RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Illinois >> Macoupin County >> Standard City >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Illinois


The Commemorative Quarter for Illinois







Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Standard City (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Standard City. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most hospitals were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Standard City is located in Macoupin County.

To see how the shape of Illinois' counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Macoupin County: Greene, Jersey, Madison, Montgomery, Morgan & Sangamon.

Below are the counties that are near Standard City. For each of these counties, we show a sample of those communities that are closest to Standard City:

  • Macoupin County     (The home county of Standard City)
    • The following are listed by their distance from Standard City, with the one closest to Standard City listed first.
    • Nilwood
      (3 miles [4.8 km] to the north)
      • Note: The GPS coordinates that we are using for Nilwood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Nilwood
      • Nilwood is located in Macoupin County
      • Population from the 2020 Census: 227 people
      • Jump to TripAdvisor's Tourism page for Nilwood <2>
    • Girard
      (6 miles [9.7 km] to the north)
    • Carlinville
      (6 miles [9.7 km] to the southwest)
    • Virden
      (10 miles [16.1 km] to the north)
    • Comer
      (10 miles [16.1 km] to the southwest)
      • Note: We haven't been able to verify our GPS coordinates for Comer. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Comer
      • Comer is located in Macoupin County
      • Google driving directions:
      • From your current location to Comer
      • From Standard City to Comer
    • Palmyra
      (12 miles [19.3 km] to the northwest)
    • Hornsby
      (12 miles [19.3 km] to the south)
    • Modesto
      (13 miles [20.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for Modesto have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Modesto
      • Modesto is located in Macoupin County
      • Population from the 2020 Census: 180 people
      • Jump to TripAdvisor's Tourism page for Modesto <2>
    • Hettick
      (13 miles [20.9 km] to the west)
      • Note: The GPS coordinates that we are using for Hettick have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hettick
      • Hettick is located in Macoupin County
      • Population from the 2020 Census: 171 people
      • Jump to TripAdvisor's Tourism page for Hettick <2>
    • East Gillespie
      (14 miles [22.5 km] to the south)
      • Note: The GPS coordinates that we are using for East Gillespie have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for East Gillespie
      • East Gillespie is located in Macoupin County
      • Population from the 2020 Census: 259 people
    • Gillespie
      (15 miles [24.1 km] to the south)
    • Hagaman
      (15 miles [24.1 km] to the west)
      • Note: We haven't been able to verify our GPS coordinates for Hagaman. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Hagaman
      • Hagaman is located in Macoupin County
      • Google driving directions:
      • From your current location to Hagaman
      • From Standard City to Hagaman
    • Chesterfield
      (16 miles [25.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Chesterfield have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chesterfield
      • Chesterfield is located in Macoupin County
      • Population from the 2020 Census: 175 people
      • Jump to TripAdvisor's Tourism page for Chesterfield <2>
  • Bond County
  • Christian County
    • The following are listed by their distance from Standard City, with the one closest to Standard City listed first.
    • Morrisonville
      (18 miles [29 km] to the east)
    • Zenobia
      (18 miles [29 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Zenobia. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Zenobia
      • Zenobia is located in Christian County
      • Google driving directions:
      • From your current location to Zenobia
      • From Standard City to Zenobia
    • Palmer
      (21 miles [33.8 km] to the east)
      • Note: The GPS coordinates that we are using for Palmer have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Palmer
      • Palmer is located in Christian County
      • Population from the 2020 Census: 204 people
      • Jump to TripAdvisor's Tourism page for Palmer <2>
    • Clarksdale
      (24 miles [38.6 km] to the northeast)
    • Tovey
      (24 miles [38.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Tovey have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Tovey
      • Tovey is located in Christian County
      • Population from the 2020 Census: 467 people
      • Jump to TripAdvisor's Tourism page for Tovey <2>
    • Bulpitt
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Bulpitt have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bulpitt
      • Bulpitt is located in Christian County
      • Population from the 2020 Census: 199 people
      • Jump to TripAdvisor's Tourism page for Bulpitt <2>
    • Jeisyville
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Jeisyville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jeisyville
