RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Illinois >> Henry County >> Geneseo >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Illinois

The Commemorative Quarter for Illinois





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Geneseo. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Geneseo.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Geneseo - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 70 communities listed:

  • Albany
    (23 miles [37 km] to the north)
    • Note: The GPS coordinates that we are using for Albany have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Albany
    • Albany is located in Whiteside County
    • Population from the 2020 Census: 856 people
    • Jump to TripAdvisor's Tourism page for Albany <3>
  • Alpha
    (21 miles [33.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Alpha have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Alpha
    • Alpha is located in Henry County
    • Population from the 2020 Census: 626 people
    • Jump to TripAdvisor's Tourism page for Alpha <3>
  • Altona
    (23 miles [37 km] to the south)
  • Andalusia
    (29 miles [46.7 km] to the west)
    • Note: The GPS coordinates that we are using for Andalusia have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Andalusia
    • Andalusia is located in Rock Island County
    • Population from the 2020 Census: 1,140 people
    • Jump to TripAdvisor's Tourism page for Andalusia <3>
  • Andover
    (12 miles [19.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Andover have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Andover
    • Andover is located in Henry County
    • Population from the 2020 Census: 565 people
    • Jump to TripAdvisor's Tourism page for Andover <3>
  • Annawan
    (13 miles [20.9 km] to the east)
    • Note: The GPS coordinates that we are using for Annawan have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Annawan
    • Annawan is located in Henry County
    • Population from the 2020 Census: 843 people
    • Jump to TripAdvisor's Tourism page for Annawan <3>
  • Atkinson
    (7 miles [11.3 km] to the east)
    • Note: The GPS coordinates that we are using for Atkinson have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Atkinson
    • Atkinson is located in Henry County
    • Population from the 2020 Census: 955 people
    • Jump to TripAdvisor's Tourism page for Atkinson <3>
  • Barstow
    (11 miles [17.7 km] to the northwest)
  • Bettendorf
    (19 miles [30.6 km] to the west)
  • Bishop Hill
    (17 miles [27.4 km] to the south)
    • Note: The GPS coordinates that we are using for Bishop Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bishop Hill
    • Bishop Hill is located in Henry County
    • Population from the 2020 Census: 121 people
    • Jump to TripAdvisor's Tourism page for Bishop Hill <3>
  • Buda
    (25 miles [40.2 km] to the east)
    • Note: The GPS coordinates that we are using for Buda have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Buda
    • Buda is located in Bureau County
    • Population from the 2020 Census: 497 people
    • Jump to TripAdvisor's Tourism page for Buda <3>
  • Camanche
    (23 miles [37 km] to the north)
    • Jump to our Gazetteer entry for Camanche
    • Camanche is located in Clinton County (IA)
    • Population from the 2020 Census: 4,368 people
    • Jump to TripAdvisor's Tourism page for Camanche <3>
  • Cambridge
    (10 miles [16.1 km] to the south)
  • Carbon Cliff
    (12 miles [19.3 km] to the west)
    • Note: The GPS coordinates that we are using for Carbon Cliff have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Carbon Cliff
    • Carbon Cliff is located in Rock Island County
    • Population from the 2020 Census: 1,932 people
    • Jump to TripAdvisor's Tourism page for Carbon Cliff <3>
  • Clinton
    (27 miles [43.5 km] to the north)
    • Jump to our Gazetteer entry for Clinton
    • Clinton is located in Clinton County (IA)
    • Population from the 2020 Census: 25,039 people
    • Jump to TripAdvisor's Tourism page for Clinton <3>
  • Coal Valley
    (15 miles [24.1 km] to the west)
    • Note: The GPS coordinates that we are using for Coal Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Coal Valley
    • Coal Valley is located in Rock Island County
    • Population from the 2020 Census: 3,719 people
    • Jump to TripAdvisor's Tourism page for Coal Valley <3>
  • Colona
    (10 miles [16.1 km] to the west)
    • Note: The GPS coordinates that we are using for Colona have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Colona
    • Colona is located in Henry County
    • Population from the 2020 Census: 5,049 people
    • Jump to TripAdvisor's Tourism page for Colona <3>
  • Cordova
    (17 miles [27.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Cordova have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cordova
    • Cordova is located in Rock Island County
    • Population from the 2020 Census: 640 people
    • Jump to TripAdvisor's Tourism page for Cordova <3>
  • Davenport
    (22 miles [35.4 km] to the west)
  • Deer Grove
    (26 miles [41.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Deer Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Deer Grove
    • Deer Grove is located in Whiteside County
    • Population from the 2020 Census: 45 people
    • Jump to TripAdvisor's Tourism page for Deer Grove <3>
  • Eldridge
    (26 miles [41.8 km] to the northwest)
  • Elmira
    (25 miles [40.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Elmira have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Elmira
    • Elmira is located in Stark County
