|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the St. Joseph Hill Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the St. Joseph Hill Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the St. Joseph Hill Cemetery. We've listed the following communities based on their distance, with the closest first.
- Bennettsville
(Less than 2 miles to the north)
- Sellersburg
(2 miles [3.2 km] to the east)
- Note: The GPS coordinates that we are using for Sellersburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sellersburg
- Sellersburg is located in Clark County
- Population from the 2020 Census: 9,047 people
- Jump to TripAdvisor's Tourism page for Sellersburg <3>
- Speed
(2 miles [3.2 km] to the east)
- Wilson
(3 miles [4.8 km] to the northwest)
- Slatecut
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Slatecut have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Slatecut
- Slatecut is located in Clark County
- Blackiston Village
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Blackiston Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Blackiston Village
- Blackiston Village is located in Clark County
- Clarksville
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Clarksville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clarksville
- Clarksville is located in Clark County
- Population from the 2020 Census: 21,447 people
- Jump to TripAdvisor's Tourism page for Clarksville <3>
- Broom Hill
(5 miles [8 km] to the northwest)
- Starlight
(5 miles [8 km] to the west)
- Floyds Knobs
(6 miles [9.7 km] to the southwest)
- Watson
(6 miles [9.7 km] to the southeast)
- Prather
(6 miles [9.7 km] to the east)
- Memphis
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Memphis have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Memphis
- Memphis is located in Clark County
- Jump to TripAdvisor's Tourism page for Memphis <3>
- New Albany
(7 miles [11.3 km] to the south)
- New Providence
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for New Providence came from an uncertain source and they still need to be verified:<5>
- Jump to our Gazetteer entry for New Providence
- New Providence is located in Clark County
- Galena
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Galena have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Galena
- Galena is located in Floyd County
- Jeffersonville
(8 miles [12.9 km] to the southeast)
- Oak Park
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Oak Park have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Park
- Oak Park is located in Clark County
- Charlestown
(8 miles [12.9 km] to the northeast)
- Arctic Springs
(9 miles [14.5 km] to the southeast)
- Utica
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Utica have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Utica
- Utica is located in Clark County
- Population from the 2020 Census: 996 people
- Harmony Village
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Harmony Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harmony Village
- Harmony Village is located in Oldham County (KY)
- Borden
(9 miles [14.5 km] to the northwest)
- Greenville
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Greenville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greenville
- Greenville is located in Floyd County
- Population from the 2020 Census: 1,115 people
- Jump to TripAdvisor's Tourism page for Greenville <3>
- Parkland
(10 miles [16.1 km] to the south)
- Clifton
(10 miles [16.1 km] to the southeast)
- Glenview
(10 miles [16.1 km] to the southeast)
- Harrods Creek
(10 miles [16.1 km] to the southeast)
- Prospect
(10 miles [16.1 km] to the east)
- River Bluff
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for River Bluff have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for River Bluff
- River Bluff is located in Oldham County (KY)
- Population from the 2020 Census: 442 people
- Henryville
(10 miles [16.1 km] to the north)
Off-the-Road Links ...
The official website for Clark County: www.co.clark.in.us/ The official website for State of Indiana: https://www.in.gov
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the St. Joseph Hill Cemetery. The point we use is located at these GPS coordinates - Latitude: 38.3987, Longitude: -85.8021 |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database. |
|
|