      • Jeisyville is located in Christian County
      • Population from the 2020 Census: 100 people
    • Kincaid
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Kincaid have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kincaid
      • Kincaid is located in Christian County
      • Population from the 2020 Census: 1,362 people
      • Jump to TripAdvisor's Tourism page for Kincaid <2>
    • Edinburg
      (29 miles [46.7 km] to the northeast)
    • Sharpsburg
      (29 miles [46.7 km] to the northeast)
    • Taylorville
      (29 miles [46.7 km] to the northeast)
  • Greene County
    • The following are listed by their distance from Standard City, with the one closest to Standard City listed first.
    • Greenfield
      (22 miles [35.4 km] to the west)
      • Note: The GPS coordinates that we are using for Greenfield have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Greenfield
      • Greenfield is located in Greene County
      • Population from the 2020 Census: 965 people
      • Jump to TripAdvisor's Tourism page for Greenfield <2>
    • Rockbridge
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for Rockbridge have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rockbridge
      • Rockbridge is located in Greene County
      • Population from the 2020 Census: 154 people
      • Jump to TripAdvisor's Tourism page for Rockbridge <2>
    • Wrights
      (27 miles [43.5 km] to the west)
      • Note: The GPS coordinates that we are using for Wrights have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Wrights
      • Wrights is located in Greene County
      • Jump to TripAdvisor's Tourism page for Wrights <2>
  • Jersey County
    • Fidelity
      (24 miles [38.6 km] to the southwest)
  • Madison County
    • The following are listed by their distance from Standard City, with the one closest to Standard City listed first.
    • Williamson
      (25 miles [40.2 km] to the south)
      • Note: The GPS coordinates that we are using for Williamson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Williamson
      • Williamson is located in Madison County
      • Population from the 2020 Census: 212 people
      • Jump to TripAdvisor's Tourism page for Williamson <2>
    • Livingston
      (26 miles [41.8 km] to the south)
      • Note: The GPS coordinates that we are using for Livingston have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Livingston
      • Livingston is located in Madison County
      • Population from the 2020 Census: 796 people
      • Jump to TripAdvisor's Tourism page for Livingston <2>
    • New Douglas
      (27 miles [43.5 km] to the south)
    • Prairietown
      (27 miles [43.5 km] to the south)
    • Dorsey
      (28 miles [45.1 km] to the southwest)
    • Worden
      (29 miles [46.7 km] to the south)
  • Montgomery County
    • The following are listed by their distance from Standard City, with the one closest to Standard City listed first.
    • Waggoner
      (7 miles [11.3 km] to the east)
    • Farmersville
      (9 miles [14.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Farmersville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Farmersville
      • Farmersville is located in Montgomery County
      • Population from the 2020 Census: 662 people
      • Jump to TripAdvisor's Tourism page for Farmersville <2>
    • Shop Creek
      (9 miles [14.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Shop Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shop Creek
      • Shop Creek is located in Montgomery County
    • Honey Bend
      (10 miles [16.1 km] to the southeast)
    • Raymond
      (11 miles [17.7 km] to the east)
    • Harvel
      (13 miles [20.9 km] to the east)
      • Note: The GPS coordinates that we are using for Harvel have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Harvel
      • Harvel is located in Montgomery County
      • Population from the 2020 Census: 210 people
      • Jump to TripAdvisor's Tourism page for Harvel <2>
    • Litchfield
      (13 miles [20.9 km] to the southeast)
    • White Oak
      (15 miles [24.1 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for White Oak. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for White Oak
      • White Oak is located in Montgomery County
      • Google driving directions:
      • From your current location to White Oak
      • From Standard City to White Oak
    • Butler
      (17 miles [27.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Butler have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Butler
      • Butler is located in Montgomery County
      • Population from the 2020 Census: 163 people
      • Jump to TripAdvisor's Tourism page for Butler <2>
    • Hillsboro
      (20 miles [32.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Hillsboro have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hillsboro
      • Hillsboro is located in Montgomery County
      • Population from the 2020 Census: 5,909 people
      • Jump to TripAdvisor's Tourism page for Hillsboro <2>
    • Schram City
      (21 miles [33.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Schram City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Schram City
      • Schram City is located in Montgomery County
      • Population from the 2020 Census: 542 people
    • Taylor Springs