    • Jump to TripAdvisor's Tourism page for Elmira <3>
  • Erie
    (14 miles [22.5 km] to the north)
    • Note: The GPS coordinates that we are using for Erie have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Erie
    • Erie is located in Whiteside County
    • Population from the 2020 Census: 1,482 people
    • Jump to TripAdvisor's Tourism page for Erie <3>
  • Fenton
    (20 miles [32.2 km] to the north)
    • Note: The GPS coordinates that we are using for Fenton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fenton
    • Fenton is located in Whiteside County
    • Jump to TripAdvisor's Tourism page for Fenton <3>
  • Fulton
    (28 miles [45.1 km] to the north)
    • Note: The GPS coordinates that we are using for Fulton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fulton
    • Fulton is located in Whiteside County
    • Population from the 2020 Census: 3,285 people
    • Jump to TripAdvisor's Tourism page for Fulton <3>
  • Galt
    (30 miles [48.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Galt have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Galt
    • Galt is located in Whiteside County
    • Jump to TripAdvisor's Tourism page for Galt <3>
  • Galva
    (20 miles [32.2 km] to the south)
  • Hampton
    (14 miles [22.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Hampton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hampton
    • Hampton is located in Rock Island County
    • Population from the 2020 Census: 1,738 people
    • Jump to TripAdvisor's Tourism page for Hampton <3>
  • Hillsdale
    (11 miles [17.7 km] to the north)
    • Note: The GPS coordinates that we are using for Hillsdale have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hillsdale
    • Hillsdale is located in Rock Island County
    • Population from the 2020 Census: 502 people
    • Jump to TripAdvisor's Tourism page for Hillsdale <3>
  • Hooppole
    (13 miles [20.9 km] to the east)
    • Note: The GPS coordinates that we are using for Hooppole have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hooppole
    • Hooppole is located in Henry County
    • Population from the 2020 Census: 189 people
    • Jump to TripAdvisor's Tourism page for Hooppole <3>
  • Kewanee
    (18 miles [29 km] to the southeast)
    • Note: The GPS coordinates that we are using for Kewanee have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kewanee
    • Kewanee is located in Henry County
    • Population from the 2020 Census: 12,174 people
    • Jump to TripAdvisor's Tourism page for Kewanee <3>
  • La Fayette
    (25 miles [40.2 km] to the south)
    • Note: The GPS coordinates that we are using for La Fayette have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for La Fayette
    • La Fayette is located in Stark County
    • Population from the 2020 Census: 195 people
    • Jump to TripAdvisor's Tourism page for La Fayette <3>
  • Le Claire
    (14 miles [22.5 km] to the northwest)
  • Long Grove
    (27 miles [43.5 km] to the northwest)
  • Low Moor
    (26 miles [41.8 km] to the northwest)
  • Lyndon
    (21 miles [33.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Lyndon have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lyndon
    • Lyndon is located in Whiteside County
    • Population from the 2020 Census: 604 people
    • Jump to TripAdvisor's Tourism page for Lyndon <3>
  • Lynn Center
    (15 miles [24.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Lynn Center have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lynn Center
    • Lynn Center is located in Henry County
    • Jump to TripAdvisor's Tourism page for Lynn Center <3>
  • Manlius
    (25 miles [40.2 km] to the east)
  • Matherville
    (26 miles [41.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Matherville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Matherville
    • Matherville is located in Mercer County
    • Population from the 2020 Census: 651 people
    • Jump to TripAdvisor's Tourism page for Matherville <3>
  • Milan
    (21 miles [33.8 km] to the west)
    • Jump to our Gazetteer entry for Milan
    • Milan is located in Rock Island County
    • Population from the 2020 Census: 4,945 people
    • Jump to TripAdvisor's Tourism page for Milan <3>
  • Mineral
    (17 miles [27.4 km] to the east)
  • Moline
    (19 miles [30.6 km] to the west)
    • Jump to our Gazetteer entry for Moline
    • Moline is located in Rock Island County
    • Population from the 2020 Census: 41,065 people
    • Jump to TripAdvisor's Tourism page for Moline <3>
  • Morrison
    (26 miles [41.8 km] to the north)
    • Note: The GPS coordinates that we are using for Morrison have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Morrison
    • Morrison is located in Whiteside County
    • Population from the 2020 Census: 3,950 people
    • Jump to TripAdvisor's Tourism page for Morrison <3>
  • Neponset
    (21 miles [33.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Neponset have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Neponset
    • Neponset is located in Bureau County
    • Population from the 2020 Census: 430 people
    • Jump to TripAdvisor's Tourism page for Neponset <3>
  • New Bedford
    (22 miles [35.4 km] to the east)
    • Note: The GPS coordinates that we are using for New Bedford have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Bedford
    • New Bedford is located in Bureau County
    • Population from the 2020 Census: 69 people
    • Jump to TripAdvisor's Tourism page for New Bedford <3>
  • North Henderson
    (29 miles [46.7 km] to the southwest)
  • Oneida
    (26 miles [41.8 km] to the south)
