Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Wanborough in the Atlas, the following communities of the 1890's would have been found near the current location of Wanborough. The following communities are listed based on their distance, with the one closest to Wanborough listed first.
- Albion
(Less than 2 miles to the east)
- Note: The GPS coordinates that we are using for Albion have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Albion
- Albion is located in Edwards County
- Population from the 2020 Census: 1,889 people
- Jump to TripAdvisor's Tourism page for Albion <3>
- Ellery
(3 miles [4.8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Ellery. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Ellery
- Ellery is located in Edwards County
- Jump to TripAdvisor's Tourism page for Ellery <3>
- Red Top
(3 miles [4.8 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Red Top. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Red Top
- Red Top is located in Edwards County
- Browns
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Browns have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Browns
- Browns is located in Edwards County
- Population from the 2020 Census: 128 people
- Jump to TripAdvisor's Tourism page for Browns <3>
- Golden Gate
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Golden Gate have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Golden Gate
- Golden Gate is located in Wayne County
- Population from the 2020 Census: 65 people
- Jump to TripAdvisor's Tourism page for Golden Gate <3>
- Bone Gap
(7 miles [11.3 km] to the northeast)
- Samsville
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Samsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Samsville
- Samsville is located in Edwards County
- Grayville
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Grayville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grayville
- Grayville is located in White County
- Population from the 2020 Census: 1,543 people
- Jump to TripAdvisor's Tourism page for Grayville <3>
- Cowling
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Cowling have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cowling
- Cowling is located in Wabash County
- Bellmont
(9 miles [14.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Bellmont. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Bellmont
- Bellmont is located in Wabash County
- Population from the 2020 Census: 260 people
- Jump to TripAdvisor's Tourism page for Bellmont <3>
- Maple Grove
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Maple Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maple Grove
- Maple Grove is located in Edwards County
- Mills Prairie ‑ Historic
(10 miles [16.1 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Mills Prairie. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Mills Prairie
- Mills Prairie is located in Edwards County
- West Salem
(10 miles [16.1 km] to the northeast)
- Jump to our Gazetteer entry for West Salem
- West Salem is located in Edwards County
- Population from the 2020 Census: 844 people
- Merriam
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Merriam have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Merriam
- Merriam is located in Wayne County
- Gards Point
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Gards Point have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gards Point
- Gards Point is located in Wabash County
- Burnt Prairie
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Burnt Prairie have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burnt Prairie
- Burnt Prairie is located in White County
- Population from the 2020 Census: 47 people
- Jump to TripAdvisor's Tourism page for Burnt Prairie <3>
- Calvin
(12 miles [19.3 km] to the south)
- Jump to our Gazetteer entry for Calvin
- Calvin is located in White County
- Keensburg
(12 miles [19.3 km] to the east)
- Maud
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Maud have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maud
- Maud is located in Wabash County
- Mount Erie
(12 miles [19.3 km] to the northwest)
- Hubbard
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Hubbard have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hubbard
- Hubbard is located in Wayne County
- Parkersburg
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Parkersburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parkersburg
- Parkersburg is located in Richland County
- Population from the 2020 Census: 201 people
- Jump to TripAdvisor's Tourism page for Parkersburg <3>
- Fairfield
(14 miles [22.5 km] to the west)
- Crossville
(15 miles [24.1 km] to the south)
- Note: The GPS coordinates that we are using for Crossville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crossville
- Crossville is located in White County
- Population from the 2020 Census: 687 people
- Jump to TripAdvisor's Tourism page for Crossville <3>
- Griffin
(15 miles [24.1 km] to the southeast)
- Jump to our Gazetteer entry for Griffin
- Griffin is located in Posey County (IN)
- Population from the 2020 Census: 167 people
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Wanborough. If you can help, please contact us through our Feedback Page.
The official website for State of Illinois: https://illinois.gov
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Wanborough, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |