Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Mattoon had a population of 6,833 people in 1895 with a post office and railroad service. In 2020, Mattoon had a population of 17,513 people.
The following communities are listed based on their distance from Mattoon, with the one closest to Mattoon listed first.
- Loxa
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Loxa have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loxa
- Loxa is located in Coles County
- Coles
(5 miles [8 km] to the northwest)
- Gays
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Gays have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gays
- Gays is located in Moultrie County
- Population from the 2020 Census: 252 people
- Jump to TripAdvisor's Tourism page for Gays <3>
- Paradise
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Paradise have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Paradise
- Paradise is located in Coles County
- Etna
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Etna have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Etna
- Etna is located in Coles County
- Lerna
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Lerna have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lerna
- Lerna is located in Coles County
- Population from the 2020 Census: 274 people
- Jump to TripAdvisor's Tourism page for Lerna <3>
- Cooks Mills
(7 miles [11.3 km] to the north)
- Trilla
(7 miles [11.3 km] to the south)
- Humboldt
(8 miles [12.9 km] to the north)
- Johnstown
(9 miles [14.5 km] to the southeast)
- Sexson Corner
(10 miles [16.1 km] to the southwest)
- Janesville
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Janesville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Janesville
- Janesville is located in Cumberland County
- Jump to TripAdvisor's Tourism page for Janesville <3>
- Campbell
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Campbell have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Campbell
- Campbell is located in Coles County
- Charleston
(10 miles [16.1 km] to the east)
- Allenville
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Allenville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Allenville
- Allenville is located in Moultrie County
- Population from the 2020 Census: 141 people
- Neoga
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Neoga have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Neoga
- Neoga is located in Cumberland County
- Population from the 2020 Census: 1,585 people
- Jump to TripAdvisor's Tourism page for Neoga <3>
- Bruce
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Bruce have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bruce
- Bruce is located in Moultrie County
- Bradbury
(13 miles [20.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Bradbury. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Bradbury
- Bradbury is located in Cumberland County
- Google driving directions:
- From your current location to Bradbury
- From Mattoon to Bradbury
- Trowbridge
(14 miles [22.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Trowbridge. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Trowbridge
- Trowbridge is located in Shelby County
- Google driving directions:
- From your current location to Trowbridge
- From Mattoon to Trowbridge
- Diona
(14 miles [22.5 km] to the southeast)
- Bushton
(14 miles [22.5 km] to the northeast)
- Arcola
(14 miles [22.5 km] to the north)
- Sullivan
(14 miles [22.5 km] to the northwest)
- Chesterville
(15 miles [24.1 km] to the north)
- Strasburg
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Strasburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Strasburg
- Strasburg is located in Shelby County
- Population from the 2020 Census: 435 people
- Jump to TripAdvisor's Tourism page for Strasburg <3>
- Kingman
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Kingman have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingman
- Kingman is located in Shelby County
- Arthur
(16 miles [25.7 km] to the north)
- Toledo
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Toledo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Toledo
- Toledo is located in Cumberland County
- Population from the 2020 Census: 1,185 people
- Jump to TripAdvisor's Tourism page for Toledo <3>
- Hutton
(16 miles [25.7 km] to the east)
- Rardin
(16 miles [25.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Rardin. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rardin
- Rardin is located in Coles County
- Google driving directions:
- From your current location to Rardin
- From Mattoon to Rardin
- Filson
(16 miles [25.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Filson. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Filson
- Filson is located in Douglas County
- Google driving directions:
- From your current location to Filson
- From Mattoon to Filson
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Mattoon. If you can help, please contact us through our Feedback Page.
The official website for Coles County: www.co.coles.il.us/
The official website for State of Illinois: https://illinois.gov
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Mattoon, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |