|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Hamilton Corners in the Atlas, the following communities of the 1890's would have been found near the current location of Hamilton Corners. The following communities are listed based on their distance, with the one closest to Hamilton Corners listed first.
- Denrock
(Less than 2 miles to the southwest)
- Note: The GPS coordinates that we are using for Denrock have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Denrock
- Denrock is located in Whiteside County
- Pratt ‑ Historic
(Less than 2 miles to the southwest)
- Note: The GPS coordinates that we are using for Pratt have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pratt
- Pratt is located in Whiteside County
- Prophetstown
(2 miles [3.2 km] to the southeast)
- Lyndon
(2 miles [3.2 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Lyndon. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Lyndon
- Lyndon is located in Whiteside County
- Population from the 2020 Census: 604 people
- Jump to TripAdvisor's Tourism page for Lyndon <3>
- Fenton
(3 miles [4.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Fenton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fenton
- Fenton is located in Whiteside County
- Jump to TripAdvisor's Tourism page for Fenton <3>
- Erie
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Erie have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Erie
- Erie is located in Whiteside County
- Population from the 2020 Census: 1,482 people
- Jump to TripAdvisor's Tourism page for Erie <3>
- Sands
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Sands have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sands
- Sands is located in Whiteside County
- Morrison
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Morrison have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morrison
- Morrison is located in Whiteside County
- Population from the 2020 Census: 3,950 people
- Jump to TripAdvisor's Tourism page for Morrison <3>
- Spring Hill
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Spring Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spring Hill
- Spring Hill is located in Whiteside County
- Round Grove
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Round Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Round Grove
- Round Grove is located in Whiteside County
- Union Grove
(9 miles [14.5 km] to the north)
- Jump to our Gazetteer entry for Union Grove
- Union Grove is located in Whiteside County
- Tampico
(10 miles [16.1 km] to the southeast)
- Garden Plain
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Garden Plain have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Garden Plain
- Garden Plain is located in Whiteside County
- Yorktown
(11 miles [17.7 km] to the southeast)
- Jump to our Gazetteer entry for Yorktown
- Yorktown is located in Bureau County
- Como
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Como have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Como
- Como is located in Whiteside County
- Galt
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Galt have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Galt
- Galt is located in Whiteside County
- Jump to TripAdvisor's Tourism page for Galt <3>
- Malvern
(11 miles [17.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Malvern. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Malvern
- Malvern is located in Whiteside County
- Hillsdale
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Hillsdale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hillsdale
- Hillsdale is located in Rock Island County
- Population from the 2020 Census: 502 people
- Jump to TripAdvisor's Tourism page for Hillsdale <3>
- Emerson
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Emerson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Emerson
- Emerson is located in Whiteside County
- Ustick
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Ustick have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ustick
- Ustick is located in Whiteside County
- Hooppole
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Hooppole have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hooppole
- Hooppole is located in Henry County
- Population from the 2020 Census: 189 people
- Jump to TripAdvisor's Tourism page for Hooppole <3>
- White Pigeon
(13 miles [20.9 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for White Pigeon. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for White Pigeon
- White Pigeon is located in Whiteside County
- East Clinton
(13 miles [20.9 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for East Clinton. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for East Clinton
- East Clinton is located in Whiteside County
- Sterling
(14 miles [22.5 km] to the northeast)
- Fulton
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Fulton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fulton
- Fulton is located in Whiteside County
- Population from the 2020 Census: 3,285 people
- Jump to TripAdvisor's Tourism page for Fulton <3>
- Clinton
(14 miles [22.5 km] to the northwest)
- Albany
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Albany have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Albany
- Albany is located in Whiteside County
- Population from the 2020 Census: 856 people
- Jump to TripAdvisor's Tourism page for Albany <3>
Off-the-Road Links ...
The official website for Whiteside County: www.whiteside.org/ The official website for State of Illinois: https://illinois.gov
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Hamilton Corners, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|