  • Orion
    (13 miles [20.9 km] to the southwest)
  • Osco
    (9 miles [14.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Osco have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Osco
    • Osco is located in Henry County
    • Jump to TripAdvisor's Tourism page for Osco <3>
  • Pleasant Valley
    (16 miles [25.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Pleasant Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pleasant Valley
    • Pleasant Valley is located in Scott County (IA)
    • Jump to TripAdvisor's Tourism page for Pleasant Valley <3>
  • Port Byron
    (14 miles [22.5 km] to the northwest)
  • Preemption
    (24 miles [38.6 km] to the southwest)
    • Note: The GPS coordinates that we are using for Preemption have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Preemption
    • Preemption is located in Mercer County
    • Jump to TripAdvisor's Tourism page for Preemption <3>
  • Princeton
    (18 miles [29 km] to the northwest)
    • Note: The GPS coordinates that we are using for Princeton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Princeton
    • Princeton is located in Scott County (IA)
    • Population from the 2020 Census: 955 people
    • Jump to TripAdvisor's Tourism page for Princeton <3>
  • Prophetstown
    (18 miles [29 km] to the northeast)
  • Rapids City
    (13 miles [20.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Rapids City have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rapids City
    • Rapids City is located in Rock Island County
    • Population from the 2020 Census: 962 people
    • Jump to TripAdvisor's Tourism page for Rapids City <3>
  • Reynolds
    (28 miles [45.1 km] to the west)
  • Rio
    (26 miles [41.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Rio have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rio
    • Rio is located in Knox County
    • Population from the 2020 Census: 205 people
    • Jump to TripAdvisor's Tourism page for Rio <3>
  • Rock Island
    (21 miles [33.8 km] to the west)
  • Sheffield
    (22 miles [35.4 km] to the east)
    • Note: The GPS coordinates that we are using for Sheffield have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sheffield
    • Sheffield is located in Bureau County
    • Population from the 2020 Census: 855 people
    • Jump to TripAdvisor's Tourism page for Sheffield <3>
  • Sherrard
    (20 miles [32.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for Sherrard have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sherrard
    • Sherrard is located in Mercer County
    • Population from the 2020 Census: 588 people
    • Jump to TripAdvisor's Tourism page for Sherrard <3>
  • Silvis
    (13 miles [20.9 km] to the west)
    • Note: The GPS coordinates that we are using for Silvis have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Silvis
    • Silvis is located in Rock Island County
    • Population from the 2020 Census: 7,473 people
    • Jump to TripAdvisor's Tourism page for Silvis <3>
  • Tampico
    (22 miles [35.4 km] to the northeast)
  • Taylor Ridge
    (27 miles [43.5 km] to the west)
    • Note: The GPS coordinates that we are using for Taylor Ridge have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Taylor Ridge
    • Taylor Ridge is located in Rock Island County
    • Jump to TripAdvisor's Tourism page for Taylor Ridge <3>
  • Toulon
    (28 miles [45.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Toulon have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Toulon
    • Toulon is located in Stark County
    • Population from the 2020 Census: 1,144 people
    • Jump to TripAdvisor's Tourism page for Toulon <3>
  • Victoria
    (28 miles [45.1 km] to the south)
    • Note: The GPS coordinates that we are using for Victoria have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Victoria
    • Victoria is located in Knox County
    • Population from the 2020 Census: 282 people
    • Jump to TripAdvisor's Tourism page for Victoria <3>
  • Viola
    (28 miles [45.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Viola have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Viola
    • Viola is located in Mercer County
    • Population from the 2020 Census: 874 people
    • Jump to TripAdvisor's Tourism page for Viola <3>
  • Walnut
    (29 miles [46.7 km] to the east)
  • Wataga
    (30 miles [48.3 km] to the south)
  • Woodhull
    (20 miles [32.2 km] to the southwest)
    • Note: The GPS coordinates that we are using for Woodhull have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Woodhull
    • Woodhull is located in Henry County
    • Population from the 2020 Census: 771 people
    • Jump to TripAdvisor's Tourism page for Woodhull <3>
  • Wyanet
    (30 miles [48.3 km] to the east)
    • Note: The GPS coordinates that we are using for Wyanet have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wyanet
    • Wyanet is located in Bureau County
    • Population from the 2020 Census: 914 people
    • Jump to TripAdvisor's Tourism page for Wyanet <3>

Unfortunately, we don't know of an official website for Geneseo. If you can help, please contact us through our Feedback Page.

The official website for Henry County: www.henrycty.com/

The official website for State of Illinois: https://illinois.gov

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Geneseo) to Point B.Our distance measurements begin at a specific point in Geneseo. The point we use is located at these GPS coordinates - Latitude: 41.4500, Longitude: -90.1534       In this case, the coordinates for Geneseo have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 22 Nov 2024