Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Culver in the Atlas, the following communities of the 1890's would have been found near the current location of Culver. The following communities are listed based on their distance, with the one closest to Culver listed first.
- Maxinkuckee
(2 miles [3.2 km] to the east)
- Maxinkuckee is located in Marshall County
- Jump to our Gazetteer entry for Maxinkuckee
- Burr Oak
(2 miles [3.2 km] to the north)
- Burr Oak is located in Marshall County
- Jump to our Gazetteer entry for Burr Oak
- Rutland
(3 miles [4.8 km] to the northeast)
- Rutland is located in Marshall County
- Jump to our Gazetteer entry for Rutland
- Hibbard
(3 miles [4.8 km] to the northeast)
- Hibbard is located in Marshall County
- Jump to our Gazetteer entry for Hibbard
- Monterey
(5 miles [8 km] to the southwest)
- Monterey is located in Pulaski County
- Jump to our Gazetteer entry for Monterey
- Population from the 2020 Census: 200 people
- Delong
(5 miles [8 km] to the south)
- Delong is located in Fulton County
- Jump to our Gazetteer entry for Delong
- Leiters Ford
(6 miles [9.7 km] to the south)
- Leiters Ford is located in Fulton County
- Jump to our Gazetteer entry for Leiters Ford
- Twin Lakes
(6 miles [9.7 km] to the northeast)
- Twin Lakes is located in Marshall County
- Jump to our Gazetteer entry for Twin Lakes
- Ober
(6 miles [9.7 km] to the northwest)
- Ober is located in Starke County
- Jump to our Gazetteer entry for Ober
- Ora
(7 miles [11.3 km] to the southwest)
- Ora is located in Starke County
- Jump to our Gazetteer entry for Ora
- Winona
(7 miles [11.3 km] to the west)
- Winona is located in Starke County
- Jump to our Gazetteer entry for Winona
- Richland Center
(8 miles [12.9 km] to the southeast)
- Richland Center is located in Fulton County
- Jump to our Gazetteer entry for Richland Center
- Argos
(9 miles [14.5 km] to the east)
- Donaldson
(9 miles [14.5 km] to the north)
- Donaldson is located in Marshall County
- Jump to our Gazetteer entry for Donaldson
- Plymouth
(10 miles [16.1 km] to the northeast)
- Grovertown
(11 miles [17.7 km] to the north)
- Grovertown is located in Starke County
- Jump to our Gazetteer entry for Grovertown
- Walnut
(11 miles [17.7 km] to the east)
- Walnut is located in Marshall County
- Jump to our Gazetteer entry for Walnut
- Knox
(11 miles [17.7 km] to the northwest)
- Tiosa
(12 miles [19.3 km] to the east)
- Tiosa is located in Fulton County
- Jump to our Gazetteer entry for Tiosa
- Kewanna
(13 miles [20.9 km] to the south)
- Kewanna is located in Fulton County
- Jump to our Gazetteer entry for Kewanna
- Population from the 2020 Census: 598 people
- Inwood
(13 miles [20.9 km] to the northeast)
- Inwood is located in Marshall County
- Jump to our Gazetteer entry for Inwood
- Ripley
(14 miles [22.5 km] to the southwest)
- Ripley is located in Pulaski County
- Jump to our Gazetteer entry for Ripley
- Winamac
(14 miles [22.5 km] to the southwest)
- Harris
(14 miles [22.5 km] to the northeast)
- Harris is located in Marshall County
- Jump to our Gazetteer entry for Harris
- Hamlet
(14 miles [22.5 km] to the northwest)
- Toto
(14 miles [22.5 km] to the west)
- Toto is located in Starke County
- Jump to our Gazetteer entry for Toto
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Culver, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |