RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Illinois >> Whiteside County >> Washington Road Cemetery >> Nearby CommunitiesIndex...










Learn About
The Commemorative
Quarter for
Illinois

The Commemorative Quarter for Illinois





Nearby Communities

Introduction

Below you will find our list of the communities that are in the vicinity of the Washington Road Cemetery.

Just a reminder ...

Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Washington Road Cemetery.

List of Neighboring Communities ...

Below are the communities that are within 30 miles [48.3 km]<1> of the Washington Road Cemetery. We've listed the following communities based on their distance, with the closest first.

  • Prophetstown
    (3 miles [4.8 km] to the northeast)
  • Lyndon
    (6 miles [9.7 km] to the north)
    • Note: We haven't been able to verify our GPS coordinates for Lyndon. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Lyndon
    • Lyndon is located in Whiteside County
    • Population from the 2020 Census: 604 people
    • Jump to TripAdvisor's Tourism page for Lyndon <2>
  • Erie
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for Erie have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Erie
    • Erie is located in Whiteside County
    • Population from the 2020 Census: 1,482 people
    • Jump to TripAdvisor's Tourism page for Erie <2>
  • Yorktown
    (7 miles [11.3 km] to the southeast)
    • Jump to our Gazetteer entry for Yorktown
    • Yorktown is located in Bureau County
  • Fenton
    (7 miles [11.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Fenton have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fenton
    • Fenton is located in Whiteside County
    • Jump to TripAdvisor's Tourism page for Fenton <2>
  • Hooppole
    (8 miles [12.9 km] to the south)
    • Note: The GPS coordinates that we are using for Hooppole have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hooppole
    • Hooppole is located in Henry County
    • Population from the 2020 Census: 189 people
    • Jump to TripAdvisor's Tourism page for Hooppole <2>
  • Tampico
    (9 miles [14.5 km] to the east)
  • Newton Corners
    (10 miles [16.1 km] to the northwest)
    • Jump to our Gazetteer entry for Newton Corners
    • Newton Corners is located in Whiteside County
  • Hillsdale
    (10 miles [16.1 km] to the west)
    • Note: The GPS coordinates that we are using for Hillsdale have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hillsdale
    • Hillsdale is located in Rock Island County
    • Population from the 2020 Census: 502 people
    • Jump to TripAdvisor's Tourism page for Hillsdale <2>
  • Morrison
    (11 miles [17.7 km] to the north)
    • Note: The GPS coordinates that we are using for Morrison have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Morrison
    • Morrison is located in Whiteside County
    • Population from the 2020 Census: 3,950 people
    • Jump to TripAdvisor's Tourism page for Morrison <2>
  • Joslin
    (14 miles [22.5 km] to the southwest)
    • Jump to our Gazetteer entry for Joslin
    • Joslin is located in Rock Island County
  • Union Grove
    (14 miles [22.5 km] to the north)
    • Jump to our Gazetteer entry for Union Grove
    • Union Grove is located in Whiteside County
  • Deer Grove
    (14 miles [22.5 km] to the east)
    • Note: The GPS coordinates that we are using for Deer Grove have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Deer Grove
    • Deer Grove is located in Whiteside County
    • Population from the 2020 Census: 45 people
    • Jump to TripAdvisor's Tourism page for Deer Grove <2>
  • Geneseo
    (15 miles [24.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Geneseo have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Geneseo
    • Geneseo is located in Henry County
    • Population from the 2020 Census: 6,505 people
    • Jump to TripAdvisor's Tourism page for Geneseo <2>
  • Atkinson
    (15 miles [24.1 km] to the south)
    • Note: The GPS coordinates that we are using for Atkinson have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Atkinson
    • Atkinson is located in Henry County
    • Population from the 2020 Census: 955 people
    • Jump to TripAdvisor's Tourism page for Atkinson <2>
  • New Bedford
    (15 miles [24.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for New Bedford have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Bedford
    • New Bedford is located in Bureau County
    • Population from the 2020 Census: 69 people
    • Jump to TripAdvisor's Tourism page for New Bedford <2>
  • Galt
    (15 miles [24.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Galt have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Galt
    • Galt is located in Whiteside County
    • Jump to TripAdvisor's Tourism page for Galt <2>
  • Malvern
    (15 miles [24.1 km] to the north)
    • Note: We haven't been able to verify our GPS coordinates for Malvern. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for Malvern
    • Malvern is located in Whiteside County
  • Annawan
    (16 miles [25.7 km] to the south)
    • Note: The GPS coordinates that we are using for Annawan have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Annawan
    • Annawan is located in Henry County
    • Population from the 2020 Census: 843 people
    • Jump to TripAdvisor's Tourism page for Annawan <2>
  • Albany
    (16 miles [25.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Albany have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Albany
    • Albany is located in Whiteside County
    • Population from the 2020 Census: 856 people
    • Jump to TripAdvisor's Tourism page for Albany <2>
  • Hickory Hills
    (17 miles [27.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Hickory Hills have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hickory Hills
    • Hickory Hills is located in Henry County
  • Rock Falls
    (17 miles [27.4 km] to the northeast)
  • Sterling
    (17 miles [27.4 km] to the northeast)
  • East Clinton
    (17 miles [27.4 km] to the northwest)
    • Note: We haven't been able to verify our GPS coordinates for East Clinton. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for East Clinton
    • East Clinton is located in Whiteside County
  • Spring Valley
    (18 miles [29 km] to the north)
    • Jump to our Gazetteer entry for Spring Valley
    • Spring Valley is located in Whiteside County
  • Rustic Acres
    (18 miles [29 km] to the southwest)
    • Jump to our Gazetteer entry for Rustic Acres
    • Rustic Acres is located in Rock Island County
  • Mineral
    (18 miles [29 km] to the south)
  • Fulton
    (18 miles [29 km] to the northwest)
    • Note: The GPS coordinates that we are using for Fulton have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fulton
    • Fulton is located in Whiteside County
    • Population from the 2020 Census: 3,285 people
    • Jump to TripAdvisor's Tourism page for Fulton <2>
  • White Pigeon
    (18 miles [29 km] to the north)
    • Note: We haven't been able to verify our GPS coordinates for White Pigeon. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to our Gazetteer entry for White Pigeon
    • White Pigeon is located in Whiteside County
  • Clinton
    (18 miles [29 km] to the northwest)
    • Jump to our Gazetteer entry for Clinton
    • Clinton is located in Clinton County (IA)
    • Population from the 2020 Census: 25,039 people
    • Jump to TripAdvisor's Tourism page for Clinton <2>
  • Camanche
    (18 miles [29 km] to the northwest)
    • Jump to our Gazetteer entry for Camanche
    • Camanche is located in Clinton County (IA)
    • Population from the 2020 Census: 4,368 people
    • Jump to TripAdvisor's Tourism page for Camanche <2>
  • Cordova
    (18 miles [29 km] to the west)
    • Note: The GPS coordinates that we are using for Cordova have been provided by the GNIS.<4> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cordova
    • Cordova is located in Rock Island County
    • Population from the 2020 Census: 640 people
    • Jump to TripAdvisor's Tourism page for Cordova <2>
  • Port Byron
    (18 miles [29 km] to the west)

The official website for Whiteside County: www.whiteside.org/

The official website for State of Illinois: https://illinois.gov

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Washington Road Cemetery. The point we use is located at these GPS coordinates - Latitude: 41.6345, Longitude: -89.9690       In this case, the coordinates for the Washington Road Cemetery have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 28 Apr 2025