Nearby Communities in the 1890s

We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Cherry Hill Estates in the Atlas, the following communities of the 1890's would have been found near the current location of Cherry Hill Estates. The following communities are listed based on their distance, with the one closest to Cherry Hill Estates listed first.

Mount Carmel
(Less than 2 miles to the south)
- Jump to our Gazetteer entry for Mount Carmel
- Mount Carmel is located in Wabash County
- Population from the 2020 Census: 6,813 people
- Jump to TripAdvisor's Tourism page for Mount Carmel <2>
Patton
(3 miles [4.8 km] to the north)
- Note: The GPS coordinates that we are using for Patton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Patton
- Patton is located in Wabash County
Maud
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Maud have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maud
- Maud is located in Wabash County
Friendsville
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Friendsville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Friendsville
- Friendsville is located in Wabash County
Lyles
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Lyles have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lyles
- Lyles is located in Gibson County (IN)
Keensburg
(7 miles [11.3 km] to the southwest)
- Jump to our Gazetteer entry for Keensburg
- Keensburg is located in Wabash County
- Population from the 2020 Census: 194 people
- Jump to TripAdvisor's Tourism page for Keensburg <2>
Allendale
(7 miles [11.3 km] to the north)
- Jump to our Gazetteer entry for Allendale
- Allendale is located in Wabash County
- Population from the 2020 Census: 463 people
- Jump to TripAdvisor's Tourism page for Allendale <2>
Bellmont
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Bellmont have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bellmont
- Bellmont is located in Wabash County
- Population from the 2020 Census: 260 people
- Jump to TripAdvisor's Tourism page for Bellmont <2>
Gards Point
(8 miles [12.9 km] to the west)
- Note: The GPS coordinates that we are using for Gards Point have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gards Point
- Gards Point is located in Wabash County
Patoka
(9 miles [14.5 km] to the east)
- Jump to our Gazetteer entry for Patoka
- Patoka is located in Gibson County (IN)
- Population from the 2020 Census: 784 people
Petersburg
(11 miles [17.7 km] to the north)
- Jump to our Gazetteer entry for Petersburg
- Petersburg is located in Lawrence County
- Jump to TripAdvisor's Tourism page for Petersburg <2>
Owensville
(11 miles [17.7 km] to the south)
- Jump to our Gazetteer entry for Owensville
- Owensville is located in Gibson County (IN)
- Population from the 2020 Census: 1,356 people
- Jump to TripAdvisor's Tourism page for Owensville <2>
Princeton
(11 miles [17.7 km] to the southeast)
- Jump to our Gazetteer entry for Princeton
- Princeton is located in Gibson County (IN)
- Population from the 2020 Census: 8,793 people
- Jump to TripAdvisor's Tourism page for Princeton <2>
Browns
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Browns have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Browns
- Browns is located in Edwards County
- Population from the 2020 Census: 128 people
- Jump to TripAdvisor's Tourism page for Browns <2>
Cowling
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Cowling have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cowling
- Cowling is located in Wabash County
Beal
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Beal have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beal
- Beal is located in Knox County (IN)
Saint Francisville
(12 miles [19.3 km] to the northeast)
- Jump to our Gazetteer entry for Saint Francisville
- Saint Francisville is located in Lawrence County
- Population from the 2020 Census: 610 people
- Jump to TripAdvisor's Tourism page for Saint Francisville <2>
Mills Prairie ‑ Historic
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Mills Prairie have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mills Prairie
- Mills Prairie is located in Edwards County
Bone Gap
(12 miles [19.3 km] to the west)
- Jump to our Gazetteer entry for Bone Gap
- Bone Gap is located in Edwards County
- Population from the 2020 Census: 232 people
- Jump to TripAdvisor's Tourism page for Bone Gap <2>
McGary
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for McGary have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McGary
- McGary is located in Gibson County (IN)
King
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for King have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for King
- King is located in Gibson County (IN)
Red Top
(14 miles [22.5 km] to the west)
- Note: The GPS coordinates that we are using for Red Top have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Top
- Red Top is located in Edwards County
Mounts
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Mounts have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mounts
- Mounts is located in Gibson County (IN)
Decker
(14 miles [22.5 km] to the northeast)
- Jump to our Gazetteer entry for Decker
- Decker is located in Knox County (IN)
- Population from the 2020 Census: 244 people
Berryville
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Berryville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Berryville
- Berryville is located in Richland County
West Salem
(14 miles [22.5 km] to the northwest)
- Jump to our Gazetteer entry for West Salem
- West Salem is located in Edwards County
- Population from the 2020 Census: 844 people

Off-the-Road Links ...

The official website for State of Illinois: https://illinois.gov

Footnotes ...

<1>	We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Cherry Hill Estates, please let us know so that we can improve our accuracy.
<2>	While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>	The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.