|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Kirk - McRoberts Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Kirk - McRoberts Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Kirk - McRoberts Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Patoka
(4 miles [6.4 km] to the west)
- Jump to our Gazetteer entry for Patoka
- Patoka is located in Gibson County
- Population from the 2020 Census: 784 people
- Union
(4 miles [6.4 km] to the northeast)
- Jump to our Gazetteer entry for Union
- Union is located in Pike County
- Princeton
(5 miles [8 km] to the southwest)
- Oatsville
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for Oatsville
- Oatsville is located in Pike County
- Hazleton
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Hazleton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hazleton
- Hazleton is located in Gibson County
- Population from the 2020 Census: 267 people
- Jump to TripAdvisor's Tourism page for Hazleton <2>
- Decker
(6 miles [9.7 km] to the north)
- Jump to our Gazetteer entry for Decker
- Decker is located in Knox County
- Population from the 2020 Census: 244 people
- Douglas
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Douglas have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Douglas
- Douglas is located in Gibson County
- Francisco
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Francisco have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Francisco
- Francisco is located in Gibson County
- Population from the 2020 Census: 558 people
- Giro
(6 miles [9.7 km] to the north)
- Jump to our Gazetteer entry for Giro
- Giro is located in Gibson County
- Dongola
(9 miles [14.5 km] to the east)
- Jump to our Gazetteer entry for Dongola
- Dongola is located in Gibson County
- Oakland City
(10 miles [16.1 km] to the southeast)
- Glezen
(10 miles [16.1 km] to the east)
- Jump to our Gazetteer entry for Glezen
- Glezen is located in Pike County
- Somerville
(11 miles [17.7 km] to the southeast)
- Willis
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Willis have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Willis
- Willis is located in Knox County
- Fort Branch
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Fort Branch have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Branch
- Fort Branch is located in Gibson County
- Population from the 2020 Census: 2,775 people
- Jump to TripAdvisor's Tourism page for Fort Branch <2>
- Oakland City Junction
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Oakland City Junction have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oakland City Junction
- Oakland City Junction is located in Pike County
- Petersburg
(12 miles [19.3 km] to the east)
- Jump to our Gazetteer entry for Petersburg
- Petersburg is located in Pike County
- Population from the 2020 Census: 2,299 people
- Beal
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Beal have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beal
- Beal is located in Knox County
- Mackey
(13 miles [20.9 km] to the southeast)
- Jump to our Gazetteer entry for Mackey
- Mackey is located in Gibson County
- Population from the 2020 Census: 134 people
- Allendale
(13 miles [20.9 km] to the northwest)
- Owensville
(14 miles [22.5 km] to the southwest)
- Buckskin
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Buckskin have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buckskin
- Buckskin is located in Gibson County
- Alford
(14 miles [22.5 km] to the east)
- Jump to our Gazetteer entry for Alford
- Alford is located in Pike County
- Saint Francisville
(14 miles [22.5 km] to the northwest)
- Adams Corner
(14 miles [22.5 km] to the northwest)
- Jump to our Gazetteer entry for Adams Corner
- Adams Corner is located in Wabash County (IL)
- Patton
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Patton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Patton
- Patton is located in Wabash County (IL)
- Mount Carmel
(14 miles [22.5 km] to the west)
Off-the-Road Links ...
The official website for State of Indiana: https://www.in.gov
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Kirk - McRoberts Cemetery. The point we use is located at these GPS coordinates - Latitude: 38.4237, Longitude: -87.4997 In this case, the coordinates for the Kirk - McRoberts Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|