      (21 miles [33.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Taylor Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Taylor Springs
      • Taylor Springs is located in Montgomery County
      • Population from the 2020 Census: 650 people
      • Jump to TripAdvisor's Tourism page for Taylor Springs <2>
    • Walshville
      (21 miles [33.8 km] to the southeast)
  • Morgan County
    • The following are listed by their distance from Standard City, with the one closest to Standard City listed first.
    • Waverly
      (18 miles [29 km] to the northwest)
      • Note: The GPS coordinates that we are using for Waverly have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Waverly
      • Waverly is located in Morgan County
      • Population from the 2020 Census: 1,182 people
      • Jump to TripAdvisor's Tourism page for Waverly <2>
    • Franklin
      (23 miles [37 km] to the northwest)
      • Note: The GPS coordinates that we are using for Franklin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Franklin
      • Franklin is located in Morgan County
      • Population from the 2020 Census: 591 people
      • Jump to TripAdvisor's Tourism page for Franklin <2>
    • Pisgah
      (28 miles [45.1 km] to the northwest)
      • Note: We haven't been able to verify our GPS coordinates for Pisgah. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Pisgah
      • Pisgah is located in Morgan County
      • Google driving directions:
      • From your current location to Pisgah
      • From Standard City to Pisgah
    • Alexander
      (29 miles [46.7 km] to the northwest)
    • Murrayville
      (29 miles [46.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Murrayville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Murrayville
      • Murrayville is located in Morgan County
      • Population from the 2020 Census: 541 people
      • Jump to TripAdvisor's Tourism page for Murrayville <2>
    • Woodson
      (30 miles [48.3 km] to the northwest)
  • Sangamon County
    • The following are listed by their distance from Standard City, with the one closest to Standard City listed first.
    • Thayer
      (13 miles [20.9 km] to the north)
      • Note: The GPS coordinates that we are using for Thayer have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Thayer
      • Thayer is located in Sangamon County
      • Population from the 2020 Census: 651 people
      • Jump to TripAdvisor's Tourism page for Thayer <2>
    • Lowder
      (14 miles [22.5 km] to the north)
      • Note: The GPS coordinates that we are using for Lowder have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lowder
      • Lowder is located in Sangamon County
      • Jump to TripAdvisor's Tourism page for Lowder <2>
    • Auburn
      (16 miles [25.7 km] to the north)
    • Divernon
      (16 miles [25.7 km] to the northeast)
    • Commanche Village
      (18 miles [29 km] to the northeast)
      • Note: The GPS coordinates that we are using for Commanche Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Commanche Village
      • Commanche Village is located in Sangamon County
    • Pawnee
      (19 miles [30.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Pawnee have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pawnee
      • Pawnee is located in Sangamon County
      • Population from the 2020 Census: 2,646 people
      • Jump to TripAdvisor's Tourism page for Pawnee <2>
    • Glenarm
      (20 miles [32.2 km] to the north)
    • Maxwell ‑ Historic
      (21 miles [33.8 km] to the north)
      • Note: We haven't been able to verify our GPS coordinates for Maxwell. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Maxwell
      • Maxwell is located in Sangamon County
      • Google driving directions:
      • From your current location to Maxwell
      • From Standard City to Maxwell
    • Chatham
      (22 miles [35.4 km] to the north)
      • Note: The GPS coordinates that we are using for Chatham have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Chatham
      • Chatham is located in Sangamon County
      • Population from the 2020 Census: 13,159 people
      • Jump to TripAdvisor's Tourism page for Chatham <2>
    • Loami
      (22 miles [35.4 km] to the north)
      • Note: The GPS coordinates that we are using for Loami have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Loami
      • Loami is located in Sangamon County
      • Population from the 2020 Census: 751 people
      • Jump to TripAdvisor's Tourism page for Loami <2>
    • New City
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for New City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New City
      • New City is located in Sangamon County
    • Curran
      (26 miles [41.8 km] to the north)
      • Note: The GPS coordinates that we are using for Curran have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Curran
      • Curran is located in Sangamon County
      • Population from the 2020 Census: 206 people
    • New Berlin
      (26 miles [41.8 km] to the north)
      • Note: The GPS coordinates that we are using for New Berlin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Berlin
      • New Berlin is located in Sangamon County
      • Population from the 2020 Census: 1,329 people
      • Jump to TripAdvisor's Tourism page for New Berlin <2>

