|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Beard had a post office and no railroad service.
The following communities are listed based on their distance from Beard, with the one closest to Beard listed first.
- Geetingsville
(3 miles [4.8 km] to the north)
- Moran
(3 miles [4.8 km] to the west)
- Note: The GPS coordinates that we are using for Moran have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moran
- Moran is located in Clinton County
- Avery
(4 miles [6.4 km] to the south)
- Note: The GPS coordinates that we are using for Avery have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Avery
- Avery is located in Clinton County
- Michigantown
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Michigantown have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Michigantown
- Michigantown is located in Clinton County
- Population from the 2020 Census: 448 people
- Jump to TripAdvisor's Tourism page for Michigantown <4>
- Middlefork
(4 miles [6.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Middlefork. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Middlefork
- Middlefork is located in Clinton County
- Google driving directions:
- From your current location to Middlefork
- From Beard to Middlefork
- Sedalia
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Sedalia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sedalia
- Sedalia is located in Clinton County
- Cambria
(5 miles [8 km] to the west)
- Boyleston
(6 miles [9.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Boyleston. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Boyleston
- Boyleston is located in Clinton County
- Google driving directions:
- From your current location to Boyleston
- From Beard to Boyleston
- Forest
(6 miles [9.7 km] to the east)
- Frankfort
(7 miles [11.3 km] to the southwest)
- Burlington
(7 miles [11.3 km] to the north)
- Hillisburg
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Hillisburg have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hillisburg
- Hillisburg is located in Clinton County
- Cutler
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Cutler have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cutler
- Cutler is located in Carroll County
- Shanghai
(8 miles [12.9 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Shanghai. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Shanghai
- Shanghai is located in Howard County
- Google driving directions:
- From your current location to Shanghai
- From Beard to Shanghai
- Rossville
(8 miles [12.9 km] to the west)
- Jefferson
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Jefferson have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Jefferson
- Jefferson is located in Clinton County
- Scircleville
(9 miles [14.5 km] to the southeast)
- Russiaville
(9 miles [14.5 km] to the east)
- Cyclone
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for Cyclone have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cyclone
- Cyclone is located in Clinton County
- New London
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for New London have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New London
- New London is located in Howard County
- Manson
(11 miles [17.7 km] to the southwest)
- Bringhurst
(11 miles [17.7 km] to the north)
- Ridgeway
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Ridgeway have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ridgeway
- Ridgeway is located in Howard County
- Owasco
(11 miles [17.7 km] to the northwest)
- Edna Mills
(11 miles [17.7 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Edna Mills. Although the coordinates have been estimated, they should be in the vicinity.<2>
- Jump to our Gazetteer entry for Edna Mills
- Edna Mills is located in Clinton County
- Google driving directions:
- From your current location to Edna Mills
- From Beard to Edna Mills
- Mulberry
(11 miles [17.7 km] to the west)
Off-the-Road Links ...
The official website for State of Indiana: https://www.in.gov
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Beard, please let us know so that we can improve our accuracy. |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|