|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the St. Thomas Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the St. Thomas Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the St. Thomas Cemetery. We've listed the following communities based on their distance, with the closest first.
- North Judson
(Less than 2 miles to the northeast)
- Note: The GPS coordinates that we are using for North Judson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Judson
- North Judson is located in Starke County
- Population from the 2020 Census: 1,705 people
- Jump to TripAdvisor's Tourism page for North Judson <3>
- San Pierre
(4 miles [6.4 km] to the west)
- Denham
(5 miles [8 km] to the southeast)
- Jump to our Gazetteer entry for Denham
- Denham is located in Pulaski County
- Aldine
(6 miles [9.7 km] to the east)
- Jump to our Gazetteer entry for Aldine
- Aldine is located in Starke County
- Toto
(6 miles [9.7 km] to the northeast)
- Jump to our Gazetteer entry for Toto
- Toto is located in Starke County
- Medaryville
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Medaryville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Medaryville
- Medaryville is located in Pulaski County
- Population from the 2020 Census: 567 people
- Jump to TripAdvisor's Tourism page for Medaryville <3>
- La Crosse
(9 miles [14.5 km] to the northwest)
- Tefft
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Tefft have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tefft
- Tefft is located in Jasper County
- Bass Lake
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Bass Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bass Lake
- Bass Lake is located in Starke County
- Knox
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Knox have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Knox
- Knox is located in Starke County
- Population from the 2020 Census: 3,552 people
- Jump to TripAdvisor's Tourism page for Knox <3>
- Beardstown
(11 miles [17.7 km] to the southeast)
- Jump to our Gazetteer entry for Beardstown
- Beardstown is located in Pulaski County
- Ora
(12 miles [19.3 km] to the east)
- Jump to our Gazetteer entry for Ora
- Ora is located in Starke County
- Wheatfield
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for Wheatfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wheatfield
- Wheatfield is located in Jasper County
- Population from the 2020 Census: 880 people
- Jump to TripAdvisor's Tourism page for Wheatfield <3>
- Winamac
(14 miles [22.5 km] to the southeast)
- Ober
(14 miles [22.5 km] to the east)
- Jump to our Gazetteer entry for Ober
- Ober is located in Starke County
- Hanna
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Hanna have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hanna
- Hanna is located in LaPorte County
- Jump to TripAdvisor's Tourism page for Hanna <3>
- Kouts
(14 miles [22.5 km] to the northwest)
- Francesville
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Francesville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Francesville
- Francesville is located in Pulaski County
- Population from the 2020 Census: 794 people
- Jump to TripAdvisor's Tourism page for Francesville <3>
- Gifford
(16 miles [25.7 km] to the southwest)
- Jump to our Gazetteer entry for Gifford
- Gifford is located in Jasper County
- Wanatah
(16 miles [25.7 km] to the north)
- Note: The GPS coordinates that we are using for Wanatah have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wanatah
- Wanatah is located in LaPorte County
- Population from the 2020 Census: 999 people
- Jump to TripAdvisor's Tourism page for Wanatah <3>
- Monterey
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Monterey have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Monterey
- Monterey is located in Pulaski County
- Population from the 2020 Census: 200 people
- Hamlet
(16 miles [25.7 km] to the northeast)
- Stoutsburg
(16 miles [25.7 km] to the west)
- Jump to our Gazetteer entry for Stoutsburg
- Stoutsburg is located in Jasper County
- Aylesworth
(18 miles [29 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Aylesworth. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Aylesworth
- Aylesworth is located in Porter County
- Haskell
(19 miles [30.6 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Haskell. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Haskell
- Haskell is located in LaPorte County
- Lake Bruce
(19 miles [30.6 km] to the southeast)
- Jump to our Gazetteer entry for Lake Bruce
- Lake Bruce is located in Fulton County
- Culver
(19 miles [30.6 km] to the east)
- Note: The GPS coordinates that we are using for Culver have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Culver
- Culver is located in Marshall County
- Population from the 2020 Census: 1,484 people
- Grovertown
(19 miles [30.6 km] to the northeast)
- Jump to our Gazetteer entry for Grovertown
- Grovertown is located in Starke County
- Kingsford Heights
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Kingsford Heights have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingsford Heights
- Kingsford Heights is located in LaPorte County
- Population from the 2020 Census: 1,379 people
- Union Mills
(19 miles [30.6 km] to the north)
- Note: The GPS coordinates that we are using for Union Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Union Mills
- Union Mills is located in LaPorte County
- Jump to TripAdvisor's Tourism page for Union Mills <3>
Off-the-Road Links ...
The official website for State of Indiana: https://www.in.gov
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the St. Thomas Cemetery. The point we use is located at these GPS coordinates - Latitude: 41.2042, Longitude: -86.7972 In this case, the coordinates for the St. Thomas Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|