|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the IOOF Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the IOOF Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the IOOF Cemetery. We've listed the following communities based on their distance, with the closest first.
- Dunkirk
(Less than 2 miles to the southeast)
- Note: The GPS coordinates that we are using for Dunkirk have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dunkirk
- Dunkirk is located in Jay County
- Population from the 2020 Census: 2,249 people
- Jump to TripAdvisor's Tourism page for Dunkirk <3>
- Ridertown
(3 miles [4.8 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Ridertown. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Ridertown
- Ridertown is located in Blackford County
- Millgrove
(3 miles [4.8 km] to the northwest)
- Jump to our Gazetteer entry for Millgrove
- Millgrove is located in Blackford County
- Redkey
(4 miles [6.4 km] to the southeast)
- Albany
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Albany have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Albany
- Albany is located in Delaware County
- Population from the 2020 Census: 2,136 people
- Jump to TripAdvisor's Tourism page for Albany <3>
- Greene
(6 miles [9.7 km] to the east)
- Jump to our Gazetteer entry for Greene
- Greene is located in Jay County
- Eaton
(7 miles [11.3 km] to the west)
- Granville
(7 miles [11.3 km] to the southwest)
- Jump to our Gazetteer entry for Granville
- Granville is located in Delaware County
- Former name for Granville:
- Weaton
- Pony
(7 miles [11.3 km] to the northeast)
- Jump to our Gazetteer entry for Pony
- Pony is located in Jay County
- Blaine
(8 miles [12.9 km] to the east)
- Jump to our Gazetteer entry for Blaine
- Blaine is located in Jay County
- Pennville
(8 miles [12.9 km] to the northeast)
- Mollie ‑ Historic
(9 miles [14.5 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Mollie. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Mollie
- Mollie is located in Blackford County
- Hartford City
(9 miles [14.5 km] to the northwest)
- Desoto
(10 miles [16.1 km] to the southwest)
- Jump to our Gazetteer entry for Desoto
- Desoto is located in Delaware County
- Ridgeville
(11 miles [17.7 km] to the southeast)
- Jump to our Gazetteer entry for Ridgeville
- Ridgeville is located in Randolph County
- Population from the 2020 Census: 734 people
- Collett
(11 miles [17.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Collett. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Collett
- Collett is located in Jay County
- Shamrock Lakes
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Shamrock Lakes have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shamrock Lakes
- Shamrock Lakes is located in Blackford County
- Population from the 2020 Census: 217 people
- Montpelier
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Montpelier have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Montpelier
- Montpelier is located in Blackford County
- Population from the 2020 Census: 1,666 people
- Jump to TripAdvisor's Tourism page for Montpelier <3>
- Bluff Point
(12 miles [19.3 km] to the east)
- Jump to our Gazetteer entry for Bluff Point
- Bluff Point is located in Jay County
- Portland
(12 miles [19.3 km] to the east)
- Fiat
(12 miles [19.3 km] to the north)
- Jump to our Gazetteer entry for Fiat
- Fiat is located in Jay County
- Renner ‑ Historic
(12 miles [19.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Renner. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Renner
- Renner is located in Blackford County
- Selma
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Selma have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Selma
- Selma is located in Delaware County
- Population from the 2020 Census: 806 people
- Jump to TripAdvisor's Tourism page for Selma <3>
- Parker City
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Parker City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parker City
- Parker City is located in Randolph County
- Population from the 2020 Census: 1,319 people
- Jump to TripAdvisor's Tourism page for Parker City <3>
- Liberty Corners
(14 miles [22.5 km] to the southwest)
- Jump to our Gazetteer entry for Liberty Corners
- Liberty Corners is located in Delaware County
- Farmland
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Farmland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Farmland
- Farmland is located in Randolph County
- Population from the 2020 Census: 1,224 people
- Jump to TripAdvisor's Tourism page for Farmland <3>
- Stone
(14 miles [22.5 km] to the southeast)
- Jump to our Gazetteer entry for Stone
- Stone is located in Randolph County
- Antiville
(14 miles [22.5 km] to the northeast)
- Jump to our Gazetteer entry for Antiville
- Antiville is located in Jay County
- Phenix
(14 miles [22.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Phenix. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Phenix
- Phenix is located in Wells County
- Nottingham
(14 miles [22.5 km] to the north)
- Jump to our Gazetteer entry for Nottingham
- Nottingham is located in Wells County
- Matthews
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Matthews have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Matthews
- Matthews is located in Grant County
- Population from the 2020 Census: 553 people
- Keystone
(14 miles [22.5 km] to the north)
- Jump to our Gazetteer entry for Keystone
- Keystone is located in Wells County
Off-the-Road Links ...
The official website for Blackford County: www.blackfordcounty.com/ The official website for State of Indiana: https://www.in.gov
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the IOOF Cemetery. The point we use is located at these GPS coordinates - Latitude: 40.3823, Longitude: -85.2147 In this case, the coordinates for the IOOF Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|