For an expanded list of the communities that are closest to Standard City, see our County-by-County Page for Standard City.

Cemeteries Near Standard City ...

Below are cemeteries that are in the vicinity of Standard City.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Standard City covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Standard City, with the one closest to Standard City listed first.

  • Yowell Cemetery
    (Less than 2 miles to the east)
    • Jump to our Gazetteer entry for the Yowell Cemetery
    • Note: The GPS coordinates that we are using for the Yowell Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Anderson Cemetery
    (3 miles [4.8 km] to the west)
    • Jump to our Gazetteer entry for the Anderson Cemetery
    • Note: The GPS coordinates that we are using for the Anderson Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Moore Cemetery
    (3 miles [4.8 km] to the southwest)
    • Jump to our Gazetteer entry for the Moore Cemetery
    • Note: The GPS coordinates that we are using for the Moore Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Sulphur Spring Cemetery
    (3 miles [4.8 km] to the east)
    • Jump to our Gazetteer entry for the Sulphur Spring Cemetery
    • Note: The GPS coordinates that we are using for the Sulphur Spring Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Gray Family Cemetery
    (4 miles [6.4 km] to the south)
    • Jump to our Gazetteer entry for the Gray Family Cemetery
    • Note: The GPS coordinates that we are using for the Gray Family Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Rural Methodist Cemetery
    (4 miles [6.4 km] to the south)
    • Jump to our Gazetteer entry for the Rural Methodist Cemetery
    • Note: The GPS coordinates that we are using for the Rural Methodist Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Bethel Ridge Cemetery
    (4 miles [6.4 km] to the southeast)
    • Jump to our Gazetteer entry for the Bethel Ridge Cemetery
    • Note: The GPS coordinates that we are using for the Bethel Ridge Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Providence Cemetery
    (4 miles [6.4 km] to the east)
    • Jump to our Gazetteer entry for the Providence Cemetery
    • Note: The GPS coordinates that we are using for the Providence Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Ross Cemetery
    (5 miles [8 km] to the northwest)
    • Jump to our Gazetteer entry for the Ross Cemetery
    • Note: The GPS coordinates that we are using for the Ross Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Welton Cemetery
    (5 miles [8 km] to the northwest)
    • Jump to our Gazetteer entry for the Welton Cemetery
    • Note: The GPS coordinates that we are using for the Welton Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Dugger Cemetery
    (6 miles [9.7 km] to the southwest)
    • Jump to our Gazetteer entry for the Dugger Cemetery
    • Note: The GPS coordinates that we are using for the Dugger Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • New Calvary Cemetery
    (6 miles [9.7 km] to the southwest)
    • Jump to our Gazetteer entry for the New Calvary Cemetery
    • Note: The GPS coordinates that we are using for the New Calvary Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
  • Continue List   (355 more) ...
    • Mayfield Memorial Park
      (6 miles [9.7 km] to the southwest)
      • Jump to our Gazetteer entry for the Mayfield Memorial Park
      • Note: The GPS coordinates that we are using for the Mayfield Memorial Park have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Girard Cemetery
      (6 miles [9.7 km] to the north)
      • Jump to our Gazetteer entry for the Girard Cemetery
      • Note: The GPS coordinates that we are using for the Girard Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Girard City Cemetery
      (6 miles [9.7 km] to the north)
      • Jump to our Gazetteer entry for the Girard City Cemetery
      • Note: The GPS coordinates that we are using for the Girard City Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<4>

While we didn't find Standard City in the Atlas, the following 1895 communities would have been found near the current location of Standard City.

These communities are listed based on their distance from Standard City, with the one closest to Standard City listed first.

  • Nilwood
    (3 miles [4.8 km] to the north)
    • Note: The GPS coordinates that we are using for Nilwood have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Nilwood
    • Nilwood is located in Macoupin County
    • Population from the 2020 Census: 227 people
    • Jump to TripAdvisor's Tourism page for Nilwood <2>
  • Atwater
    (3 miles [4.8 km] to the east)
    • Note: The GPS coordinates that we are using for Atwater have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Atwater
    • Atwater is located in Macoupin County
    • Jump to TripAdvisor's Tourism page for Atwater <2>
  • McVey
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for McVey have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for McVey
    • McVey is located in Macoupin County
  • Anderson
    (3 miles [4.8 km] to the west)
    • Note: The GPS coordinates that we are using for Anderson have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Anderson
    • Anderson is located in Macoupin County
  • Carlinville
    (6 miles [9.7 km] to the southwest)
  • Girard
    (6 miles [9.7 km] to the north)
  • Barnett
    (7 miles [11.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Barnett have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Barnett
    • Barnett is located in Montgomery County
  • Zanesville
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for Zanesville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Zanesville
    • Zanesville is located in Montgomery County
  • Waggoner
    (7 miles [11.3 km] to the east)
  • Shop Creek
    (9 miles [14.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Shop Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Shop Creek
    • Shop Creek is located in Montgomery County
  • Farmersville
    (9 miles [14.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Farmersville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Farmersville
    • Farmersville is located in Montgomery County
    • Population from the 2020 Census: 662 people
    • Jump to TripAdvisor's Tourism page for Farmersville <2>
  • Comer
    (10 miles [16.1 km] to the southwest)
    • Note: We haven't been able to verify our GPS coordinates for Comer. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Comer
    • Comer is located in Macoupin County
    • Google driving directions:
    • From your current location to Comer
    • From Standard City to Comer
  • Continue List   (13 more) ...

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Standard City. See our List of 1890's Communities around Standard City.

Newspapers Published in Standard City ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 130 newspapers that have been published in the area around Standard City.

Although we're unaware of any newspapers that were published in the immediate area of Standard City, there are papers which were published within 28 miles [45.1 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Standard City.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Standard City:

Unfortunately, we don't know of a website for Standard City. If you can help, please contact us through our Feedback Page.

The official website for State of Illinois: https://illinois.gov

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Standard City, please let us know so that we can improve our accuracy.
<5>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Standard City) to Point B.Our distance measurements begin at a specific point in Standard City. The point we use is located at these GPS coordinates - Latitude: 39.3513, Longitude: -89.7887    









 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 28 Apr 2025