.1 km] to the east)
- Shanghai is located in Howard County
- Jump to our Gazetteer entry for Shanghai
- Poplar Grove
(10 miles [16.1 km] to the northeast)
- Poplar Grove is located in Howard County
- Jump to our Gazetteer entry for Poplar Grove
- Colburn
(10 miles [16.1 km] to the west)
- Colburn is located in Tippecanoe County
- Jump to our Gazetteer entry for Colburn
- Rockfield
(11 miles [17.7 km] to the north)
- Rockfield is located in Carroll County
- Jump to our Gazetteer entry for Rockfield
- Mulberry
(11 miles [17.7 km] to the southwest)
- Young America
(11 miles [17.7 km] to the northeast)
- Young America is located in Cass County
- Jump to our Gazetteer entry for Young America
- Deer Creek
(11 miles [17.7 km] to the northeast)
- Deer Creek is located in Carroll County
- Jump to our Gazetteer entry for Deer Creek
- Delphi
(11 miles [17.7 km] to the northwest)
- Heath
(11 miles [17.7 km] to the west)
- Heath is located in Tippecanoe County
- Jump to our Gazetteer entry for Heath
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Cutler, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |